Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
City of Tamarac Resolution R-2014-112
TR 12558 Page 1 October 6, 2014 CITY OF TAMARAC, FLORIDA RESOLUTION N o . R- 2014 - o�- A RESOLUTION OF THE CITY COMMISSION OF THE CITY OF TAMARAC, FLORIDA AUTHORIZING THE PURCHASE OF TWO (2) 2015 HORTON MODEL 623 ADVANCED LIFE SUPPORT RESCUE VEHICLES BUILT ON A 2015 INTERNATIONAL 430OLP CREW CAB CHASSIS, HORTON EMERGENCY VEHICLES COMPANY, FROM HALL -MARK FIRE APPARATUS, INC., UNDER THE FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS' ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES BID AWARD ANNOUNCEMENT NO. #11-10- 12021 SPECIFICATION 02, AUTHORIZING THE APPROPRIATE CITY OFFICIALS TO EXECUTE A SCHEDULE OF PROPERTY AND ASSOCIATED EXHIBITS RELATED TO THE MASTER LEASE/PURCHASE AGREEMENT WITH THE BANC OF AMERICA PUBLIC CAPITAL CORPORATION IN THE PRINCIPAL AMOUNT OF $555,824 TO FINANCE THE COST OF THE EQUIPMENT DESCRIBED HEREIN UPON ACCEPTANCE OF SAID EQUIPMENT BY THE CITY AT A RATE NOT TO EXCEED THREE AND ONE-HALF PERCENT (3.5%) WITHOUT FURTHER AUTHORIZATION AND APPROVAL BY THE CITY; PROVIDING FOR CONFLICTS; PROVIDING FOR SEVERABILITY; AND PROVIDING FOR AN EFFECTIVE DATE. 0 WHEREAS, Tamarac Fire Rescue provides fire rescue services including fire suppression, response to vehicle and industrial accidents and emergency medical services to the residents, businesses and visitors in the City; and WHEREAS, the City of Tamarac desires to maintain the highest possible level of emergency medical services transportation; and WHEREAS, the purchase of two new advanced life support rescue vehicles will greatly assist the Tamarac Fire Rescue Department in maintaining apparatus reliability, TR 12558 Page 2 October 6, 2014 response times and meeting the desired level of service for our citizens, businesses and visitors; and WHEREAS, Tamarac Fire Rescue formed a cross functional Rescue Committee which consisted of Captains, Lieutenants, Firefighter -Paramedics, a Battalion Chief, a Division Chief, a City Safety Committee Representative and the Fleet Supervisor to design a rescue vehicle that is safe, functional and incorporates the requirements of Fire Rescue, attached hereto as Exhibits A and Al, and Fleet Management, attached hereto as Exhibit B; and WHEREAS, Horton Emergency Vehicles through Hall -Mark Fire Apparatus has provided the City of Tamarac a quotation, attached hereto as Exhibit C based on Florida Fire Chiefs' Association, Florida Sheriff's Association and the Florida Association of Counties Bid Award Announcement No. #11-10-1202 Specification #02, attached hereto as Exhibit D with Fire Rescue and Fleet Specific options, attached hereto as Exhibit E; and WHEREAS, the Fire Chief and the Director of Financial Services find it to be in the best interest of the City to acquire these rescue vehicles through a financial lease arrangement; and WHEREAS, funding for the rescue vehicles was approved in the biennial FY14- 15 budget; and WHEREAS, the Fire Chief and the Purchasing and Contracts Manager recommend the purchase of two (2) Horton rescue vehicles through Hall -Mark Fire Apparatus, Inc. in the amount not to exceed $555,824; and. WHEREAS, City Code §6-148 (E) allows the Purchasing Officer the authority to utilize contract prices from other governmental agencies; and TR 12558 Page 3 October 6, 2014 WHEREAS, the City of Tamarac has available for disposal two (2) Freightliner MedicMaster Rescue Vehicles (Unit # 342, 343); and WHEREAS, City Code §6-156.1 permits the disposal of Surplus Stock; and WHEREAS, the City approved Resolution 2011-123 authorizing the City to enter into a Master Lease Agreement with Banc of America Public Capital Corporation on October 26, 2011; and WHEREAS, lease rates are subject to change with market conditions; and WHEREAS, the term of the lease will be for five (5) years; and WHEREAS, the lease rate is an estimated rate of interest not to exceed 3.5% without additional authorization and approval by the City Commission; and WHEREAS, the City Commission of the City of Tamarac deems it to be in the best interest of the citizens and residents of the City of Tamarac to acquire the two (2) Horton Model 623 Advanced Life Support Rescue Vehicles through Hall -Mark Fire Apparatus, Inc. in an amount not to exceed $555,824 through the use of a financial lease. NOW THEREFORE BE IT RESOLVED BY THE CITY COMMJSSION OF THE CITY OF TAMARAC, FLORIDA: Section 1: The foregoing "WHEREAS" clauses are HEREBY ratified and confirmed as being true and correct and are HEREBY made a specific part of this Resolution. All Exhibits attached hereto are incorporated herein and made a specific part hereof. Section 2: The appropriate City Officials are HEREBY authorized to approve the lease purchase of two (2) 2015 Horton Model 623 Advanced Life Support rescue vehicles from Hall -Mark Fire Apparatus, Inc. utilizing the Florida Fire Chiefs' Association, Florida Sheriff's Association and the Florida Association of Counties Bid Award TR 12558 Page 4 October 6, 2014 Announcement 11-10-1202 Specification #02, through the use of a financial lease arrangement, with the City owning the rescues at the end of the lease arrangement, with subsequent Agreements if necessary, pending legal review and approval between the City of Tamarac and Hall -Mark Fire Apparatus, Inc. in an amount not to exceed $5551824. Section 3: That the appropriate City Officials are hereby authorized to execute a Schedule of Property and all associated exhibits related to the Master Lease/Purchase Agreement with Banc of America Public Capital Corporation in the principal amount of $555,824 for the equipment described herein upon acceptance of the equipment by the City from the manufacture for a lease term of five (5) years at a lease rate not to exceed three and on -half percent (3.5%) without further authorization and approval of the City Commission. Section 4: All Resolutions or parts of Resolutions in conflict herewith are HEREBY repealed to the extent of such conflict. Section 5: If any clause, section, other part or application of this Resolution is held by any court of competent jurisdiction to be unconstitutional or invalid, in part or in application, it shall not affect the validity of the remaining portions or applications of this Resolution. Section 6: This Resolution shall become effective immediately upon its passage and adoption. This space intentionally left blank TR 12558 Page 5 October 6, 2014 PASSED, ADOPTED AND APPROVED this �a day of A4& , 2014. ATTEST: PATRICIA TEUF CITY CLERK ICMC I HEREBY CERTIFY THAT I HAVE APPROVED THIS RESOLUTION AS TO FORM roxv/ r12-111v SAMdEL S. GORI CITY ATTORNEY HARRY DRESSLER MAYOR RECORD OF COMMISSION VOTE: MAYOR DRESSLER t16010 DIST 1: COMM. BUSHNELL�_ DIST 2: VICE MAYOR GOMEZ DIST 3: COMM. GLASSER DIST 4: COMM. PLACKO EXHIBIT A - TR12558 Horton EMERGENCY VEHICLES Hall -Mark Fire--3431 NW 27th Ave --Ocala, FL 34475 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILL WELL Year: 2015 Chassis: Navistar 108" Type: MED Model: 623 Rev I Print Features 11818 Prepared By: Michael Dav CATEGORIES: A Chassis B Body Connection Pass Thru Type BH Chassis Accessories BL Chassis Electrical C Conversion Model CB Module Body Modifications D Module Body Hardware E Paint and Striping F Cabinet Doors, Handles and Hardware G Interior Colors H Interior Cabinets, Streetside I Interior Cabinets, Curbside J Front Wall Cabinets K Interior Accessories and Trim L Cot Mount, and Patient handling M Warning Systems, Visual MN Warning Systems, Audible 0 Lights, Non Emergency P Electrical Power Group Q Heat, Ventilation, Air conditioning R Console, Radio, and communications T oxygen and Suction C Lettering and Graphics Z Other TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILLWELL • . • Horton EMERGENCY VEHICLES Horton Emergencv Vehicles Feature List ! ! ► 17 7 " BODY I LOS . Al NAVISTAR CHASSIS Selected Feature List Year: Chassis: Model: Proposal Total AINDST08 0 1 DEALER OR CUSTOMER SUPPLIED 430OLP CHASSIS, TURBO DIESEL, 1081' CIA The chassis required to complete the ambulance conversion shall be supplied by the customer or selling dealer. YEAR: 2015 MODEL: 4300 SBA LP 4X2 DEALER: MAUDLIN INTERNATIONAL DELIVERY DATE: TBD SPECIAL EQUIPMENT: 22.511 TIRES 260 HP SEE DETAILED QUOTE #Proposal: 11713-01 Note: Routing of the exhaust to the street side is not included in this option. AINSP001 0 1 SPECIAL INSTRUCTION FOR NAVISTAR CHASSIS .. PROGRAM HIGH IDLE TO 125ORPM ILOS. AJNSPICO 1 1 CHASSIS INTERIOR COLOR SHALL BE GRAY CHASSIS MODIFICATIONS, HARDWARE AND ACCESSORIES 11818 2015 Navistar 108" 623 Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2:53:40 PM Rev I Page 2 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILLWELL BH021000 . . . 0 1 TIRE SIZE, 22.519, MEDIUM DUTY: This vehicle is specified Selected Feature List Year: =Horton Chassis: .EMERGENCY VEHICLES Model. I Tota to have 22.5" tires. BH02J000 0 1 CHASSIS IS EQUIPPED WITH AIR BRAKES: This vehicle is specified to have air brakes. Note that proper tire clearances are allowed. BH03A000 1 . 1 MUD FLAPS: front Install rubber mud flaps behind each front tire. BH03B000 1 1 MUD FLAPS: rear Install individual rear mud flaps behind each set of rear wheels. BH04B000 0 1 NAVISTAR EQUIPPED W/VERTICAL EXHAUST The chassis specified above is to include a vertical exhaust. BH04G000 0 1 CHASSIS HORSEPOWER RATING IS 260HP OR HIGHER The chassis specified above will have a 4" raised cab height. Note: 300 hp V8 Maxxforce 7 engines do not require raised cab. BH060000 0 1 REAR DOCK BUMPERS Two rubber dock bumpers shall be bolted to the rear step end caps for protection when backing. BH1113000 0 1 ENERGY ABSORBING REAR FLIP -UP STEP: Install an energy absorbing rear step/bumper assembly. The center section of the step will flip up for cot loading. When flipped down the center section must be held down so as not to rattle while the vehicle is in motion. EXTEND THE DIAMOND PLATE ON REAR PORTION TO ELIMINATE GAP THIS WILL ELIMINATE THE GAP BETWEEN THE FLIP UP PORTION OF BUMPER AND THE FIXED PORTION. INSTALL SHIMS SO CENTER PORTION IS FLUSH WITH FIXED PORTION. 11818 2015 Navistar 108" 623 Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2:53:40 PM Rev 1 Page 3 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILLWELL — -F-Iar ADn MEMERGENCV VEHICLES BH2OT000 0 1 CHROME TURNOUT FOR VERTICAL EXHAUST Selected Feature List Year: Chassis: Model: Proposal Total A chrome turnout shall be installed on the vertical exhaust of medium duty chassis. BH26J000 0 1 FUEL TANK COVERS, DIAMOND PLATE FOR FOUR -DOOR CABS BH320R00 1 BH34AC00 0 BH34AD00 0 BHSPDO06 1 Diamond plate step well covers shall be installed on both the curb and street side cab step wells. The covers shall be made of .125"thick polished diamond tread plate with a minimum 3003-H14 alloy. The cover shall include a pull out tray for chassis batteries. The covers shall sized appropriately for a four -door cab. r r r INSTALL A DIAMOND PLATE COMPARTMENT BEHIND THE REAR PORTION OF THE DRIVER SIDE TANK COVER AND FORWARD PORTION OF THE PASSENGER SIDE TANK COVER. COMPARTMENTS TO BE AS LARGE AS POSSIBLE AND HAVE A HINGE DOWN DOOR WITH (2) LOCKING LEVER LATCHES. INSTALL DRAIN HOLES IN BOTTOM OF COMPARTMENT, COVER WITH HAT SECTION UNDERNEATH TO PREVENT WATER FROM COMING IN. BATTERIES TO BE LOCATED IN FORWARD PORTION OF THE PASSENGER SIDE TANK COVER. fit INSTALL LED STRIP LIGHTS ON THE TANK COVERS TO LIGHT UP THE STEPS WHEN THE CAB DOORS ARE OPENED. ! TOP STEP TO BE 7 " W FOR ENTIRE STEP ONLY FOR ALL CAB DOORS TO DUPLICATE VEHICLE #16188. 1 AIR SUSPENSION SWITCH: dump override A switch will be installed where specified, automatic dump feature activated by the left compartment entry door. Switch Locate: to override the rear patient RIGHT SIDE REAR ENTRY DOOR, JUST ABOVE HANDLE. 1 FRONT STABILIZER BAR: INT 430OLP, ROADMASTER A Roadmaster front stabilizer bar shall be installed on the International 430OLP chassis. 1 REAR STABILIZER BAR: INT 430OLP, ROADMASTER A Roadmaster rear stabilizer International 430OLP chassis. 1 MIRROR: OEM bar shall be installed on the The mirror set shall be OEM supplied, and installed by the chassis manufacturer. 11818 2015 Navistar 108" 623 Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2:53:40 PM Rev I Page 4 of 38 0 TAMARAC FIRE FESCUE Selected Feature List 11818 6000 HIATUS ROAD Year: 2015 TAMARAC FL 33321 mHOrton STEVE STILLWELL MENERGENCY VEHICLES Chassis: Navistar 10811 Model: 623 Option Std ON Headaffiesc nlData Pro osal Total BL26B000 1 1 BACKUP ALARM RESET Backup alarm to automatically reset to on if alarm was manually canceled using the control panel alarm cut-off switch (FL25) during previous use. ! ! ! DELETE THE ABILITY TO CANCEL THIS ALARM. BL26J000 0 1 REVERSE CAMERA WITH WINDSHIELD MOUNTED MONITOR Install a Voyager VCCS155 backup camera over the rear doors. Install a Voyager AOM562HD 5.611 OR 7" LCD screen in the cab upper windshield area. Wire to activate when the vehicle is placed into reverse. ! ! ! INSTALL (2) BULLET CAMERAS FOR BLIND SPOT MONITORING. LOCATE ONE ON THE STREETSIDE AND ONE CURBSIDE FORWARD CAB DOORS IN THE LOWER FORWARD POSITION. ! ! ! CAMERAS TO ACTIVATE WITH THE RESPECTIVE TURN SIGNAL. ! ! ! SYSTEM REQUIRES A VOYAGER #AOM7694 MONITOR WITH (3) INPUTS. ! ! ! INSTALL CAMERA DISPLAY ON CHASSIS DASH, CENTERED ABOVE IPLEX PANEL. BL270000 0 1 ECHOVISION REVERSE MONITORING SYSTEM Install an Echovision reverse monitoring system. BL32A000 1 1 OEM AM/FM/CD PLAYER SHALL BE PROVIDED BY THE OEM MANUFACTURER OEM AM/FM/CD player shall be provided by the OEM manufacturer on all Horton supplied chassis. Note: This option applies only to chassis supplied by Horton. Chassis supplied by either the customer or the dealer must be ordered with this feature from the chassis OEM. BL35BWNO 0 1 BUMPER WANDS, LIGHTED FOR NAVISTAR Lighted bumper wands shall be installed at the outer edges of the chassis front bumper. ! ! INSTALL AT FINAL DELIVERY. BSP00001 0 1 SPECIAL INSTRUCTION, CHASSIS MODIFICATION HARDWARE & ACCESSORIES ! SUPPLY AND INSTALL A DUAL DYNAMICS CROSSFIRE DUAL!'M TIRE PRESSURE EQUALIZATION AND MONITORING SYSTEM, 105 PSI, ONE PER PKG. (CF105STABT) CONVERSIONS Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2:53:40 PM Rev I Page 5 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILLWELL Selected Feature List Year: - mHorrton Chassis: EMERGENCY VEHICLES Model: WionMata Proposal Total CA200000 0 1 PREVIOUS VEHICLE REFERENCE This option is to be used for comparison purposes only. Specifications are specific to each order so use extreme caution when referencing a previous production order. PREVIOUS VEHICLE PRODUCTION # 1618 8 CA615000 0 1 CONVERSION MODEL: 623 INTERNATIONAL PASS -THROUGH: MINIMUM BODY DIMENSIONS: (Exterior) -Height: 91" -Width: 96" -Length: 173" (Interior) -Height: 72" -Aisle 20" -Width: 20"(from edge of cot in wall position to squad bench riser) -Length: 169" OVERALL DIMENSIONS (Including Chassis, Module and Step): -Height: 110" (to top of vent) -Width: 100" -Length: 296" ! ! ! BODY TO BE 17711 WITH A 112" CA. CA615001 1 1 623 STREETSIDE FORWARD: Clear Door Opening: 18.7" wide x 80.6" high Actual Compartment 21.4" wide x 83.6" high x 21.3" This area shall be accessed through a single outside hinged door. The compartment shall house the vehicle's primary 02 cylinder. The compartment shall be vented to the outside. ! ! ! INSTALL A COMPARTMENT THAT IS 21 " HIGH ABOVE THE 02 COMPARTMENT. THIS COMPARTMENT WILL BE USED FOR STORAGE OF ALL ADD ON ELECTRICAL EQUIPMENT, BREAKER BOXES, BATTERY CHARGER, VACUUM PUMP AND AIR COMPRESSOR. 1.1 ! SUPPLY AND INSTALL A "D" BOTTLE STORAGE BOX TO FIT (4) BOTTLES. INSTALL ON THE TOP OF THE ADJUSTABLE SHELF. STORAGE TO BE 5 " ID. ! ! ! ! ! HORTON ENGINEERING DOES NOT RECOMMEND THE ABOVE STORAGE. 0 1 COMPARTMENT HEIGHT Modify: first, street side cb040000 The height of the standard compartment for this model shall be modified. This is the first street side compartment height modification and shall include affected modifications to the interior cabinet. Height Modification: REDUCE 22.0011 TO ALLOW FOR INSTALLATION OF ADDITIONAL ELECTRICAL COMPARTMENT ABOVE THE STREETSIDE FORWARD COMPARTMENT. 11818 2015 Navistar 108" 623 Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2:53:41 PM Rev I Page 6 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILL WELL . mHomon 1111111 NEMERGEMCY VE cros Selected Feature List Year: Chassis: . Model: Proposal Total 0 1 SHELF FOR LED LIGHTED VERTICAL COMPARTMENT dr081000 A diamond plate adjustable shelf shall be installed in the following location. Locate: ABOVE 02 SYSTEM ! ! ! 25 " PLATE WITH NO LIPS ILOS . 0 1 OXYGEN BOTTLE BRACKET: Zico OTS electric tnO1e000 Electric operated oxygen bottle mount for cylinder loading and securing. Controls to be mounted on the in side of the compartment door. Bottle size: "M" Compartment: STREETSIDE FORWARD (NOTE --COMPARTMENT DEPTH MUST BE A MINIMUM OF 16 " FOR THE BRACKET TO WORK PROPERLY) . CA615002 1 1 623 STREETSIDE INTERMEDIATE: Clear Door Opening: 51.7" wide x 39.8" high Actual Dimensions: 55.4" wide x 43.0" high x 21.3" This area shall be accessed through double, outside hinged doors. Both doors shall have exterior door handles and latching devices. ! ! ! SUPPLY AND INSTALL (3) ZICO #SC-50-H- 6-SF BOTTLE HOLDERS WITH PHS STRAP ON THE BACK WALL OF COMPARTMENT. THESE ARE TO BE SPACED EVENLY. 0 1 COMPARTMENT WIDTH Modify: first, street side cb040W00 The width of the standard compartment for this model shall be modified. This is the first street side compartment width modification and shall include affected modifications to the interior cabinet. Width Modification: INCREASE 4" DUE TO ADDITIONAL BODY LENGTH 0 1 SHELF FOR LED LIGHTED DOUBLE DOOR COMPARTMENT dr091b00 A diamond plate adjustable shelf shall be installed in the area listed below. LOCATE: UPPER PORTION OF COMPARTMENT ABOVE THE BOTTLE BRACKETS !!! SHELF TO BE STANDARD. CA615004 1 1 623 STREETSIDE REAR: Clear Door Opening: 32.0" wide x 39.8" high Actual Dimensions: 37.4" wide x 43.0" high x 21.3" This area shall be accessed through double, outside hinged doors. Both doors shall have exterior door handles and latching devices: 0 2 SHELF FOR LED LIGHTED VERTICAL COMPARTMENT dr081000 A diamond plate adjustable shelf shall be installed in the following location. Locate: SPACED EVENLY 11818 2015 Navistar 108" 623 Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2: 53: 42 PM Rev I Page 7 of 38 TAMARAC FIRE RESCUE Selected Feature List 11818 6000 HIATUS ROAD Year: 2015 TAMARAC, FL 33321 mHomon STEVE STILLWELL MEMERG+ENCYVEMCLES Chassis: Navistar 108" Model 623 Option SO AN )1 d r D Proposal Tote CA615005 1 1 623 CURBSIDE REAR: Clear Door Opening: 25.0" wide x 80.6" high Actual Dimensions: 29.6" wide x 83.6" high x 21.3" This area shall be accessed through a single outside hinged door ! ! INSTALL A BACKBOARD RETENTION BAR IN UPPER REAR PORTION, APPROX 8 " FROM COMPARTMENT CEILING. 0 3 SHELF FOR LED LIGHTED VERTICAL COMPARTMENT dr081000 A diamond plate adjustable shelf shall be installed in the following location. Locate: BETWEEN DIVIDER AND RIGHT WALL WITH BOTTOM SHELF INSTALLED 40" FROM FLOOR OF COMPARTMENT Locate: FIXED SHELF LOCATED 10 " FROM FLOOR, LEFT SIDE OF DIVIDER 0 1 DIVIDER FIXED, VERTICAL COMPARTMENT dr11a000 Install a 16" deep fixed vertical divider shall be installed in the location listed below. (Divider material is to match the compartment material) Locate: 14" FROM RIGHT WALL 0 1 ROK BACKBOARD STRAP dr12a000 Install a ROK backboard strap in the designated backboard compartment. CA615006 1 1 623 CURBSIDE FORWARD: Clear Door Opening: 22.1" wide x 83.6" high Actual Dimensions: 27.2" wide x 86.6" high x 30" This area shall be accessed through a single outside hinged door and from an opening located on the curb side forward wall. The area shall be primarily used for storage of customer furnished jump kits. CAB93AFO 0 1 KKK-A-1822F CERTIFICATION LABEL The vehicle shall have weight/payload, electrical load and KKK-A- 1822F certification stickers installed in the 02 compartment. B BODY MODIFICATIONS/OPTIONS Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2.53:43 PM Rev I .Page 8 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILL WELL • . • mHoMon MEMERGrENCY VEHICLES Selected Feature List Year: Chassis: Model: Proposal Total CB030000 0 4 MODULE HEAD ROOM, INCREASE FROM STANDARD (PER INCH) The standard module body headroom shall be increased from standard per the quantity listed below. The quantity represents inches and must be in increments of 2". Headroom Required: 76. 00 " CB06SX00 0 1 DOUBLE STEP CURBSIDE ENTRY 6" DROP SKIRT The curbside skirt, forward of the rear wheel well shall be dropped 6 inches. Two integral ALD steps within the side patient door step well shall be available upon opening the side door for easier and lower access to the patient compartment. CB06SX10 0 1 STREETSIDE OF BODY LOWERED 6" FROM STANDARD CB09SA00 CLl • U1' CBSP0002 The street side of the body forward of the rear wheel well shall be lowered 6" from standard. 1 1 PATIENT AREA SOUND PROOFING/ACOUSTIC ENHANCEMENT PACKAGE Install standard sound control package. 0 1 SPECIAL INSTRUCTION, BODY MODIFICATIONS ! ! ! SUPPLY AND INSTALL (3) CAST PRODUCTS SCBA STORAGE ACCESS DOORS AND TUBES WITH NON LOCKING STYLE DOORS AS FOLLOWS (1) CURBSIDE REAR (1) STREETSIDE FORWARD (1) STREETSIDE REAR SEE DRAWING. ! ! ! MODIFY TUBE STRUCTURE AND WHEEL HOUSES AS NEEDED FOR THIS INSTALLATION. NOTE STORAGE BELOW CPR SEAT. ! ! ! INSTALL RIBBED RUBBER MATTING IN THE BOTTOMS OF THE BOTTLE STORAGE TUBES. GLUE RUBBER MATTING DOWN SO IT WILL NOT SLIDE OUT WHEN BOTTLES ARE REMOVED. ! ! ! CURBSIDE WHEEL HOUSE TO EXTEND TO REAR COMPATMENT . 0 1 SPECIAL INSTRUCTION, BODY MODIFICATIONS ! ! ! INSTALL A FLAT ALUMINUM COMPARTMENT THR O UGH THE CENTER OF THE REAR DIAMOND PLATE RISER PER DRAWING. COMPARTMENT TO BE AS LARGE AS POSSIBLE. INCLUDE A HINGE -DOWN DIAMOND PLATE DOOR WITH A SINGLE LOCKING D-RING STYLE HANDLE. fit INCLUDE "DOOR OPEN" SENSOR FOR INTELLIPLEX WARNING. COMPARTMENT DOES NOT INCLUDE POWER DOOR LOCK OR LIGHTING. 11818 2015 Navistar 108" 623 Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2:53:43PM Rev I Page 9 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILLWELL . mHorton EMERGENCY VEHICLES CBSP0003 0 1 SPECIAL INSTRUCTION, BODY MODIFICATIONS Selected Feature List Year: Chassis: Model: Proposal Total ! ! ! INSTALL A COMPARTMENT THAT IS 21 " HIGH ABOVE THE 02 COMPARTMENT. THIS COMPARTMENT WILL BE USED FOR STORAGE OF ALL ADD ON ELECTRICAL EQUIPMENT, BREAKER BOXES, BATTERY CHARGER, VACUUM PUMP AND AIR COMPRESSOR. INCLUDE PERKO VENT IN COMPARTMENT DOOR. CBSP0004 0 1 SPECIAL INSTRUCTION, BODY MODIFICATIONS ! ! ! THIS BODY TO BE 4. 0 0 " LONGER BETWEEN THE CAB AND REAR WHEELS. THE ADDITIONAL LENGTH IS TO BE ADDED TO THE INTERMEDIATE COMPARTMENT ON STREETSIDE AND BETWEEN THE REAR OF THE SIDE ACCESS DOOR AND THE FORWARD END OF THE WHEELHOUSE ON CURBSIDE. CBSP0005 0 1 SPECIAL INSTRUCTION, BODY MODIFICATIONS ! ! MODIFY BODY AS NECESSARY FOR PULL OUT STEP AT SIDE ENTRY DOOR PER DH280000. CBSP0006 0 1 SPECIAL INSTRUCTION, BODY MODIFICATIONS ! ! REINFORCE PATIENT CEILING AND BULKHEAD WALL AS NECESSARY FOR INSTALL OF MEDVAULT UNIT OVER PASS THROUGH PER DRAWING. CBSP0007 0 1 SPECIAL INSTRUCTION, BODY MODIFICATIONS ! ! ! REINFORCE PATIENT COMPARTMENT FLOOR FOR HORTON TO INSTALL CUSTOMER SUPPLIED STRYKER POWER LOAD SYSTEM. CBSP0008 0 1 SPECIAL INSTRUCTION, BODY MODIFICATIONS fit CURBSIDE WHEEL WELL COMPARTMENT/PULL OUT DRAWER fit A COMPARTMENT SHALL BE CONSTRUCTED ABOVE THE CURBSIDE WHEELHOUSE. THE DOOR FOR THIS COMPARTMENT IS TO BE FIXED TO THE FACE OF A SLIDE -OUT TRAY HOUSED WITHIN THE COMPARTMENT. INSTALL ACCURIDE SLIDES ON TRAY. THIS COMPARTMENT IS TO BE ACCESSIBLE FROM BOTH INSIDE AND OUTSIDE. CBSP0009 0 1 SPECIAL INSTRUCTION, BODY MODIFICATIONS ! ! ! NOTE SIDE SCENE LIGHTS WHEN INSTALLING BODY TUBES. MODULE BODY HARDWARE 11818 2015 Navistar 108" 623 Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2:53:4.3 PM Rev I Page 10 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILLWELL . allomon EMERGENCY VEHICLES Selected Feature List Year: Chassis: Model: Proposal Total DG05C100 0 2 PRIVACY WINDOWS, REAR MODULE BODY ENTRY DOORS The rear module entry doors shall have solid windows. shall have dark privacy glass. The windows shall meet standards. No films are to be used. DG06A000 1 DG06C200 0 DG080000 DH000000 DH03B000 1 r ► 1 THESE ARE TO BE SLIDING PRIVACY WINDOWS. 1 WINDOW, CURBSIDE OF BODY ABOVE SQUAD BENCH The windows FMVSS glazing A fixed window shall be installed on the curbside of the body above the squad bench. 1 PRIVACY WINDOW, SLIDING FOR SIDE ENTRY DOOR The side entry door shall have a sliding window. The window shall have dark privacy glass. The window shall meet FMVSS glazing standards. No films are to be used. 1 EMERGENCY DOOR RELEASE MECHANISM Install standard emergency release knobs on top and bottom of rear module entrance doors. 1 1 VI -Tech body mounts Install standard Vi-Tech body mounts. 1 1 MIRROR STAINLESS STEEL SPLASH SHIELDS Install #8 mirror stainless splash shields on of the body just behind the cab access doors. are to be the same height as the diamond plate the lower front face These splash shields front corner guards. (NOT AVAILABLE ON FORD 'FE" SERIES CHASSIS IN CONJUNCTION WITH EXTENDED CORNER GUARDS) DH04B000 0 1 MODULE BODY FENDERS: rubber Rubber extruded fenders shall be installed around the rear wheel well opening. 11818 2015 Navistar 108" 623 Hall -Mark Fire Monday, September 22, 2014 Prins Features Michael Day 2: 53: 4.7 PM Rev I Page .] ] of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILL WELL • DH290000 0 1 ACCESS STEP (MANUAL): Selected Feature List Year: =Horton .EMERGENCY VEHICLES Chassis: Model: fy o-WDala Proposal Total A step shall be installed at the side door. The step shall pull out by manual means only and shall fold back under the body side. REINFORCE STEPWELL WITH 0.25 " ALUMINUM PLATE FOR INSTALLATION. r►► THIS IS TO BE A ZICO MODEL #MPOS-24 ! ! INSTALL MUD FLAPS ON ALL THREE SIDE OF THE STEP TO HELP KEEP ROAD GRIME FROM HITTING STEP. DH330000 1 1 REAR DOOR HOLD OPENS, GRABBER Install chrome Cast Products "Grabber" style rear door hold opens. (NOTE: HOLD OPENS MUST BE RELOCATED IF TELESCOPIC LIGHTS ARE ORDERED) DL480000 0 1 ELECTRIC DOOR LOCKS: compartment Install power activated door locks on all exterior compartment doors. Locks to be activated by a switch at each patient area access door. Locks may be overridden by a door key. A separate lock switch will be located in the front radio console if option DL48D000 (wired to OEM locks) is not selected. DL48A000 1 1 ELECTRIC DOOR LOCKS: access doors Install power activated door locks on all patient area access doors. Locks to be activated by a switch at each patient area door, and controlled with the access door locks. Locks may be overridden by a manual slide lever or by the door key. A separate lock switch will be located in the front radio console if option DL48D000 (wired to OEM locks) is not selected. DL48B000 0 1 ELECTRIC DOOR SWITCH: concealed Install a concealed switch on the exterior of the vehicle to operate the power door lock circuit. Doors shall be wired to unlock only on this circuit. Locate: DRIVER SIDE OF CHASSIS GRILLE DL48D000 0 1 ELECTRIC DOOR LOCKS WIRED TO OEM SWITCHES The module door locks and compartment locks (if ordered) are to be wired to the chassis door lock switches. DM100000 1 1 REFLECTORS: All patient compartment entry doors shall have red reflectors in the lower corner. 11818 2015 Navistar 108" 623 Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2:53:43PM Rev 1 Page 12 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILLWELL . mHoMon MEMERGENCV VEHICLES DR22A000 0 1 MATEFLEX IN EXTERIOR COMPARTMENTS Selected Feature List Year: Chassis: Model: Proposal Total Mateflex will be installed on the floor and shelves of all exterior compartments. Col or: BLACK DR23A000 1 1 RUBBER COVERED WALLS IN BACKBOARD COMPARTMENT The interior of the backboard compartment is to be rubber matting to protect equipment stored in this Col or: GRAY Locate: CURBSIDE REAR COMPARTMENT DSP00001 0 1 SPECIAL INSTRUCTION, MODULE BODY HARDWARE covered with area. ! ! ! INSTALL LICENSE PLATE SCREWS ON THE TIP DOWN DOOR ON THE REAR RISER. INSTALL LIGHT TO THE SIDE OF DOOR. LIGHT TO BE TECHNIQ L12-WC00-1. INSTALLED ABOVE COMPARTMENT TO SHINE DOWN ON TAG. LIGHT NEEDS TO BE AS THIN AS POSSIBLE SO FLIP UP PORTION OF BUMPER DOES NOT HIT LIGHT. DSP00002 0 1 SPECIAL INSTRUCTION, MODULE BODY HARDWARE INSTALL ALUMINUM "C" CHANNEL RUB RAILS ILOS. INSTALL RED REFLECTIVE STRIPE IN CENTER PORTION OF RUB RAILS. E PAINT AND STRIPING ED02F000 0 1 PAINT CHASSIS, medium duty The chassis cab shall be painted with the following special paint color and paint code: COLOR: RED OVER SILVER NUMBER: SILVER -FLNA-91 733 RED - FLNA-3225 PAINT CHASSIS RED FROM WINDOW LINE UP. PORTION OF CHASSIS TO BE SILVER. CHASSIS TO .. SEE DRAWING. CHASSIS HOOD TO RED. LOWER ARRIVE RED 11818 2015 Navistar 108" 623 Hall -Mark Fire Monday, September 22, 2014 Print .Features Michael Day 2:53:43 P11q Rev I Page 13 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILL WELL Selected Feature List _ Year: = iEH� �r�on Chassis: Option Std Oty Header1D_escfi&ionjDa1U Pro ED050000 0 1 MODULE PAINT: other color Paint MODULE special color Model: I Total PAINT COLOR: RED OVER SILVER PAINT NUMBER: SILVER -FLNA-91733 RED - FLNA-3225 ! ! ! UPPER PORTION OF BODY TO BE RED FROM APPROXIMATLEY 2 " BELOW THE UPPER BODY LIGHTS UP. REMAINDER OF BODY TO BE SILVER. ! ! ! NOTE REAR OF VEHICLE TO BE DIAMOND GRADE MATERIAL PER BELOW. ED090000 0 1 STRIPE: custom Special paint stripe See drawing ! ! ! CUSTOM BELTLINE STRIPE THAT STARTS JUST BEHIND CHASSIS FENDERS AND INCLUDES A LARGE STEP UP ON FRONT FACE OF BODY PER DRAWING. STRIPE TO WRAP REAR CORNER POSTS AND STOP. 1" BLACK SCOTCHLITE 1" SILVER PAINT 6" RED SCOTCHLITE 1" SILVER PAINT 1" BLACK SCOTCHLITE ! ! ! INSTALL . 25 " BLACK SCOTCHLITE AT PAINT BREAK ON CAB AND BODY. ! ! DUPLICATE OF VEHICLE #15394 . ED5C0000 0 1 DIAMONDGRADE CHEVRONS -ENTIRE REAR Install Diamondgrade chevron striping on the entire rear of the body inboard of the corner posts and below the upper driprail. Colors: 6" RED #983- 72 AND FLUORESCENT YELLOW GREEN #983-23 ! ! ! ILOS THE UPPER PORTION OF THE REAR DOORS TO BE ALL RED DIAMOND GRADE AND LETTERING TO BE INSTALLED OVER THE DIAMOND GRADE MATERIAL. F INTERIOR CABINET DOORS, HANDLES & HARDWARE FE010000 1 1 FULL HEIGHT PULL HANDLES ON SLIDING PLEXIGLAS DOORS All sliding cabinet doors to have full length pull handles. FE01 FT00 1 1 LATCH, HINGED DOOR: Southco flush stainless steel pull style Install stainless flush mount Southco pull latches on the hinged interior cabinet doors. 118-18 2015 Navistar 108" 623 Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2:53:43 PM Rev 1 Page 14 of 38 TAMARAC FIRE RESCUE Selected Feature List 11818 6000 HIATUS ROAD Year: 2015 TAMARAC, FL 33321 � � _ �EHor Yton Chassis: Navistar 108" STEVE STILLWELL Model: 623 Option Std QU Header-MescitiotionQjUta Pro osal Total FE02A000 1 1 PLEXIGLAS COLOR: light tint All Plexiglas doors to be light tint. FE060000 1 1 STAINLESS STEEL COUNTER TOPS (STANDARD) Stainless steel pan formed counter tops shall be installed in the patient area. FE07A000 0 1 STAINLESS STEEL -INHALATION AREA WALLS: The rear and side walls bordering the inhalation area are to be covered with brushed stainless steel. FE08A000 0 1 STAINLESS STEEL -INHALATION PANEL: The inhalation panel is to be fabricated from stainless steel. All edges are to be filed. INTERIOR COLORS, UPHOLSTERY AND SEATING GF01 R000 0 1 INTERIOR COLOR SCHEME: Custom Interior colors are as follows: Floor: Risers: Walls: Cabinets: Upholstery: NO ACCENT STRIPE LONCOIN FLECKSTONE BLACK ONYX STAINLESS STEEL WILSONART FASHION GRAY #D381 FASHION GRAY PAINT SPRADLING ROGUE II FLINT GRAY #150UV #RU900 GF02M000 1 1 INSIDE CABINET FINISH: paint The interior of all aluminum cabinets shall have a durable paint finish. The painted surface shall be washable and non -absorbent. the appropriate Interior Color Scheme option for paint color information. Hall -Mark Fire Monday, September 22, 2014 See Print Features Michael Day 2: S3: 43PM Rev I Page 15 of 38 TAMARAC FIRE RESCUE Selected Feature List 11818 6000 HIATUS ROAD Year: 2015 TAMARAC, FL 33321 mHorton STEVE STILLWELL - EMERGENCY VEHICLES Chassis: Navistar 108" Model: 623 0 tion SO QU HMder1D_escyivtionQ1ta Pro osal Total GF02P000 1 1 RISERS: The interior of this vehicle is to contain no wood or wood products. The risers are to be made of reinforced structural composite board covered with Formica per the color description. Formica will not installed on the risers if stainless steel riser options are selected. Note: Riser thickness to be modified if option #PL27CP00 is ordered. GF030000 0 1 STAINLESS STEEL RISER, cabinet wall Install stainless steel on cabinet wall riser. If a cabinet riser accent stripe is ordered the stainless steel will stop at the bottom edge of the stripe. GF03A000 0 1 STAINLESS STEEL RISER, bench wall Install stainless steel on squad bench riser. GF03C000 0 1 STAINLESS STEEL LOWER DOOR PANELS Finish lower section of inside patient compartment doors with stainless steel. If an interior accent stripe is ordered the stainless is to stop at the bottom of the stripe. GK1213000 0 1 EVS CHILD SAFETY SEAT WITH 3-POINT SEAT BELT Delete the standard attendant seat cushion. Install a high back bucket seat with built in child seat restraints and 3-point occupant restraint. The seat to be adjustable front to rear. GK140000 1 1 SEAT BELTS: Install standard seat belt package for use with HOPS. NOTE: DO NOT INSTALL 3-PT AT HEAD OF BENCH. Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2:53:43 PM Rev I Page 16 of 38 TAMARAC FIRE RESCUE Selected Feature List 11818 6000 HIATUS ROAD TAMARAC, FL 33321 � m Year: 2015 Holton Chassis: STEEE STILLWELL _ EMERGENCY VEHICLES Chassis: Navistar 108" Mode': 623 0tloi2 ,Std Header' D 1' Pro osal Total HK000000 HKO01000 HK010000 HK01 B000 H K01 R000 1 1 LINEN CLOSET Install a vertical storage cabinet behind the attendant seat. The upper storage area shall house the primary electrical distribution area. The lower section shall be used for miscellaneous storage. Each area shall be accessed through hinged doors. The electrical distribution area shall include a Southco key lock/latching device. The entire cabinet shall be fabricated from aluminum and shall then be painted, unless otherwise specified. INSTALL A 9 " HEADER SO KNOX BOX CAN OPEN. Iff BOTTOM DOOR TO INCLUDE (2) STAINLESS STEEL VENTS. 1 1 HOPS SYSTEM: The unit is to be equipped with the HOPS system. Note: Deletion of the system along with the selection of option #HK01A000 requires that the credit provided under HK01B000 be deleted. 1 1 CABINET TRIM Install smooth radiused trim on all applicable interior cabinets. 1 1 STREETSIDE WALL WITH CPR SEAT Street side wall to have CPR configuration. SEE DRAWINGS L HK02L000 0 Configure: street side cabinets to be 18" deep. r ► � . CUSTOM CABINET WALL PER DRAWING. 2 LIFT UP CABINET FRAMES: street -side Fasten the Plexiglas door frame extrusion to a piano hinge secured to the cabinet wall. The complete frame and doors shall hinge open upward providing total access to the cabinet behind. The frame shall be held open with gas charged cylinders and secured in the down position with a sliding dead bolt. Locate: BOTH UPPER CABINETS 1 STORAGE BENEATH THE CPR SEAT A trimmed storage area shall be accessed by raising the hinged side attendant seat base cushion. r r i NOTE LIMITED STORAGE DUE TO SCBA BODY TUBES. Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2: S3: 43PM Rev I Page 17 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILLWELL 0 .. =Horton EMERGENCY VEHICLES Selected Feature List Year: Chassis: Model: Proposal Total HK03D000 0 1 PULL OUT DRAWER INSTALLATION IN MAIN CABINET WALL Pull out drawer(s) shall be installed in the main cabinet wall at the locations listed below. HK17G000 0 HSP00001 0 Location: REAR WALL RECESSED INTO STREETSIDE REAR COMPARTMENT PER DRAWING. FULL WIDTH OF CABINET. DUPLICATE 16188 1 SHARPES/WASTE STORAGE IN A TIP OUT DOOR IN MAIN CABINET WALL Install both sharps and waste containers on a tip -out door within the main cabinet wall. The door shall be specifically located as noted below. Locate: FORWARD OF THE CPR SEAT PER DRAWING. 1 SPECIAL INSTRUCTION, STREETSIDE CABINETRY ! ! ! FABRICATE AND INSTALL CABINET ABOVE THE CPR SEAT WITH HINGE UP PLEXIGLASS DOOR PER DRAWING. CABINET TO BE 40 "w X 7 "h X FULL DEPTH. THIS REQUIRES CUSTOM INSTALL DUE TO THE HEIGHT OF THIS CABINET. INTERIOR CABINETS AND SQUAD BENCH, CURB SIDE IA200000 1 1 SQUAD BENCH STORAGE: Storage shall be provided under the bench cushions. The area run where possible under the bench. The storage pan shall be fabricated from aluminum and shall be accessed by raising the cushions. IG070110 1 1 SQUAD BENCH END RESTRAINT FOR USE WITH HOPS shall split Install a restraint that is 16" above the seating surface at the head end of the bench. Standard for use in conjunction with HOPPS 3- point seat belts. DWG #105078 fit NOTE SHARPS WASTE DRAWER THAT OPENS INTO STEPWELL AT HEAD OF BENCH. r ► CUSTOM HEIGHT BOLSTER. BOLSTER TO BE 43 " HIGH ILOS . lG10A000 1 1 BENCH HOLD OPENS: gas Install gas spring hold opens on squad bench lid. Hall -Mark Fire Michael Day Monday, September 22, 2014 2: S3: 43 PM 11818 2015 Navistar 108" 623 Print Features Rev I Page .18 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILLWELL • . • mI-lomon EMERGENCY VEHICLES Selected Feature List Year: Chassis: Model: I Total IG100000 1 1 BENCH HOLD-DOWN: paddle latches (Pair) Install recessed paddle latches into the squad bench riser to retain the squad bench lids in the closed position. The latches shall be both passive and positive. IG15A000 1 1 BENCH CUSHION EDGE TRIM: Trim bench cushion edge with protective aluminum trim, to protect horizontal edge of squad bench cushion from tears.. IG15B000 1 1 BENCH BACK CUSHION: full size Delete individual squad bench back cushions. Install full size cushion. IK17E000 0 1 SHARPS/WASTE STORAGE IN A PULL OUT DRAWER IN SQUAD BENCH Install a drawer in the face of the squad bench in the specific location noted below. This drawer will house both sharps and waste containers. THIS IS TO BE A CUSTOM ASSEMBLY THAT WILL RECESS THROUGH THE CRASH RESTRAINT WALL AT THE HEAD OF THE BENCH AND EXTEND INTO THE INSIDE OF THE BENCH PAN. BUILD TO HOLD (2) 8970 CONTAINERS. INCLUDE INSERTS TO STABILIZE CONTAINERS. INSTALL RED LAMINATE COVERED ALUMINUM SLIDING DOORS FOR ACCESS TO CONTAINERS AT HEAD OF BENCH. CONTAINERS TO BE INSTALLED IN A PULL OUT DRAWER THAT OPENS INTO STEPWELL TO CHANGE CONTAINERS. IK18AA00 1 1 CURBSIDE OVERHEAD CABINET: hinged doors Storage shall be provided above the squad bench. The storage shall run the full length of the squad bench and shall be accessed through hinged Plexiglas doors that are held in the open position with gas activated rods. The entire cabinet shall be fabricated from aluminum. The cabinet is to be 911 H to meet current K requirements. IK290000 0 1 GLOVE STORAGE CABINET AT FOOT OF BENCH Fabricate a storage box on the wall over the foot of bench for storage of (3) boxes of rubber gloves. Provide oval openings in a hinged Plexiglas door for glove access. i r INSTALL RECESSED INTO COMPARTMENT JUST UNDER BENCH CABINET PER DR W I NG . ISP00002 0 1 SPECIAL INSTRUCTION, CURBSIDE CABINETRY FABRICATE A TIP OUT SHARPS JUST BELOW GLOVE STORAGE IN WALL AT FOOT OF BENCH. THIS TO TIP OUT INTO AISLE AND BE LOCATED ABOVE THE SHELF IN CS REAR COMPAR TMENT . 11818 2015 Navistar 108" 623 Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2: S3: 43 PM Rev I Page .I9 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILLWELL Selected Feature List 11818 Year: 2015 -I-lol�ton .EMERGENCY VEHICLES Chassis: Navistar 108" Model: 623 ration/Data Proposal Total INTERIOR CABINETS, FRONT JAK03000 1 1 FRONT WALL CABINET: The front wall cabinet shall be arranged per drawing. Additional configuration information may follow. Cabinet wall finish: paint ! ! ! NOTE, MAX COOL AC UNI T AND DANHARD 110V AC UNI T ON TOP OF CABINET T. INSTALL ALL COMPONENTS ASSOCIATED WITH UNITS IN BOTTOM OF CABINET. ! ! ! MODIFY INBOARD SIDE OF CABINET FOR LINES AND WIRING. JE040000 4 4 FRONT WALL DOORS: Plexiglas Front cabinet wall to have hinged Plexiglas doors, and latch type as designated. Type : Latch Style: LEXAN Southco ! ! ! DOORS TO BE LEXAN ILO PLEXI GLAS . JSP00001 0 1 SPECIAL INSTRUCTION, FRONT WALL CABINET DO NOT REMOVE PROTECTIVE COATING. ! ! ! INSTALL CUSTOMER SUPPLIED MEDVAULT KNOX BOX IN CROSSOVER CABINET LOCATION. ! ! ! KNOX BOX WILL BE FLUSH MOUNT STYLE. ! ! ! REINFORCE MOUNTING LOCATION. MODULE INTERIOR ACCESSORIES AND TRIM KG02B000 2 4 IV HANGER, CAST PRODUCTS WITH RUBBER ARM Cast products recessed IV hangers with rubber arms for attaching solution bags shall be installed in the designated locations. KG09B000 Locate: HEAD AND FOOT OF BENCH, AISLE EDGE HEAD AND FOOT OF COT, STREETSIDE 1 1 CEILING GRAB RAIL: standard (2) 2ft rails or (1) 6ft rail anti -microbial Cabinet wall "A" will have (1) 6' rail over cot as standard. Cabinet wall "B" will have (2) 2' rails, 1-forward and 1-to rear of CPR seat. Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2:53:4.7 PM Rev I Page 20 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILLWELL . — -I oMon EMERGENCY VEHICLES Selected Feature List Year: Chassis: Model: Proaosal Total KG09D000 0 1 GRAB RAIL: additional 6ft with anti -microbial coating Additional (6)ft long ceiling mounted stainless steel grab rail with anti -microbial coating. Locate: AISLE EDGE OF BENCH KGO91000 0 1 VERTICAL GRAB RAIL INSTALLATION, 2 FT. ANTI -MICROBIAL Install 2' stainless steel grab rail with anti -microbial coating. Locate: STEPWELL SIDE OF HOPS BOLSTER KG09K000 1 1 PATIENT DOOR GRAB RAILS: angled with anti -microbial coating All patient access doors to have heavy duty angled stainless steel grab rails with smooth radius corners and flange mounting and anti- microbial coating. KG110000 1 1 FLOOR TRIM Trim floor with cove molding at non rolled areas of floor. KG120000 1 1 CABINET TRIM Trim all vertical and horizontal edges. KG16B000 1 1 CEILING MATERIAL, PLATINUM WHITE ALUMINUM COMPOSITE The standard module ceiling material shall be platinum white aluminum composite. KG17A000 2 2 FIRE EXTINGUISHERS: 51b ABC Supply five pound fire ABC extinguisher(s). Ship loose, or identify mounting locat ion (s) . Locate: SHIP LOOSE L COT MOUNTS AND ACCESSORIES 11818 2015 Navistar 108" 623 Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2:53:43PM Rev I Page 21 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILLWELL LS P00001 0 MAM 148FO 1 7 maml 5y00 0 mam20a00 N'I MM01 A000 0 MM030000 1 Horton EMERGENCY VEHICLES rartfUlwav Selected Feature List Year: Chassis: Model: Total 1 SPECIAL INSTRUCTIONS, COT MOUNTS & PATIENT HANDLING ! ! REINFORCE PATIENT COMPARTMENT FLOOR FOR INSTALLATION OF S TR YKER POWER LOAD COT SYSTEM. r ! r HORTON IS TO INSTALL A CUSTOMER SUPPLIED STRYKER POWER LOAD SYSTEM. ! ! ! LOCATE FOR CENTER POSITION ONLY. LIGHTBARS FRONT AND REAR 1 FRONT LIGHTBARS FOR 96" BODIES 1 LIGHT BAR: custom front Install special front light bar. Model: WHELEN 60" FREEDOM BAR Configure: DUPLICATE OF VEHICLE #15394 1 LIGHT BAR MOUNT: cab roof Mount light bar on cab roof. Model: selected above ELECTRICAL EMERGENCY VISUAL WARNING SYSTEMS 1 WIG WAG HEADLIGHTS: Install wig wag headlight flasher. 1 WHELEN M SERIES LIGHTING OPTIONS: 11818 2015 Navistar 108" 623 Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2:53:43 PM Rev I Page 22 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILLWELL mHorton EMERGENCY VEHICLES Selected Feature List 11818 Year: Chassis: Model: Total MM10CL00 0 5 L.E.D. WARNING: compartment door 12" SINGLE COLOR (EACH) Install custom made 12" L.E.D. light strips on the interior of the exterior compartment door panels. The light strips shall have an integral lens strip for maximum light disbursement. Installation will be flush with the ALD inner panel. The light strip shall flash when the compartment door is open, and the red flashing light circuit is activated. Compartment: ALL REAR FACING COMPARTMENT DOORS, EXCEPT STREETSIDE UPPER Color: RED ! ! ! POWERED WITH BATTERY SWITCH, REGARDLESS OF WARNING MODE. MM10L000 0 4 L.E.D. WARNING: patient entry door, 12" single color (EACH) Install custom made 12" L.E.D. light strips on the interior patient entry door panels. The light strips shall have a integral lens strip for maximum light disbursement. Installation will be flush with the inner door panel. The light strip shall flash when the door is open, and the red flashing light circuit is activated. Col o r : RED Location: (1) ON EACH REAR ENTRY DOOR, UPPER PORTION (2) ON SIDE ENTRY DOOR, UPPER AND LOWER fit POWERED WITH BATTERY SWITCH, REGARDLESS OF WARNING MODE. MM120000 1 1 TECNIQ LIGHTING OPTIONS: MM26BO30 0 8 RED SUPER L.E.D. LIGHT, 900 SERIES Whelen 900 series red super L.E.D. lights shall be installed in the designated locations. Location: (2) FRONT FACE OF BODY (2) STREETSIDE (2) CURBSIDE (2) REAR FACE OF BODY, UPPER OUTBOARD CORNERS MM26RO30 0 1 AMBER SUPER L.E.D. KKK REAR LIGHT, 700 SERIES (1) AMBER series 700 super L.E.D. light to be mounted centered on rear face of modular body. MM26TI30 0 1 INTERSECTION LIGHTS, WHELEN SUPER L.E.D. 400 SERIES RED WITH FLANGE Intersection lights shall be Whelen 400 series super L.E.D. style. 2015 Navistar 108" 623 Mall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2: S3: 43 PM Rev I Page 23 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILLWELL • � i -- ni-Aomon MEMER09NCY VEHICLES Selected Feature List Year: Chassis: Model: Proposal Total MM26UI30 0 1 GRILLE LIGHTS, WHELEN SUPER L.E.D. 700 SERIES RED Grille lights will be Whelen super L.E.D. style. MM26UI30 1 1 GRILLE LIGHTS, WHELEN SUPER L.E.D. 700 SERIES RED Grille lights will be Whelen super L.E.D. style. MMSP0010 0 1 SPECIAL INSTRUCTION, VISUAL EMERGENCY WARNING SYSTEMS SUPPLY AND INSTALL A WHELEN 500 SERIES TIR 6 SUPER LED RED LIGHT WITH CLEAR LENS ON EACH SIDE OF CAB TANK COVERS BETWEEN FRONT AND REAR DOORS. ! ! ! SUPPLY AND INSTALL A WHELEN TIR6 RED LED WITH CLEAR LENS ON EACH SIDE OF THE REAR DIAMOND PLATE RISER. LIGHTS TO BE PROGRAMMED FOR BRAKE ACTIVATION IN ADDITION TO FLASHING IN EMERGENCY MODE. ! ! ! SUPPLY AND INSTALL A WHELEN 500 SERIES TIR 6 SUPER LED RED LIGHT WITH CLEAR LENS ON EACH SIDE OF BODY ABOVE REAR WHEEL WELLS. ! ! ! TOTAL OF (6) . MMSP0020 0 1 SPECIAL INSTRUCTION, VISUAL EMERGENCY WARNING SYSTEMS SUPPLY AND INSTALL A WHELEN #OSROOMCR STEADY BURN LIGHT ON THE LOWER INNER PANEL OF EACH CAB DOOR AND ACTIVATE WITH THE CAB DOOR OPEN CIRCUIT. INSTALL LIGHTS AS FAR OUTBOARD AS POSSIBLE. ! ! TOTAL OF (4) . MMSP0030 0 1 SPECIAL INSTRUCTION, VISUAL EMERGENCY WARNING SYSTEMS MN09N000 INSTALL CONSPICUITY LIGHTING DESIGN ON REAR OF MODULE. INSTALL (5) PER BODY SIDE WITH LOCATION AT AN ANGLE. TOP TO BOTTOM: R/A/R/A/R ! ! PROGRAM RED TO FLASH WITH BRAKE LIGHT CIRCUIT. PROGRAM AMBER TO FLASH WITH TURN SIGNALS. AUDIBLE EMERGENCY WARNING SYSTEMS 1 1 AIR HORN: medium duty chassis The chassis shall have air horns installed from the chassis manufacturer. The air horns shall use the chassis air system. The air horns can only be activated when the vehicle is in gear. Trumpet Locate: CHASSIS FENDERS Activation: OEM 11818 2015 Navistar 108" 623 Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2:53:43 PM Rev I Page 24 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILLWELL Selected Feature List 11818 =Horton .EMERGENCY VEHICLES int�'n» /fl�rtnr Pro Year: Chassis: Model: Total MN35EF10 0 1 SIREN, FEDERAL PA30OMSC Specified siren to be: Federal PA300MSC, 200 watt w/microphone and Hi-Lo tone. WIRE TO DRIVER SIDE SPEAKER. ! INSTALL IN CONSOLE TO DUPLICATE PREVIOUS VEHICLE. MN35EF20 0 1 SIREN, FEDERAL E02B Specified siren to be: Federal EQ2B 200 watt electronic with digital output control. !!1 WIRE TO PASSENGER SIDE SPEAKER. rr► INSTALL IN CAB CONSOLE. MN40A000 1 2 SIREN INSTALL: The siren listed above shall be supplied and mounted as defined. MN45UL00 1 1 SPEAKERS, SA3803 Install SA3803 siren speakers. MN50A000 1 1 SPEAKER INSTALL: bumper Speaker Selections (Bumper Installed) 0L09L000 0 1 KKK SIDE BODY MARKER LIGHTS, 700 SERIES L.E.D. (PAIR) Install red Whelen L.E.D. 700 series turn/marker lights on each rear side of the module body. Lights provide module body night time side lighting visibility and turning signal. indication. PROGRAM HIGH INTENSITY PORTION OF LIGHT TO FLASH WITH WARNING LIGHTS. OL34L000 1 1 LED EXTERIOR COMPARTMENT LIGHTING All exterior compartments will be lighted with LED strip lighting. A vertical strip will be installed inside both sides of each compartment. The lights shall be directed toward the back of the compartment. Note: This does not include wheelwell compartments. 2015 Navistar 108" 623 Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2:53:44 PM Rev I Page 25 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILLWELL . OL350000 0 1 ICC MARKER LIGHTS Selected Feature List 11818 Year: 2015 =I-iOt�01�1 " MEMERGE14CY VEHICLES Chassis: Navistar 108 Model: 623 ►ytiort/ ata Proposal Total LED ICC marker lights shall be installed. OL35D000 1 1 ICC MARKER LIGHTS Install standard rolled marker lights along the upper corner post front and rear. Note: Do not install if lightbar (s) already includes standard marker lights. OL41 B000 0 1 RUNNING BOARD LIGHTS, WHELEN PAR 16 L.E.D. Clear Whelen Par 16 round L.E.D. lights mounted in chrome flanges shall be installed in the front of the module body . Locate in the stainless steel stone guard above the running boards. The lights shall be wired to the chassis door switch and illuminate the step/running board. REQUIRES PRE -PUNCHED STONE GUARDS DH030000 or DH03B000. OM25AA00 0 4 SIDE SCENE LIGHTS, 900 SERIES, LED Install Whelen 900 series #9SCOENZR side scene lights. OM25DD00 0 OM3OL700 0 OSP00001 0 Locate: (2) PER SIDE, PER DRAWING 2 LOAD LIGHTS WHELEN 900 SERIES LED Rear load lights to be (2) Whelen #9SCOENZR LED lights. 1 TAIL LIGHTS, 600 SERIES L.E.D. WITH HALOGEN REVERSE (1) set of Whelen 600 series L.E.D. lights shall be installed on the rear of the vehicle as designated. They shall include L.E.D. stop/tail and turn signals. The backup lights shall be halogen. Locate: REAR RISER PER DRAWING, NOTE COMPARTMENT BELOW REAR DOORS 1 SPECIAL INSTRUCTION, ELECTRICAL r SUPPLY AND INSTALL A BLCK GO -LIGHT MODEL 2020 IN THE CENTER OF THE CAB ROOF BEHIND THE LIGHTBAR . INSTALL ON A RAISED MOUNT SO LIGHTBAR DOES NOT BLOCK. CONTROLS TO BE INSTALLED IN PASSENGER ' S SIDE OVERHEAD CUBBY ON THE LEFT SIDE. Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2:53:44 PM Rev I Page 26 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILLWELL mHorton NEMERGENCV VEHICLES Selected Feature List 11818 Option SO HeaderlDesc' t'nlOatg Pro OSP00002 0 1 SPECIAL INSTRUCTION, ELECTRICAL Year: Chassis: Model: I Total r SUPPLY AND INSTALL (3) WHELEN LED I CC LIGHTS ON HEADER PANEL OVER THE REAR DOORS. INSTALL RED LIGHT IN CENTER WIRED TO THE CHASSIS BRAKE LIGHT CIRCUIT. INSTALL AMBER ON EACH SIDE AND WIRE TO THE CHASSIS TURN SIGNAL CIRCUITS. OSP00003 0 1 SPECIAL INSTRUCTION, ELECTRICAL ! r r SUPPLY AND INSTALL (2) WHELEN LED PIONEER PLUS SCENE LIGHTS MODEL #PFP2 . INSTALL (1) CENTERED ON EACH BODY SIDE IN WHELEN PBA203 SEMIRECESSED HOUSINGS WITH CHROME FLANGES. (2) TOTAL. P ELECTRICAL POWER GROUP PAL00003 0 1 INTELLIPLEX MULTIPLEX ELECTRICAL SYSTEM: Install the Intelliplex Multiplex electrical system. PAL00006 1 1 INTELLIPLEX 14G: Install the Intelliplex i4G electrical system. PALOOA00 0 1 MODULE DISCONNECT DEFAULT The module disconnect circuit shall default to the "on" position when the battery switch is activated. PAL01 BOO 1 1 BATTERY SWITCH: std. operation The "Master" battery switch shall switch battery power "on" and "off" to the ambulance body and conversion added electrical circuits only. All OEM chassis electric's, (headlights, ignition, keep alive) shall remain wired "hot" and have no ability to be switched "off", and provide circuit function as provided by the chassis manufacturer. NOTE: DO NOT MODIFY OEM BATTERY SWITCH UNLESS STATED BELOW. ! ! ! INSTALL A SMALL ANGLED BOX BETWEEN DRIVER SEAT AND DOOR. INSTALL SWITCH IN BOX. 2015 Navistar 108" 623 Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2:53:44 PM Rev I Page 27 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILLWELL =Horton EMERGENCY VEHICLES Selected Feature List 11818 Year: Chassis: Model: Option SO Oty HeaderlDescyiLitionlOilta Pro Osal Total PAL04D00 1 1 CHARGER/POWER SUPPLY: 45 AMP Install a 45 amp battery conditioner in equipment area. Conditioner to be wired standard shoreline inlet. the designated electrical to the batteries through -the PAL31 C00 3 7 INTERIOR 12VDC OUTLETS: cigarette lighter type 12 volt outlets to use cigarette lighter style connectors. Locate: (2) INHALATION AREA PER DRAWING Locate: (2) LOWER LINEN CABINET PER DRAWING SURFACE MOUNTED Locate: (2) PASSENGER SIDE OF CAB CONSOLE PER DRAWING Locate: (1) IN FRONT WALL CABINET PER DRAWING Configure: BATTERY HOT PAL38E00 0 2 SHORELINE, KUSSMAUL SUPER AUTO EJECT, 20 AMP NON ARCING Install a 20 amp Kussmaul non -arcing auto ejection shoreline receptacle. Locate: FRONT FACE OF BODY, DRIVER SIDE TO DUPLICATE 15394. ! ! ! INSTALLED IN ANGLED HOUSING ANGLED AWAY FROM THE CAB. ! ! ! ONE TO BE DEDICATED TO DANHARD UNIT. ! ! ! COVERS TO BE RED. PAL381LO 0 2 SHORELINE INDICATOR: Install an indicator pilot light to show power to A.C. circuits and presence of activated shoreline. PAL40000 PL10A000 Locate: ABOVE THE SHORELINE INLET Configure: LED THIS TO BE WELDON GREEN LED ILOS 1 1 EXTRA 12VDC CIRCUIT BREAKER: An extra circuit breaker shall be installed. 1 1 SWITCH PANEL MOUNT: Switch panel to be flush mounted in upper face of console. !►► INSTALL IN OEM CAB DASH. PL11 A000 0 1 LIGHT PROGRAMMING: side rear scene The side rear scene lights shall be wired to transmission reverse, plus standard mode of operation. Hall -Mark Fire Monday, September 22, 2014 2015 Navistar 108" 623 Print Features Michael Day 2:53:44 PM Rev I Page 28 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILL WELL • . • •Horton EMERGENCY VEHICLES Selected Feature List Year: Chassis: Model: Proposal Total PL11 13000 0 1 LIGHT PROGRAMMING: right side scene The right side scene lights shall come "on" when the side patient door is opened. PL11 C000 0 1 LIGHT PROGRAMMING: load light The rear load lights shall be wired to transmission reverse, plus the standard mode of operation. PL11 17000 1 1 PROGRAMMING: AUDIBLE LOW VOLTAGE ALARM Program an audible alarm to activate if the voltage drops below 11.8 volts for 120 seconds. PL11 G000 1 1 LIGHT PROGRAMMING: park brake A warning shall display on the front console readout, advising to set the Parking Brake, should the modular disconnect switch be "ON" and the transmission placed in "PARK" or "NEUTRAL". It will also advise to Disengage the Parking Brake should the vehicle be placed into gear. Configure: wire alarm to activate with red flasher circuit PL190000 0 1 REPORT LIGHT: A report light shall be located at the action wall to light the counter area SUPPLY AND INSTALL A 12. 6TECNIQ LED BAR LIGHT ILOS REPORT LIGHT. ! ! ! LIGHT TO BE SWITCHED THROUGH THE REAR CONTROL PANEL. PL220000 0 1 STEP WELL LIGHT: Install one step well light in the standard location on the bench side of the step well. Light to activate with door open. r r . SUPPLY AND INSTALL A WHELEN PAR 16 LED LIGHT. PL22C000 1 1 STEP WELL LIGHT: Install a 10.5" LED Vista light strip in the standard location on the bench side of the step well. Light to activate with door open. 11818 2015 Navistar 108" 623 Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2:53:44 PM Rev I Page 29 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILL WELL Selected Feature List 11818 Year: 2015 = �EHO CY�� Chassis: Navistar 108" Model: 623 fationlData Proposal Total PL23A000 0 2 2.5" CAB CEILING LIGHTS, COMBINATION WHITE/RED LED LED lights shall be installed in the cab headliner above the driver and passenger seats. Each light contains a combination of white and red LED's which will be switched separately in the front control panel. Manufacturer #E13-WSOR-1 lights with chrom trim ring #E13-WSOO1 Locate: ONE ABOVE EACH CAB SEAT. TOTAL OF 4 EACH LIGHT TO HAVE A SEPARATE CONTROL SWITCH. PL24B000 0 3 FLUORESCENT LIGHTS: Install 24 inch 12 volt fluorescent ceiling light fixtures. Wire to charger/conditioner in addition to standard mode of operation. Locate: FRONT, CENTER AND REAR OF PATIENT CEILING ! ! ! ILOS SUPPLY AND INSTALL ROM DUROLUMEN V3 LED INTERIOR LIGHT #R03215 . PL24T000 0 1 LAMP TIMER: programmable Install an electronic momentary touch timer switch where specified. The switch will enable time limited operation of the below listed lights, with the battery switch in the off position. Locate: STEPWELL SIDE OF HOPS BOLSTER Light (s) Controlled: DUROLUMEN LIGHTS SET ELAPSED TIME FOR 15 MINUTES PL27CE00 0 7 PATIENT CEILING DOME LIGHT LENS: Concept Style Concept 3 style LED dome lights will be installed in the designated areas of the patient ceiling. Locate: PER OVERHEAD DRAWING PL280000 1 1 GOOSENECK PANEL LIGHT Install a flexible goose neck panel light in the following area. Locate: PASSENGER SIDE OF CAB CONSOLE THIS IS TO BE A FEDERAL SIGNAL LED LITTLE LIGHT. Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2:53:44 PM Rev I Page 30 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILLWELL Selected Feature List Year: i� CYI VEHICLES VEV� Chassis: Model: Option Sid ON Had r D s ri Pro osal Total PL29P000 0 3 PREWIRE FOR FUTURE STREAMLIGHT INSTALLATION Prewire shall be provided as noted below for future installation of Streamlight charger bases. Quantity: 3 Locate:- (1) STREETSIDE INTERMEDIATE, LEFT WALL CLOSE TO CENTER (1) CURBSIDE FORWARD, FRONT WALL, TOP PORTION, BACK WALL (1) CURBSIDE FORWARD, FRONT WALL, LOWER PORTION, BACK WALL PM110000 0 1 LIGHT PROGRAMMING: brake light Lower red flashing lights to operate as brake lights when not in the warning mode. Configure: flashers to override brake light feature Note: feature to activate regardless of module disconnect status PSP00001 0 1 SPECIAL INSTRUCTION, ELECTRICAL POWER, PROGRAMMING ! r ► SUPPLY AND INSTALL 12V POWER AND GROUND STUD IN THE REAR MOST PATIENT CEILING BAY. THIS IS TO BE WIRED BATTERY HOT AND WILL BE USED FOR FUTURE INSTALL OF DVD SYSTEM. PSP00002 0 1 SPECIAL INSTRUCTION, ELECTRICAL POWER,. PROGRAMMING ! ! ' SUPPLY AND INSTALL A KUSSMAUL #091-9 AUTO AIR PUMP. THIS IS TO BE TIED INTO THE CHASSIS AIR SYSTEM AND INSTALLED IN THE UPPER STREETSIDE FORWARD COMPARTMENT. HEATING, AIR CONDITIONING AND INTERIOR ENVIRONMENT OH291200 0 1 HEAT/AC SYSTEM -COMPRESSOR & CONDENSOR, NAVISTAR, FACE Install a ProAir 12V heat/AC system, complete with compressor and condenser, for the Navistar 4300. Unit is to include 3-ply replaceable carbon filters at the air intake point. This system shall not tap into the chassis OEM heat/AC system. Includes a top mounted condenser for DT466. Note: Compressor to be ordered with the chassis. (3) FAN CONDENSOR . 11818 2015 Navistar 108" 623 Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2: S3: 44 PM Rev I Page 31 of 38 TAMARAC FIRE RESCUE Selected Feature List 11818 6000 HIATUS ROAD Year: 2015 TAMARAC, FL 33321 mHoMon STEVE STILLWELL MEMERGEWCVVEMCLES Chassis: Navistar 10811 Model: 623 Option Std QU HeaderQescoyizitionMata Proposal Total OH29MX00 0 1 MAX COOL II DUAL A/C UNIT Install a dual 12V air conditioning system as noted below. The second A/C unit shall be a ProAir 938. This system shall include a second evaporator and a 3-fan condenser and shall be run off of the auxiliary A/C compressor. This system shall include a separate 'High/Low' function at the second unit. This second unit shall operate as A/C only. An accumulator is required for this installation. Locate: FRONT WALL CABINET PER DRAWING OH29N000 0 1 PAINT AUXILIARY CONDENSER, FRONT FACE, TO MATCH BODY: Paint the auxiliary condensor mounted on the front face of the body to match the body color. Standard color is white. OH310000 0 4 3-PLY PANEL INTAKE FILTER Install a 3-Ply Panel air intake filter ILOS. (1) 16.75" x 8.75" #10008973 for attendant seat base or above right front cabinet. (2) 13" x 18" #10009296 over #1 compartment or in bottom of linen cabinet. Filters will be behind stainless steel intake grills. ! ! ! INSTALL ON ALL AC UNITS. OL43C000 0 1 PERKO POWER VENT Install a Perko power vent. Use existing ceiling plate and vent to outside of modular body. OL43D000 0 1 PERKO STATIC VENT Install a Perko static vent. Use existing ceiling plate and vent to outside of modular body. QL455000 0 1 DANHARD 110V A/C SYSTEM Install a Danhard 50-2000 110V heat/AC unit as noted below. Locate: FRONT WALL CABINET PER DRAWING Thermostat location: INHALATION AREA CAB CONSOLE AND COMMUNICATIONS Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2:53:44 PM Rev I Page 32 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILL WELL RJ01A000 RJ01 B000 RJOI C000 1 1 ANTENNA COAX 1: Selected Feature List 11818 Year: 2015 _ •EHO ! VVI I Chassis: Navistar 108" CY Model: 623 Glitionffiata Proposal Total An RG 58U coax shall be installed so that the ambulance conversion need not be disassembled. Exterior Termination: CAB ROOF Interior Termination: LOWER LINEN CABINET 0 1 ANTENNA COAX 2: Install additional antenna coax and accesses. Exterior Termination: Interior Termination: 0 1 ANTENNA COAX 3: CAB ROOF LOWER LINEN CABINET Install additional antenna coax and accesses. Exterior Termination: CAB ROOF Interior Termination: LOWER LINEN CABINET RJ03MN00 0 3 ANTENNA: NMO type mount. Supply and install NMO type antenna base as designated.. This option is less the antenna coax. An antenna coax option must be selected to be installed. Coax Number: ALL RJ040000 1 1 RADIO CABLE PULL WIRE A standard pull wire for behind the driver's seat run in a 3" conduit. RJ05B000 1 1 FRONT CONSOLE: radio installation shall be installed from to behind the inhalation panel. Wire is to A console shall be fabricated to coordinate with the interior cab color. Room shall be provided on the face of the console for installation of radio and siren controls. !!! REINFORCE PASSENGER SIDE OF CAB CONSOLE FOR FUTURE INSTALLATION OF LAP TOP . Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2:53:44PM Rev I Page 33 of 38 TAMARAC FIRE RESCUE Selected Feature List 6000 HIATUS ROAD TAMARAC, FL 33321 Year' Horton STEVE STILL WELL MEMEpGENCY VEHICLES Chassis: Model: ion SO QU Header/Descrintian/data Proposal Total RJ05C000 RJ06A000 RJ06B000 RJ070000 RJ08A000 N X F C 1 CONSOLE EXTENSION: A box for mounting radio heads and storage maps, books, or binders will be attached to the standard engine cover console. Standard box includes (3) 2.5 storage sections, and 8.5 faceplate for radio mounting. ! ! INSTALL (2) CUP HOLDERS ! ! CUSTOM CONSOLE WITH TW fi r INS TALL 3. 5 " X 4 " HOLE PASSENGER SIDE OF CONSOLE. FORWARD MAP SLOT. 1 RADIO HEAD PRE-CUT: front O IN THE REAR PORTION OF THE CAB CONSOLE. EXTENSIONS PER DRAWINGS. WITH STANDARD VENT ON DRIVER AND LOCATE ON EITHER SIDE OF LARGE Cut out control console for radio head(s). Model #: 1 RADIO HEAD PRE-CUT: rear Cut out rear action panel for radio head(s). Model # : 3 RADIO CABLE INSTALL: customer supplied Customer supplied radio cables will be installed during the vehicle construction. Cables to be tagged and marked at each end to identify their installed location. All cables shipped to Horton must have the vehicle production number clearly marked on the shipping package, and delivered prior to or at time of modular pre -wire. Locate: (2) LOWER LINEN (1) LOWER LINEN 3 RADIO POWER/GROUND: TO INHALATION TO CONSOLE Install three 6 gauge cables to positive and ground studs for radio power. Wire one constant hot, one ignition hot and one ground. Locate: Configure: INHALATION AREA, CAB CONSOLE, LOWER LINEN battery switched, battery hot and ground 11818 2015 Navistar 108" 623 Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2:53:44 PM Rev I Page 34 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILLWELL • , • mHorton EMERGENCY VEHICLES Selected Feature List Year: Chassis: Model: Proposal Total RSP00001 0 1 SPECIAL INSTRUCTION, CAB CONSOLE & COMMUNICATIONS T TN020000 TN030000 TN03A000 TN04A000 C Ic r ! ! ! HORTON TO SUPPLY AND INSTALL A 6 POSITION WIRELESS FIRECOM SYSTEM PER BELOW AND TO DUPLICATE PREVIOUS VEHICLE. 1 106-1310-10 301OR INTERCOM SINGLE RADIO 1 MR52X CABLE 3 UHW-51 WIRELESS HEADSET UNDER HELMET RADIO TRANSMIT US/CAN 3 106-3089-00 WIRELESS BASE, SINGLE CHANNEL 2 UHW-54 WIRELESS HEADSET UNDER HELMET ON/OFF INTERCOM US/CAN 1 106-3086-00 WIRELESS BASE, 5-CHANNEL 5 520-0676-00 HANGER HOOK FOR HEADSET ROHS - BLACK DRIVER AND PASSENGER CAB ROOF REAR CREW AREA, CENTERED OVERHEAD 2 ACTION AREA HEAD OF BENCH WALL EACH LOCATION SHALL HAVE POWER FOR CHARGING OXYGEN AND SUCTION 1 OXYGEN ACCESS: OF THE HEADSET. A clear Plexiglas door shall be provided in the patient area wall for access to the oxygen cylinder valve. The door shall be hinged so that,it swings into the oxygen cylinder storage compartment. The opening shall be trimmed with anodized aluminum edging. O.D. dimension of the access is 7" wide x 1111 high. ! ! DOOR TO OPEN INTO PATIENT AREA AND INCLUDE SOUTHCO LATCH. 2 OXYGEN OUTLETS, STANDARD Two oxygen outlets shall be provided located in the inhalation panel. 2 OXYGEN OUTLET: additional Install additional oxygen outlet(s). Locate: CEILING OVER HEAD OF COT WALL AT HEAD OF BENCH 1 ADAPTER TYPE: Ohio Diamond II Oxygen outlets to be Ohio Diamond II. as standard and shall be 11818 2015 Navistar 108" 623 Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2:53:44 PM Rev I Page 35 of 38 TAMARAC FIRE RESCUE Selected Feature List 11818 6000 HIATUS ROAD Year: 2015 TAMARAC, FL 33321 mHOI' on STEVE STILL WELL .EMERGENCY VEHICLES Chassis: Navistar 108" Model: 623 (o tion Std HearD Proosal Total TN050000 1 1 FLOWMETER: Supply dial type flowmeter. TN060000 1 1 OXYGEN WRENCH: Install oxygen wrench in oxygen compartment. Mount secure so not left hanging. Mount with length of chain or cable so not removable. TN100000 1 1 VACUUM OUTLET: inhalation wall A single vacuum panel shall be installed in the inhalation area. The outlet shall be of the same style as the oxygen system and hooked to the onboard vacuum pump. TN11 B000 1 1 ASPIRATOR: SSCOR Install an SSCOR aspirator. The system shall include a #107CDC20 pump, #22000 wall mounted regulator, and a #23002 canister holder. U LETTERING UP010000 0 1 LETTERING: Lettering to be included. RED SCOTCHLI TE WITH BLACK SCOTCHLI TE BORDER ON BODY SIDES WHITE SCOTCHLI TE WITH BLACK SCOTCHLI TE BORDER ON REAR ABOVE REAR DOORS INSTALLED OVER RED DIAMOND GRADE MATERIAL. ! ! ! DUPLICATE OF PREVIOUS VEHICLE. UP01 CD00 0 1 LETTERING REQUIRED ON CAB DOORS Lettering shall be installed on the cab doors. This lettering shall meet the requirements listed below. ! ! ! INSTALL CUSTOMERS SUPPLIED LOGOS ON CAB DOORS. UP01 CS00 0 1 LETTERING REQUIRED ON CURBSIDE OF BODY Lettering shall be installed on the curbside of the body. This lettering shall meet the requirements listed below. Configure: 'TAMARAC ' S I ZED TO FIT 'FIRE RESCUE' CUT OUT OF THE RED SCOTCHLITE BELTLINE STRIPE Mall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2:53:44 PM Rev I Page 36 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILLWELL =Horton .EMERGENCY VEHICLES Selected Feature List Year: Chassis: Model: Proposal Total UP01 R000 0 1 LETTERING REQUIRED ON REAR OF VEHICLE Lettering shall be installed on the rear of the vehicle. This lettering shall meet the requirements listed below. Configure: ' TAMARAC ' 'FIRE RESCUE' UP01 SS00 0 1 LETTERING REQUIRED ON STREET SIDE OF BODY Lettering shall be installed on the street side of the body. This lettering shall meet the requirements listed below. U P03 C000 U P08 B000 UP180000 USP00001 Y00 Z02 Configure: ' TAMARAC ' SIZED TO FIT 'FIRE RESCUE' CUT OUT OF THE RED SCOTCHLI TE BELTLINE STRIPE 0 60 6" SHADED SCOTCHLITE LETTERING 0 2 STAR OF LIFE 12: (each) Install 12" star of life. Locate: ON REAR WINDOWS TO BE 'ETCHED STYLE' ILOS. 1 1 DOOR REFLECTORS Install 2" x 12" strips of red Scotchlite at the top of each entry door placed horizontally. 0 1 SPECIAL INSTRUCTION, LETTERING ! ! INSTALL 3" UNIT NUMBERS, SAME FONT AND COLOR AS REST OF LETTERING. LOCATE (1) EACH SIDE OF CHASSIS FENDER, (1) REAR FACE OF BODY, EACH SIDE. UNIT # 367-368 0 1 PRICE ADJUSTMENT: discount Price discount, and or consideration. Multiple Vehicle: $-1500 0 1 Factory Pickup and Transportation Allowance for vehicle pickup, F.O.B. TAMARAC, FL transportation and drivers fee. 11818 2015 Navistar 108" 623 Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2:53:44 PM Rev I Page 37 of 38 TAMARAC FIRE RESCUE 6000 HIATUS ROAD TAMARAC, FL 33321 STEVE STILL WELL Selected Feature List 11818 _ Year: 2015 EMERGENCY�n Chassis: Navistar 108" Model: 623 iptionfData Proposal Total Z03 0 1 Dealer Prep. and Dealer Delivery Allowance for vehicle preparation and delivery. Z04 0 1 Fuel, Tags, Etc. Allowance for fuel, tags and administrative. UNIT TO BE DELIVERED WITH FLORIDA TAGS. Z06 0 1 STATE CONTRACT: This vehicle is subject to state contract pricing. FLORIDA SHERIFFS ASSOCIATION CONTRACT #11-10-1202 1 /2 o FEE Total Configured Cost Authorized Department Signature(s): $277,912.00 Hall -Mark Fire Monday, September 22, 2014 Print Features Michael Day 2: S3: 44 PM Rev I Page 38 of 38 w X X W v C,,, M Xc yr =O XC v4 a m cn 1 �T V 1 x0 N � X> -L:[) w vn cn r m z m m v 0 -0 C r TR 12558- Exhibit Al w in o V o� n g D rn 0 0 m 'n r. 0 C r m q 0 U) O 0 X ni -v r 0 m w it 0 0 D CD rW V CX 0 N 0 -n = Xx Dw Kv m X V .1L X o o v cn a z m m Cl) m m r a m r.- r- n --� X X Z Z C a -n X j Dv m m o J ow L j X= D mE � *:1 m x w v0 X� OD 0 v� m TR 12430- Exhibit Al z G) m m Z 1= 9 1\ OLIMMEli m 9 m 0 ss mm "o F. mto im IAlia 0 2 m Z CD W M —0 om OX �m =O n� U) U m m TR 12430- Exhibit Al � o v a a rn n rn � O c co a m 0 U) m N (n O 0 01IIIIIN�Ii � rn IIIOa�I! c 0 w O o 0 { O�IInIOb�ll z O co � a I 0 m IlIIUII Z — ° — — — — — — — — — rn a 0 Z N Z v rn > W T n Ul C m e o ® —I (n z DTI o �o rn nz v D — — cn > n U) N r M CD Cn Ln \\X rn 0 N N O O o c� o rZ � nZ OX OcD -CIO 0r O D,cNC r0O rn Z � -I f Z MX Z co CA) �X Oco m v Mic a m m a Dz� F o D m m D \ II Z \ D Z II X �� \ z --i TR 12430- Exhibit Al 7n m 0 z N r � o rn z -v rn I r N D W N � < o < >0 I I � m �4 � s m 0 c m r - Z � r (%� m cn Cl)C/) C.)_ 0 0©000 0, -- I cn m CUT rn O 0 o I r z WMIN r c rFlo G� IF®R CW c 1 j 0 c0 s $ 4 ca ��n v J N � m m 7 0 0 0 O O O !7L!ll TR 12430- Exhibit Al o m r 0o v� z z n x z U X Flo �o m X r0 -G -L r T w 0 nc 00 X 2 z 0 >11 o,giI l — � a zmall 8 C: 0 mill 0 0 s e r O � O O m : :X)t z _ D >w rn X ® IV cl) co o D D rn M m n = c o U) oo _ rn Z O OC/) r = V5C) r Z rn 0 0 a C 0 1 m ...�1 m a � � J v a w m w 1 1 TR 12430- Exhibit Al < no v a m Zi m z as -n mw rn fcn a 0 z a X m I o NOW. I II�IIIIIIIIIII m rn �-- — — — — IIINIIIIIII o 0 z r-a mm m r 0 as r r I ° 00 (� \o >o az I ( m0 o� I 0(D U) to I m -o z , =o I m 0 I L FN °D D I w L — 7=r Ei rncn i _ _ ®X Z a� III N rn o �o I� <w a Z o .' o U) -0 C7 m rn 00 II w I Lm Cl) I I X �D v �I 1 0 m Ilm I =m II r x ill I I o D C/) m II U) r f — r II X 'II �IIL —JI -IL FEFE i� I--- 0 CA) N O D C V O� � { N CJ m� m � v =► D rip 16 Q I �vl Q. � ..L��� I I w r"QI I� �cn I EXHIBIT B - TR 12558 INTERNAT ONAV September 15, 2014 Prepared For: Presented By: HALL -MARK_ FIRE APPARATUS; TAMARAC FIRE MAUDLIN INTL. TRUCKS, 1 -9/15 Sally Wilson MICHAEL DAY 5221 WEST HIGHWAY 40 3431 NW 27TH AVE OCALA FL 34482 - OCALA, FL 34475- (352)732-8151 (352)629 - 6305 Reference ID: 4300 LP - 4DR Model Profile 2015 4300 SBA LP 4X2 (MH025) APPLICATION: Rescue MISSION: Requested GVWR: 25999. Calc. GVWR: 25999 Calc. Start / Grade Ability: 35.28% / 2.03% @ 55 MPH Galc. Geared Speed: 85.0 MPH' FUEL ECONOMY: 8.92 MPG @ 55 MPH DIMENSION: Wheelbase: 236.00, CA: 125.00, Axle to Frame: 96.00 ENGINE, DIESEL: {MaxxForce DT) EPA 10, 260 HP @ 2200'RPM, 660 lb-ft Torque @ 1300 RPM, 2400 RPM Governed Speed, 260 'Peak HP_ (Max) TRANSMISSION, AUTOMATIC: {Allison 3000EVS_P} 5th Generation Controls; Close Ratio, 6-Speed; With Double Overdrive, Includes Oil Level Sensor, With Provision for PTO, Less Retarder, With 80,000-lb GVW & GCW Max. CLUTCH: Omit Item(Clutch &' Control) AXLE, FRONT NON -DRIVING: {Meritor MFS-10-143A) Wide Track,' I -Beam' Type, 10,000-lb Capacity AXLE, REAR, SINGLE: (Dana Spicer 17060S) Single Reduction, 17,500-lb Capacity, 190 Wheel Ends Gear Ratio: 4.88 CAB: Conventional 6-Man -Crew Cab - TIRE, FRONT: (2) 265/75R22.5 G661 HSA (GOODYEAR) 539 rev/mile, load range G, 14 ply TIRE, REAR: (4) 265/75R22.5 G622 RSD (GOODYEAR) 534 rev/mile, load range G, 14 ply SUSPENSION, REAR, AIR, SINGLE: {International) Ride Optimized Suspension ('IROS); 18,500-lb Capacity, 5.3" Ride Height, With Shock Absorbers PAINT: Cab schematic 100GA Location 1: 2562, Red (Preen) Chassis schematic NIA 1 Proposal: 11713-01 INTERNATIQNAV Vehicle Specifications September 15, 2014 2015 4300 SBA LP 4X2 (MH026) Code Description FIR Wt Tot Wt (Ibs) (Ibs) MH02500 Base Chassis, Model 4300 SBA LP 4X2 with 236.00 Wheelbase, 125.00 CA, and 6399/2491 8890 96.00 Axle to Frame. 1570 TOW HOOK, FRONT (2) Frame Mounted 8/0 8 1 CAA FRAME RAILS High Strength Low Alloy Steel (80,000 PSI Yield); 9.125" x 3.062" 71/373 444 x 0.312" (231.8mm x 77.8mm x 8.Omm) With Transition to 6.500" x 3.062" x 0.312" (165.1 mm x 77.8mm x 8.Omm) 388.4" (9864mm) Maximum OAL; For LP Chassis Notes 6.50" Web Height in AF Section 1 LEG LICENSE PLATE HOLDER Includes Upper & Lower Mounting Plate Hardware, 3/0 3 Mounted in Existing Holes in Front Bumper 1 LNN BUMPER, FRONT Full Width, Aerodynamic, Chrome Plated Steel; 0.142" Material 0/0 0 Thickness 1 SAL CROSSMEMBER, REAR, AF (01) 0/20 20 1 WEJ WHEELBASE RANGE 199" (505cm) Through and Including 254" (645cm) 0/0 0 2ARX AXLE, FRONT NON -DRIVING {Meritor MFS-10-143A) Wide Track, I -Beam Type, 41/0 41 10, 000-lb Capacity Notes : The following features should be considered when calculating Front GAWR: Front Axles; Front Suspension; Brake System; Brakes, Front Air Cam; Wheels; Tires. 3ADB SUSPENSION, FRONT, SPRING Parabolic, Taper Leaf; 10,000-lb Capacity; With 65/0 65 Shock Absorbers Includes : SPRING PINS Rubber Bushings, Maintenance -Free Notes : The following features should be considered when calculating Front GAWR: Front Axles; Front Suspension; Brake System; Brakes, Front Air Cam; Wheels; Tires. 4091 BRAKE SYSTEM, AIR Dual System for Straight Truck Applications 104/26 130 Includes : BRAKE LINES Color and Size Coded Nylon : DRAIN VALVE Twist -Type : GAUGE, AIR PRESSURE (2) Air 1 and Air 2 Gauges; Located in Instrument Cluster : PARKING BRAKE CONTROL Yellow Knob, Located on Instrument Panel : PARKING BRAKE VALVE For Truck : QUICK RELEASE VALVE Bendix On Rear Axle for Spring Brake Release: 1 for 4x2, 2 for 6x4 : SLACK ADJUSTERS, FRONT Automatic : SLACK ADJUSTERS, REAR Automatic : SPRING BRAKE MODULATOR VALVE R-7 for 4x2, SR-7 with relay valve for 6x4 Notes : Front and Rear Dust Shields not Included 4AZA AIR BRAKE ABS {Bendix AntiLock Brake System) Full Vehicle Wheel Control 9/21 30 System (4-Channel) 4EBT AIR DRYER {Bendix AD-IP) With Heater 0/0 0 2 Proposal:11713-01 INTERNATIONAV Vehicle Specifications September 15, 2014 2015 4300 SBA LP 4X2 (MH026) Code Description FIR Wt Tot Wt (Ibs) (Ibs) Includes : AIR DRYER LOCATION Inside Left Rail, Back of Cab 4ESX BRAKE CHAMBERS, FRONT AXLE {Haldex) 20 Sgln 0/0 0 4EVL BRAKE CHAMBERS, REAR AXLE {Haldex GC3030LHDH0) 30/30 Spring Brake 0/6 6 Includes BRAKE CHAMBERS, SPRING (2) Rear Parking; WITH TRUCK BRAKES: All 4x2, 4x4; WITH TRACTOR BRAKES: All 4x2, 4x4; 6x4 & 6x6 with Rear Tandem Axles Less Than 46,000-lb. or GVWR Less Than 54,000-lb. 4JCG BRAKES, FRONT, AIR CAM S-Cam; 15.0" x 4.0"; Includes 20 Sq. In. Long Stroke 83/0 83 Brake Chambers Notes : Front Axle with 14,000-lb GAWR is Limited to 13,200-lb GAWR when used in Conjunction with 15" BRAKES, FRONT, AIR CAM. : The following features should be considered when calculating Front GAWR: Front Axles; Front Suspension; Brake System; Brakes, Front Air Cam; Wheels; Tires. 4NDB BRAKES, REAR, AIR CAM S-Cam; 16.5" x 7.0"; Includes 30/30 Sq.In. Long Stroke 0/211 211 Brake Chamber and Spring Actuated Parking Brake Notes : The following features should be considered when calculating Front GAWR: Front Axles; Front Suspension; Brake System; Brakes, Front Air Cam; Wheels; Tires. 4SBC AIR COMPRESSOR (Bendix Tu-Flo 550) 13.2 CFM Capacity 60/-1 59 5710 STEERING COLUMN Tilting and Telescoping 10/0 10 5CAL STEERING WHEEL 2-Spoke, 18" Diam., Black 0/0 0 5PSM STEERING GEAR (Sheppard HD94) Power 26/1 27 713HU EXHAUST SYSTEM Single, Horizontal, Aftertreatment Device Frame Mounted 52/67 119 Right Side Back of Cab; Includes Vertical Tail Pipe & Guard Includes : EXHAUST HEIGHT 10' Exhaust Height - Based on Empty Chassis with Standard Components (+ or -1" Height) : MUFFLER/TAIL PIPE GUARD Non -Bright Finish 7SCZ ENGINE EXHAUST BRAKE for MaxxForce 16 Engines, Electronically Activated 0/0 0 7WBA TAIL PIPE (1) Turnback Type, Bright, for Single Exhaust 0/0 0 7WBS MUFFLER/TAIL PIPE GUARD (1) Bright Stainless Steel 0/0 0 7WZX SWITCH, FOR EXHAUST 3 Position, Momentary, Lighted Momentary, ON/ 2/0 2 CANCEL, Center Stable, INHIBIT REGEN, Mounted in IP Inhibits Diesel Particulate Filter Regeneration When Switch is Moved to ON While Engine is Running, Resets When Ignition is Turned OFF 8000 ELECTRICAL SYSTEM 12-Volt, Standard Equipment 0/0 0 Includes : BATTERY BOX Steel : DATA LINK CONNECTOR For Vehicle Programming and Diagnostics In Cab : FUSES, ELECTRICAL SAE Blade -Type : HAZARD SWITCH Push On/Push Off; Located on Top of Steering Column Cover : HEADLIGHT DIMMER SWITCH Integral with Turn Signal Lever : JUMP START STUD Located on Positive Terminal of Outermost Battery 3 Proposal: 11713-01 INTERNATIONAV Vehicle Specifications September 15, 2014 2015 4300 SBA LP 4X2 (MH026) Code Description FIR Wt Tot Wt (Ibs) (Ibs) : PARKING LIGHT Integral with Front Turn Signal and Rear Tail Light : STARTER SWITCH Electric, Key Operated : STOP, TURN, TAIL & B/U LIGHTS Dual, Rear, Combination with Reflector : TURN SIGNAL SWITCH Self -Cancelling for Trucks, Manual Cancelling for Tractors, with Lane Change Feature : TURN SIGNALS, FRONT Includes Reflectors and Auxiliary Side Turn Signals, Solid State Flashers; Flush Mounted : WINDSHIELD WIPER SWITCH 2-Speed with Wash and Intermittent Feature (5 Pre -Set Delays), Integral with Turn Signal Lever : WINDSHIELD WIPERS Single Motor, Electric, Cowl Mounted : WIRING, CHASSIS Color Coded and Continuously Numbered 8518 CIGAR LIGHTER Includes Ash Cup 1/0 1 8541 HORN, ELECTRIC (2) Disc Style 1/0 1 8718 POWER SOURCE Cigar Type Receptacle without Plug and Cord 1/0 1 8GWY ALTERNATOR {Leece-Neville 14931 PAH} Brush Type, 12 Volt 320 Amp. 13/0 13 Capacity, Pad Mount 8HAB BODY BUILDER WIRING Back of Standard Cab at Left Frame or Under Extended 2/0 2 or Crew Cab at Left Frame; Includes Sealed Connectors for Tail/Amber Turn/ Marker/ Backup/Accessory Power/Ground and Sealed Connector for Stop/Turn 8MKX BATTERY SYSTEM {International} Maintenance -Free (3) 12-Volt 2775CCA Total 48/10 58 8RME RADIO AM/FMNVB/Clock/3MM Auxiliary Input, with Multiple Speakers, With CD 1/0 1 Player 8THB BACK-UP ALARM Electric, 102 dBA 0/3 3 8WBW JUMP START STUD Remote Mounted 2/0 2 Includes : JUMP START STUD Mounted to Battery Box 8WCS BATTERY DISCONNECT SWITCH (Joseph Pollak 51-315) Positive Type, Lever 1/0 1 Operated, Cab Mounted 8WGL WINDSHIELD WIPER SPD CONTROL Force Wipers to Slowest Intermittent Speed 0/0 0 When Park Brake Set and Wipers Left on for a Predetermined Time 8WHE HORN, AIR ACCOMMODATION PACKAGE; less Horn 2/0 2 8WMA SWITCH, TOGGLE, FOR WORK LIGHT Lighted; on Instrument Panel and Wiring 2/1 3 Effects for Customer Furnished Back of Cab Light 8WPH CLEARANCE/MARKER LIGHTS (5) {Truck Lite) Amber LED Lights, Flush 0/0 0 Mounted on Cab or Sunshade 8WPZ TEST EXTERIOR LIGHTS Pre -Trip Inspection will Cycle all Exterior Lamps Except 0/0 0 Back-up Lights 8WRB HEADLIGHTS ON W/WIPERS Headlights Will Automatically Turn on if Windshield 0/0 0 Wipers are turned on 8WTL STARTING MOTOR (Delco Remy 39MT) 12 Volt; Gear Reduced, With Thermal 0/0 0 Over -Crank Protection 8VVWJ INDICATOR, LOW COOLANT LEVEL With Audible Alarm 0/0 0 8WRB HEADLIGHT WARNING BUZZER Sounds When Head Light Switch is on and 0/0 0 Ignition Switch is in "Off' Position 4 Proposal: 11713-01 I NTE RNAT QNAV Vehicle Specifications 2016 4300 SBA LP 4X2 (MIH026) Code Description 8WZK HEADLIGHTS Halogen; Composite Aero Design for Two Light System 8XAH CIRCUIT BREAKERS Manual -Reset (Main Panel) SAE Type III With Trip Indicators, Replaces All Fuses Except For 5-Amp Fuses 9HBM GRILLE Stationary, Chrome 9WAY FRONT END Tilting, Fiberglass, With Three Piece Construction 10060 PAINT SCHEMATIC, PT-1 Single Color, Design 100 Includes : PAINT SCHEMATIC ID LETTERS "GA" 10761 PAINT TYPE Base Coat/Clear Coat, 1-2 Tone 10769 PAINT CLASS Premium Color 10WGD SPECIAL RATING, GVWR Limited to 25,999-lb GVWR 11001 CLUTCH Omit Item (Clutch & Control) 12NUP ENGINE, DIESEL {MaxxForce DT) EPA 10, 260 HP @ 2200 RPM, 660 lb-ft Torque @ 1300 RPM, 2400 RPM Governed Speed, 260 Peak HP (Max) Includes : AIR COMPRESSOR AIR SUPPLY LINE Naturally -Aspirated (Air Brake Chassis Only) : ANTI -FREEZE Red Shell Rotella Extended Life Coolant; -40 Degrees F/ -40 Degrees C; for MaxxForce and Navistar Engines : COLD STARTING EQUIPMENT Intake Manifold Electric Grid Heater with Engine ECM Control : CRUISE CONTROL Electronic; Controls Integral to Steering Wheel : ENGINE OIL DRAIN PLUG Magnetic : ENGINE SHUTDOWN Electric, Key Operated : FUEL FILTER Included with Fuel/Water Separator : FUEL/WATER SEPARATOR Fuel/Water Separator and Fuel Filter in a Single Assembly; With Water -in -Fuel Sensor; Engine Mounted : GOVERNOR Electronic : OIL FILTER, ENGINE Spin -On Type : WET TYPE CYLINDER SLEEVES Notes : Recommend Code 12THT when using front mount obstructions (winches, cones, reels, etc.) that restrict air flow through the radiator. 12THT FAN DRIVE {Horton Drivemaster} Direct Drive Type, Two Speed With Residual Torque Device for Disengaged Fan Speed Includes : FAN Nylon Notes : Recommend Code 12THT when using front mount obstructions (winches, cones, reels, etc.) that restrict air flow through the radiator. 12UBK RADIATOR Aluminum; 2-Row, Cross Flow, Over Under System, 1045 Sqln Louvered, With 302 Sqln CAC, With 369 Sqln LTR, Includes In -Tank Transmission Oil Cooler Includes : DEAERATION SYSTEM with Surge Tank September 15, 2014 FIR Wt Tot Wt (Ibs) (Ibs) 0/0 0 0/0 0 0/0 0 0/0 0 0/0 0 Ali ll 0/0 0 0/0 0 -67/-8 -75 53/1 54 25/0 25 62/-4 58 Proposal: 11713-01 1 NTE RNAT QNAV Vehicle Specifications September 15, 2014 2016 4300 SBA LP 4X2 (MH025) Code Description FIR Wt Tot Wt (Ibs) (Ibs) HOSE CLAMPS, RADIATOR HOSES Gates Shrink Band Type; Thermoplastic Coolant Hose Clamps : RADIATOR HOSES Premium, Rubber 12UNK FEDERAL EMISSIONS EPA, OBD and GHG Certified for Calendar Year 2014; 0/0 0 MaxxForce DT Engines 12VBR AIR CLEANER With Service Protection Element 0/0 0 Includes : GAUGE, AIR CLEANER RESTRICTION Air Cleaner Mounted 12VXT THROTTLE, HAND CONTROL Engine Speed Control; Electronic, Stationary, 0/0 0 Variable Speed; Mounted on Steering Wheel 12VZA ENGINE CONTROL, REMOTE MOUNTED Provision for; Includes Wiring for Body 0/0 0 Builder Installation of PTO Controls; With Ignition Switch Control for MaxxForce and Navistar post 2007 Emissions Electronic Engines 12WTA FAN DRIVE SPECIAL EFFECTS Fan Cooling Ring with Fan Shroud Effects, 14/-1 13 Engine Mounted 12WZE EMISSION COMPLIANCE Federal, Does Not Comply With California Clean Air Idle 0/0 0 Regulations 13AUK TRANSMISSION, AUTOMATIC {Allison 3000EVS_P} 5th Generation Controls; 254/34 288 Close Ratio, 6-Speed; With Double Overdrive, Includes Oil Level Sensor, With Provision for PTO, Less Retarder, With 80,000-lb GVW & GCW Max. 13WBL TRANSMISSION SHIFT CONTROL {Allison} Push -Button Type; for Allison 3000 0/0 0 & 4000 Series Transmission 13WLP TRANSMISSION OIL Synthetic; 29 thru 42 Pints 0/0 0 13WUT ALLISON SPARE INPUT/OUTPUT for Emergency Vehicle Series (EVS); Without 0/0 0 Split Shaft PTO 13WYU SHIFT CONTROL PARAMETERS Allison 3000 or4000 Series Transmissions, 5th 0/0 0 Generation Controls, Performance Programming 14899 SUSPENSION AIR CONTROL VALVE Pressure Release Control In Cab 6/2 8 14AGE AXLE, REAR, SINGLE {Dana Spicer 17060S} Single Reduction, 17,500-lb 0/11 11 Capacity, 190 Wheel Ends. Gear Ratio: 4.88 Includes : REAR AXLE DRAIN PLUG (1) Magnetic, For Single Rear Axle Notes : The following features should be considered when calculating Rear GAWK: Rear Axles; Rear Suspension; Brake System; Brakes, Rear Air Cam; Brake Shoes, Rear; Special Rating, GAWR; Wheels; Tires. : When Specifying Axle Ratio, Check Performance Guidelines and TCAPE for Startability and Performance 14TBN SUSPENSION, REAR, AIR, SINGLE {International} Ride Optimized Suspension 0/-10 -10 (IROS); 18,500-lb Capacity, 5.3" Ride Height, With Shock Absorbers Notes : The following features should be considered when calculating Front GAWR: Front Axles; Front Suspension; Brake System; Brakes, Front Air Cam; Wheels; Tires. 14WMN AXLE, REAR, LUBE {EmGard FE-75W-90} Synthetic Oil; 1 thru 29.99 Pints 0/0 0 6 Proposal: 11713-01 iNTERNAT ONAV Vehicle Specifications September 16, 2014 2015 4300 SBA LP 4X2 (MH025) Code Description FIR Wt Tot Wt (Ibs) (Ibs) 15SGG FUEL TANK Top Draw; D Style, Non Polished Aluminum, 19" Deep, 70 U.S. Gal., 13/2 15 265 L Capacity, with Quick Connect Outlet, Mounted Left Side, Under Cab Notes : N/A with 19.5" Tires .16196 CAB Conventional 6-Man Crew Cab 104/250 354 Includes - : ARM REST (2) Molded Plastic; One Each Door : CLEARANCE/MARKER LIGHTS (5) Flush Mounted : COAT HOOK, CAB Located on Rear Wall, Centered Above Rear Window : CUP HOLDERS Two Cup Holders, Located in Lower Center of Instrument Panel : DOME LIGHT, CAB Rectangular, Door Activated and Push On -Off at Light Lens, Timed Theater Dimming, Integral to Console, Center Mounted : GLASS, ALL WINDOWS Tinted : GRAB HANDLE, CAB INTERIOR (1) "A" Pillar Mounted, Passenger Side : GRAB HANDLE, CAB INTERIOR (2) Front of "B" Pillar Mounted, One Each Side : GRAB HANDLE, CAB INTERIOR (4) Two Each Side, Rear Door Mounted at Hinge Side and "C" Pillar Mounted : INTERIOR SHEET METAL Upper Door (Above Window Ledge) Painted Exterior Color : STEP (8) Two Steps Per Door Notes : 43.9" CA Loss 16975 HEATER HOSES Silicone 0/0 0 16990 AIR CONDITIONER, PROVISION FOR Accommodation Package, for Air 28/-1 27 Conditioning, Includes (1) SD7 Sanden Auxiliary Compressor in Secondary Compressor Position and Compressor Drive Effects for Vehicle With Primary Compressor Mounting 16HBA GAUGE CLUSTER English With English Electronic Speedometer 0/0 0 Includes : GAUGE CLUSTER (5) Engine Oil Pressure (Electronic), Water Temperature (Electronic), Fuel (Electronic), Tachometer (Electronic), Voltmeter : ODOMETER DISPLAY, Miles, Trip Miles, Engine Hours, Trip Hours, Fault Code Readout : WARNING SYSTEM Low Fuel, Low Oil Pressure, High Engine Coolant Temp, and Low Battery Voltage (Visual and Audible) 16HGH GAUGE, OIL TEMP, ALLISON TRAN 1/0 1 16HHE GAUGE, AIR CLEANER RESTRICTION {Filter -Minder} With Black Bezel Mounted 2/0 2 in Instrument Panel 16HKT IP CLUSTER DISPLAY On Board Diagnostics Display of Fault Codes in Gauge 0/0 0 Cluster 16JNV SEAT, DRIVER {National 2000) Air Suspension, High Back With Integral Headrest, -16/-9 -25 Cloth, Isolator, 1 Chamber Lumbar, 2 Position Front Cushion Adjust, -3 to +14 Degree Back Angle Adjust Includes : SEAT BELT 3-Point, Lap and Shoulder Belt Type 7 Proposal: 11713-01 INTERNATIQNAV Vehicle Specifications September 15, 2014 2016 4300 SBA LP 4X2 (MH026) Code Description FIR Wt Tot Wt (Ibs) (Ibs) 16LJZ SEAT, REAR {National 2000) Two Individual Outboard Seats, NF.PA Compliant, 133/39 172 Air Suspension, High Back, Cloth, Isolator, Lumbar, with 2 Position Front Cushion Adjustment, -3 to +14 Degree Back Angle Adjust, with 18" Wide Cushion and 20" Seat Back Includes : SEAT BELT Two 3-Point Shoulder Belts 16RPX SEAT, PASSENGER {National) Air -Suspension, High Back With Integral Headrest, 60/20 80 Cloth, Isolated, 1 Chamber Lumbar, 2 Position Front Cushion Adjustment, -3 to +14 Degree Seat Back Adjustment Includes : SEAT BELT 3-Point, Lap and Shoulder Belt Type 16SAP GRAB HANDLE, ADDITIONAL EXT (1) Chrome; Towel Bar Type With Anti -Slip 3/0 3 Rubber Insert; Mounted Left Side on Exterior, Rear of Rear Door, With Crew Cab 16SDC GRAB HANDLE (2) Chrome Towel Bar Type With Anti -Slip Rubber Inserts; for Cab 6/0 6 Entry, Mounted Left and Right, Each Side at "B" Pillar 16SDU MIRRORS (2) {Lang Mekra) Styled; Rectangular, 7.09" x 15.75" & Integral Convex 8/0 8 Both Sides,102" Inside Spacing, Breakaway Type, Heated Heads Thermostatically Controlled, Power Both Sides, Clearance Lights LED, Bright Finish Heads & Brackets 16VCA SEAT BELT All Red; 4 to 6 0/0 0 16VCN KEYLESS ENTRY SYSTEM REMOTE With Panic Alarm and Horn Beep Lock 1/0 1 Confirmation, With Auxiliary Button for Work Light Function Includes One Key Fob 16WBY ARM REST, RIGHT, DRIVER SEAT 3/0 3 16WBZ ARM REST, LEFT, PASSENGER SEAT 3/0 3 16WCT AIR CONDITIONER {Blend -Air) With Integral Heater & Defroster 67/4 71 Includes : HEATER HOSES Premium : HOSE CLAMPS, HEATER HOSE Mubea Constant Tension Clamps : REFRIGERANT Hydrofluorocarbon HFC-134A 16WHJ HOSE CLAMPS, HEATER HOSE {Breeze) Belleville Washer Type 0/0 0 16WJS INSTRUMENT PANEL Center Section, Flat Panel 0/0 0 16WJV WINDOW, POWER (4) And Power Door Locks, Front and Rear Doors, Left and 10/0 10 Right, Includes Express Down Feature 16WKY HVAC FRESH AIR FILTER 4/0 4 16WLS FRESH AIR FILTER Attached to Air Intake Cover on Cowl Tray in Front of 1/0 1 Windshield Under Hood 16WSE LOW WASHER FLUID INDICATOR 1/0 1 16WSJ CAB INTERIOR TRIM Premium; for Crew Cab 0/0 0 Includes : "A" PILLAR COVER Molded Plastic : CAB INTERIOR TRIM PANELS Cloth Covered Molded Plastic, Full Height; All Exposed Interior Sheet Metal is Covered Except for the Following: with a Two -Man Passenger Seat or with a Full Bench Seat the Back Panel is Completely Void of Covering 8 Proposal: 11713-01 NTE RNATIONAV Vehicle Specifications September 15, 2014 2015 4300 SBA LP 4X2 (MH025) Code Description FIR Wt Tot Wt CAB SOUND IN (Ibs) (Ibs) INSULATION Includes Dash and Engine Cover Insulators : CONSOLE, OVERHEAD Molded Plastic; With Dual Storage Pockets with Retainer Nets, CB Radio Pocket, Speakers, and Reading Lights : COURTESY LIGHT (4) Mounted In Front and Rear Map Pockets - Left and Right Sides : DOOR TRIM PANELS with Cloth Insert on Bolster Driver and Passenger Doors : FLOOR COVERING Rubber, Black : GAUGE, TEMPERATURE, AMBIENT Includes Wiring and Sensor With Display Unit Mounted in Cluster : HEADLINER Soft Padded Cloth : INSTRUMENT PANEL TRIM Molded Plastic with Black Center Section : STORAGE POCKET, DOOR (2) Molded Plastic (Carpet Texture), Full -Length; Driver and Passenger Doors : SUN VISOR (3) Padded Vinyl: 2 Moveable (Front -to -Side) Primary Visors, Driver Side with Vanity Mirror and Toll Ticket Strap, plus 1 Auxiliary Visor (Front Only), Driver Side 16WSK CAB REAR SUSPENSION Air Bag Type 33/11 44 27DMC WHEELS, FRONT DISC; 22.5" Polished Aluminum, 10-Stud (285.75MM BC) Hub -208/0 -208 Piloted, Flanged Nut, Metric Mount, 8.25 DC Rims; With Steel Hubs Notes : Aluminum Wheels not Painted or Coated : Compatible Tire Sizes: 11 R22.5, 12R22.51 255/70R22.51 255/80R22.57 265/75R22.51 275/70R22.5, 275/80R22.51295/75R22.5, 295/80R2215 28DMC WHEELS, REAR DUAL DISC; 22.5" Polished Aluminum, 10-Stud (285.75MM BC) 0/163 163 Hub Piloted, Flanged Nut, Metric Mount, 8.25 DC Rims; With Steel Hubs Notes : Aluminum Wheels not Painted or Coated : Compatible Tire Sizes: 11 R22.5, 12R22.5, 255/70R22.51 255/80R22.51 265/75R22.5, 275/70R22.5, 275/80R22.51 295/75R22.5, 295/80R22,5 : Polished Surface Outside Dual Only 29580 WHEEL SEALS, FRONT {International} Oil -Lubricated Wheel Bearings 0/0 0 29ACD TIRE VALVE CAP Flo-Thru Design 0/0 0 29WLA WHEEL BEARING, FRONT, LUBE {EmGard 50W} Synthetic Oil 0/0 0 60ACW BDY INTG,I/0 EXPANSION HARNESS {for Diamond Logic Builder} In -Cab wire 1/0 1 harness (DLB) program only, Includes a harness with five blunt cut wires routed on lower left of instrument panel. Two ground active inputs and two (.5Amp) relay drivers outputs are provided 7702618102 (4) TIRE, REAR 265/75R22.5 G622 RSD (GOODYEAR) 534 rev/mile, load range 0/104 104 G, 14 ply 7702618107 (2) TIRE, FRONT 265/75R22.5 G661 HSA (GOODYEAR) 539 rev/mile, load range 52/0 52 G, 14 ply Services Section: 40109 WARRANTY Standard for Durastar 1000/4000 Series, Effective with Vehicles Built 0/0 0 January 2, 2014 or Later, CTS-24750 Total Component Weight: GROVER AIR HORNS MTD. ON HOOD 7664/3837 11501 0/0 0 E Proposal: 11713-01 1NTERNATIONAV Vehicle Specifications September 15, 2014 2015 4300 SBA LP 4X2 (MIH025) Code Description F/R Wt Tot Wt (Ibs) (Ibs) AUXILIARY AIR TANK W/ CHECK VALVE AND PLUMB TO THE EXISTING AIR 0/0 0 TANK, BUT DEDICATE AUXILIARY AIR TANK TO BE USED FOR THE AIR HORNS WHEELBASE MODIFICATION TO 112" C/A 0/0 0 150 DAY TERMS - FROM INT'L FACTORY INVOICE DATE 0/0 0 ADDITIONAL LEVELING VALVE 0/0 0 FURNISH & INSTALL (2) ARM RESTS FOR THE REAR SEATS. 0/0 0 RED DOT A/C UNIT 0/0 0 Total Goods Purchased: 0/0 0 The weight calculations included in this proposal are an estimate of future vehicle weight. The actual weight as manufactured may be different from the estimated weight. Navistar, Inc. shall not be liable for any consequences resulting from any differences between the estimated weight of a vehicle and the actual weight. 10 Proposal: 11713-01 INTERNAT QNAV Turning Radius Summary September 15, 2014 2015 4300 SBA LP 4X2 (MH025) i CENTER r ,N �a M' €i ' t,,k, Turning � �� o Radius 32 9 , ! Curb ae Clearance: Wall II t 1 Clearance: C' 14.97 CH: O6" CI: 5.28 TR: 3 2' TR CR lie - -C TAN: 10- 09 Series: Model: Description: Model Year: 4000 MH025 4300 SBA LP 4X2 2015 Calculation Factors Wheelbase: 236 Front Axle: 0002ARX Description: AXLE, FRONT NON -DRIVING, {Meritor MFS-10-143A) Wide Track, I -Beam Type, 10,000-lb Capacity Front Wheel: 0027DMC Description: WHEELS, FRONT, DISC; 22.5" Polished Aluminum, 10-Stud (285.75MM BC) Hub Piloted, Flanged Nut, Metric Mount, 8.25 DC Rims; With Steel Hubs Front Tire: 07702618107 Description: TIRES, 265/75R22.5 G661 HSA (GOODYEAR) 539 rev/ mile, load range G, 14 ply Steering Gear: 0005PSM Description: STEERING GEAR, (Sheppard HD94) Power Turning Radius Statistics General Information Inside Turn Angle: Radial Overhang: Axle Information KingPin Inclination: KingPin Center: 48 Degrees 19 6.25 Degrees 71.5 Turning Radius - Curb View C - Curb Contact Length: Cl - Curb Clearance Increment: CR - Curb Clearance Radius: CH - Curb Height: TR - Turning Radius: TW - Tire Width: * All Measurements are in inches, unless otherwise specified. 14.97 5.28 33'3" 611 32'9" 10.00 This information is based on engineering information available at this time. Actual figures may vary. Navistar, Inc. cannot accept liability for consequences due to this variance. 11 Proposal: 11713-01 1 NTE RNATIONAV Financial Summary September 15, 2014 2015 4300 SBA LP 4X2 (MH025) (US DOLLAR) Description Net Sales Price: Price $95,624.00 Please feel free to contact me regarding these specifications should your interests or needs change. I am confident you will be pleased with the quality and service of an International vehicle. Approved by Seller: Official Title and Date Authorized Signature This proposal is not binding upon the seller without Seller's Authorized Signature Accepted by Purchaser: Firm or Business Name Authorized Signature and Date Official Title and Date The TOPS FET calculation is an estimate for reference purposes only. The seller or retailer is responsible for calculating and reporting/paying appropriate FET to the IRS. 12 Proposal: 11713-01 EXHIBIT C - TR 12558 3431 NW 2 "' Avenue • Ocala,, Florida 34475 352-62-6305 e 3 52-62 -20.1 TollFree: : - 00-524-60 2 AMBULANCE PROPOSAL DATE: September 22, 2014 This Proposal has been prepared for: Steve Stillwell Tamarac Fire Rescue 6000 North Hiatus Road Tamarac, FL 33321 We propose to furnish to you two (2) 2015 Horton model 623 rescue units on a 2015 International 430OLP crew cab chassis, to be custom built and equipped in accordance with the requirements of the Tamarac Fire Rescue department. Pricing is based on Florida Sheriffs Association Contract #11-10-1202, specification 02. Delivery will be F.O.B. Tamarac, FL and will be approximately 240-280 days from receipt of purchase order. Terms of payment shall be cash on delivery (COD) when unit arrive at Tamarac Fire Rescue, facility. Prepayment discounts are available. The current purchase price for the specified Ambulance is $277,912.00 each. This proposal shall expire October 31, 2014 unless extended in writing. This proposal is deemed acceptable by the undersigned. In witness whereof, The Company and the Purchaser shall execute an agreement to this proposal with signatures from authorized representatives as of the date set forth by each. Total price each unit: $2779912.00 Total Price for two units: Company: By: M;c" Br Title: _Ambulance Sales Manager Date: September 22, 2014 $5559824600 Purchaser: By: Title: Date: Drawings submitted are for reference only. Pricing is based on enclosed written specifications. Quote#11818, Revision 1 TR 12558- Exhibit D ANNOUNCEMENT 10", 1202 FIRE RESCUE VEHICLES & OTHER FLEET EQUIPMENT Participating Law Enforcement, Fire/Rescue 8L Local Governmental Agencies of the State of Florida Coordinated By The Florida Fire Chiefs' Association, Florida Sheriffs Association & Florida Association of Counties FEOR.IDA COUNTIES All About Florida DATE: TO: FROM: FLORIDA SHERIFFS ASSOCIATION P. 0. Boxy 1251.9 . Tallahassee, 11"1. 323 7-25 9 P=-ION'E (50) 877- 2165 • FAX (3 ) 373-866 WEB SITE: www. flsheriff4. org January 3, 2014 PROSPECTIVE PURCHASING AGENCIES Lynn Meek Contract Coordinator Peggy Goff Contract Manager Drew Terpak Contract Specialist RE: Additional Extension of Bid 11-10-1202 Fire Rescue Vehicles & Other Fleet Equipment (Extended from January 1, 2014 - December 31, 2014) The Florida Sheriffs Association will extend Bid 11-10-1202 through December 31, 2014. All terms and conditions will remain the same with the exception of the date. The Florida Sheriffs Association has agreed for manufacturers to cover any additional cost in the base model not to exceed three percent (3%) or a maximum aggregate of a six percent (6%) overall cost increase over the original base contract price and all options offered through Bid 11-10-1202, as allowed in Part B. item thirteen (13). This bid was originally effective from 2012 thru December January 1, December 31, 2012, but was extended from January 1 319 2013. Manufacturers also agreed to extend once 2014 thru December 31, 2014. January 1, 2013 thru again from Purchase orders should start at the base price for the vehicle being purchased and show the allowed increase. The end user should request documentation from the manufacturers in order to substantiate the increase. We appreciate your loyalty and continued support. TR 12558- Exhibit D TABLE OF CONTENTS Effective Dates & Ordering Instructions........................................................................................ 10 Overview of Awarded Specifications............................................................................................... 11 Awarded Manufacturers / Dealers.................................................................................................. 29 Basic Information REQUIRED for Purchase Orders....................................................................... 31 Specification #01 - Type I Ambulance - 4x2.................................................................................. 32 FordXLT F-350................................................................................................................. 34 FordXLT F-450................................................................................................................. 35 FordXLT F-550................................................................................................................. 36 Chevy Silverado 3500 HD.................................................................................................. 37 DodgeRam 3500............................................................................................................... 38 DodgeRam 4500............................................................................................................... 39 DodgeRam 5500............................................................................................................... 40 Specification #02 - Type I Ambulance, Medium Duty - 4x2........................................................... 41 FordF-650........................................................................................................................ 43 FreightlinerM2.................................................................................................................. 44 International Terrastar SFA............................................................................................... 45 International Durastar 430OM7......................................................................................... 46 International Durastar 430OLP.......................................................................................... 47 International Durastar 440OLP.......................................................................................... 48 SpartanMetro Star RT...................................................................................................... 49 Specification #03 - 'Type II Ambulance, Van - 4x2........................................................................ 50 FordE-350....................................................................................................................... 52 Sprinter..........................................................................................................................53 Specification #04 - 'type III Ambulance - 4x2................................................................................ 54 FordXL E-350................................................................................................................... 56 FordXL E-450................................................................................................................... 57 ChevyG3500 .. ► . ► ......... • .. . . . .:. .... ........ . . . . . . ...... 0 ........ 0 . . . . .............. . ... • .......... • . . ........ ► ........ ► ...... 58 ChevyG4500..................................................................................................................... 59 GMCG3500...................................................................................................................... 60 GMCG4500...................................................................................................................... 61 Sprinter..........................................................................................................................62 Specification #05 - 75' Mid Mounted Aerial Apparatus.................................................................. 63 Formed Stainless Steel Body Aluminum Ladder Sutphen Corporation - Sutphen SL75................................................................. 68 Specification #06 - 75' Rear Mounted Aerial Apparatus................................................................. 69 Extruded Aluminum Body Aluminum Ladder Hall -Mark Fire Apparatus (E-ONE) - E-ONE HP 75.......................................0..... 74 TR 12558- Exhibit D Specification #06 - 75' Rear Mounted Aerial Apparatus (continued) Steel Ladder Crimson Fire (Public Safety... ) - Crimson 75RMA................................................ 75 Ferrara Fire Apparatus, Inc. - Igniter XD............................................................ 75 Ferrara Fire Apparatus, Inc. Intruder • • • ..... • ............................... . 0 ........ ............ 0 75 Rosenbauer South Dakota, LLC - Spartan Metro Star 75' .............. a .................... 75 Formed Aluminum Body Aluminum Ladder Pierce Manufacturing, Inc. - Pierce Impel 75' HDL.............................................. 76 Steel Ladder American LaFrance, LLC - American LaFrance 75RML....................................... 77 Crimson Fire (Public Safety... ) - Crimson 75RMA................................................ 77 Kovatch Mobile Equip. Corp. (KME) - KME Predator AerialCat FL0675................ 77 Pierce Manufacturing, Inc. - Pierce Impel 75' HDL.............................................. 77 Rosenbauer South Dakota, LLC - Spartan Metro Star 75'...........................0.0.0... 77 Formed Stainless Steel Body Steel Ladder American LaFrance, LLC - American LaFrance 75RML....................................... 78 Crimson Fire (Public Safety...) - Crimson 75RMA................................................ 78 Specification #07 - 100' Mid Mounted Aerial Apparatus................................................................ 79 Extruded Aluminum Body Steel Ladder Ferrara Fire Apparatus, Inc. - Igniter XD............................................................ 84 Ferrara Fire Apparatus, Inc. - Spectr.................................................................. 84 Formed Aluminum Body Steel Ladder Kovatch Mobile Equip. Corp. (KME) - KME Predator AerialCat FL07100.............. 85 Pierce Manufacturing, Inc. - Pierce Arrow XT HDL.............................................. 85 Formed Stainless Steel Body Aluminum Ladder Sutphen Corporation - Sutphen SL100............................................................... 86 Specification #08 - 100' Rear Mounted Aerial Apparatus............................................................... 87 Extruded Aluminum Body Aluminum Ladder Hall -Mark Fire Apparatus (E-ONE) - E-ONE HP 100L......................................... 92 Steel Ladder Crimson Fire (Public Safety...) - Crimson 1 OORMA.............................................. 93 Ferrara Fire Apparatus, Inc. - Igniter XD............................................................ 93 Ferrara Fire Apparatus, Inc. - Spectr.................................................................. 93 Rosenbauer South Dakota, LLC - Spartan Gladiator 100'................................... 93 Formed Aluminum Body Aluminum Ladder Pierce Manufacturing, Inc. - Pierce Arrow XT HDL.............................................. 94 Steel Ladder American LaFrance, LLC - American LaFrance 100RMA..................................... 95 Kovatch Mobile Equip. Corp. (KME) - KME Predator AerialCat FL08103.............. 95 Pierce Manufacturing, Inc. - Pierce Arrow XT HDL.............................................. 95 Rosenbauer South Dakota, LLC - Spartan Gladitor 100'....................................0 95 Formed Stainless Steel Body Aluminum Ladder Pierce Manufacturing, Inc. - Pierce Arrow XT HAL-SS....................................... 9.96 TR 12558- Exhibit D Specification #08 - 100' Rear Mounted Aerial Apparatus (continued) Formed Stainless Steel Body Steel Ladder American LaFrance, LLC - American LaFrance 10ORMA..................................... 97 Crimson Fire (Public Safety... ) - Crimson 10ORMA.............................................. 97 Specification #09 - Mid Mounted Aerial Platform.......................................................................... 98 Extruded Aluminum Body Aluminum Ladder Hall -Mark Fire Apparatus (E-ONE) - E-ONE HP 95 MM.................................... 103 Steel Ladder Crimson Fire (Public Safety...) - Crimson MM 1009 ............................................ 104 Ferrara Fire Apparatus, Inc. - Igniter XD.......................................................... 104 Ferrara Fire Apparatus, Inc. - Spectr................................................................ 104 Rosenbauer South Dakota, LLC - Spartan Gladiator ......................................... 104 Formed Aluminum Body Steel Ladder American LaFrance, LLC - American LaFrance 100MMP................................... 105 Kovatch Mobile Equip. Corp. (KME) - KME Predator AerialCat FL09100............ 105 Pierce Manufacturing, Inc. - Pierce Arrow XT Mid Mount .................................. 105 Rosenbauer South Dakota, LLC - Spartan Gladitor........................................... 105 Formed Stainless Steel Body Aluminum Ladder Sutphen Corporation - SPH 100........................................................................ 106 Sutphen Corporation - SP 110........................................................................... 106 Steel Ladder American LaFrance, LLC - American LaFrance 1 OOMMP................................... 107 Crimson Fire (Public Safety...) - Crimson MM 1 00' . . . . ................ a .......... V ............ 107 Specification # 10 - Rear Mounted Aerial Platform ..................................... t................................ . Extruded Aluminum Body Aluminum Ladder Hall -Mark Fire Apparatus (E-ONE) - E-ONE HP 100P....................................... Steel Ladder Crimson Fire (Public Safety... ) - Crimson Star RM 100' ........................ 0 ..... 0 .... 00 Ferrara Fire Apparatus, Inc. - Igniter XD.......................................................... Ferrara Fire Apparatus, Inc. - Spectr............................................................... . Rosenbauer South Dakota, LLC - Spartan Gladiator ......................................... Formed Aluminum Body Aluminum Ladder Pierce Manufacturing, Inc. - Pierce Arrow XT Rear Mount PAP . . ...... 0 ........ . .. . . ... . Steel Ladder American LaFrance, LLC - American LaFrance 10ORMP................................... Kovatch Mobile Equip. Corp. (KME) - KME Predator AerialCat FLO10102.......... Pierce Manufacturing, Inc. - Pierce Arrow XT Rear Mount PAP . . . . .... 0 ........ ........ . Rosenbauer South Dakota, LLC - Spartan Gladitor........................................... Formed Stainless Steel Body Steel Ladder 113 114 114 114 114 115 116 116 116 116 American LaFrance, LLC - American LaFrance 100RMP................................... 117 Crimson Fire (Public Safety... ) - Crimson Star RM 1009 0 . . . 0.. . .. . . . . . . 0 . . . 0 ... 0. . . . .. . . . ... 117 TR 12558- Exhibit D Specification # 11 - Medium Duty Rescue Apparatus - 4x2.......................................................... 118 Extruded Aluminum Body FreightlinerM2-106................................................................................................. 121 Crimson Fire (Public Safety... ) - Crimson Star MR ............................................ 121 Ferrara Fire Apparatus, Inc. - FFA 108 MDR Rescue .......... a ............................. 121 Hall -Mark Fire Apparatus (E-ONE) - E-ONE REHN........................................... 121 Rosenbauer South Dakota, LLC - FSA Rescue 11............................................. 121 Wheeled Coach Industries, Inc. - Rescue Force FLS 11 FTLNR............. 0 .............. 121 International Durastar............................................................................................. 122 Crimson Fire (Public Safety... ) - Crimson Star MR ............................................ 122 Ferrara Fire Apparatus, Inc. - FFA 108 MDR Rescue ........................................ 122 Hall -Mark Fire Apparatus (E-ONE) - E-ONE REHN........................................... 122 Rosenbauer South Dakota, LLC - FSA Rescue 11............................................. 122 Wheeled Coach Industries, Inc. - Rescue Force FLS 11INTL ............................... 122 Formed Aluminum Body FreightlinerM2-106................................................................................................. 123 American LaFrance, LLC - American LaFrance 16' W/AR................................. 123 Kovatch Mobile Equip. Corp. (KME) - KME FL 11 MDR ....................................... 123 Pierce Manufacturing, Inc. - Pierce MDR.. ............................................... o .......... 123 Rosenbauer South Dakota, LLC - FSA Rescue 11............................................. 123 Toyne, Inc. (Southeastern... ) - Toyne Medium Rescue ....................................... 123 InternationalDurastar............................................................................................. 124 American LaFrance, LLC - American LaFrance 16' W/AR................................. 124 Kovatch Mobile Equip. Corp. (KME) - KME FL 11 MDR ....................................... 124 Pierce Manufacturing, Inc. - Pierce MDR .......................................................... 124 Rosenbauer South Dakota, LLC - FSA Rescue 11............................................. 124 Sutphen Corporation - Sutphen CR Series Rescue ............................................ 124 Toyne, Inc. (Southeastern...) - Toyne Medium Rescue ....................................... 124 Specification # 12 - Heavy Rescue Apparatus............................................................................... 125 Extruded Aluminum Body Crimson Fire (Public Safety...) - Crimson Star HR.................................................... 128 Ferrara Fire Apparatus, Inc. Igniter XY ` MFD ...... 0 . 0 ........ ... a ........ 0 .................. . . .... 128 Ferrara Fire Apparatus, Inc. - Intruder MFDXL........................................................ 128 Hall -Mark Fire Apparatus (E-ONE) - E-ONE REHN 'l'Yphoon.................................... 128 Rosenbauer South Dakota, LLC - Spartan Force ...................................................... 128 Formed Aluminum Body American LaFrance, LLC - American LaFrance 18' W/ACR....................................... 129 Kovatch Mobile Equip. Corp. (KME) - KME Predator FL 12HDR................................. 129 Pierce Manufacturing, Inc. - Pierce Saber HDR........................................................ 129 Rosenbauer South Dakota, LLC - Spartan Force.....................................................0 129 Sutphen Corporation - Sutphen R Series................................................................. 129 Toyne, Inc. (Southeastern...) - Spartan Heavy Rescue.............. o ........................... 129 Specification # 13 - 2500 Gallon Mobile Water Supply Fire Apparatus - 2 Door ............................ 130 Extruded Aluminum Body FreightlinerM2-106................................................................................................. 134 Crimson Fire (Public Safety... ) - Crimson Star Tanker ....................................... 134 Ferrara Fire Apparatus, Inc. - FFA T2500 Tanker ............................................. 134 Hall -Mark Fire Apparatus (E-ONE) - E-ONE TTSA............................................ 134 InternationalWorkstar............................................................................................. 135 Crimson Fire (Public Safety...) - Crimson Star Tanker ....................................... 135 Ferrara Fire Apparatus, Inc. - FFA T2500 Tanker ............................................. 135 Hall -Mark Fire Apparatus (E-ONE) - E-ONE TTSA............................................ 135 TR 12558- Exhibit D Specification # 13 - 2500 Gallon Mobile Water Supply Fire Apparatus - 2 Door (continued) Formed Aluminum Body FreightlinerM2-106 136 ................................................................................................. American LaFrance, LLC - American LaFrance T/A Tanker ............................... 136 Kovatch Mobile Equip. Corp. (KME) - KME Flatback FL132500 ......................... 136 Pierce Manufacturing, Inc. - Pierce Contender Series ........................................ 136 Rosenbauer South Dakota, LLC - FSA Tanker 13 136 ............................................. Toyne, Inc. (Southeastern...) - Toyne FFCSA-2500............................................ 136 International Workstar ... . ... . . 137 . . . ........ . ... ..................................................................... American LaFrance, LLC - American LaFrance T/A Tanker ............................... 137 Kovatch Mobile Equip. Corp. (KME) - KME Flatback FL132500 ......................... 137 Pierce Manufacturing, Inc. - Pierce Contender Series..... . 0 9 9 0 a a 0 6 a 4. 4. & 0 0 4. a 0 4. 8 f & 0 0 81 0 w 0 0 0. a 8 6 4. 8. 137 Rosenbauer South Dakota, LLC - FSA Tanker 13............................................. 137 Toyne, Inc. (Southeastern...) - Toyne FFCSA-2500............................................ 137 Formed Galvanneal Steel Body FreightlinerM2-106................................................................................................. 138 Kovatch Mobile Equip. Corp. (KME) - KME Flatback FL132500 ......................... 138 InternationalWorkstar............................................................................................. 139 Kovatch Mobile Equip. Corp. (KME) - KME Flatback FL132500 ......................... 139 Formed Stainless Steel Body FreightlinerM2-106................................................................................................. 140 Crimson Fire (Public Safety... ) - Crimson Star Tanker ....................................... 140 Kovatch Mobile Equip. Corp. (KME) - KME Flatback FL132500 ......................... 140 Toyne, Inc. (Southeastern...) - Toyne FFCSA-2500............................................ 140 InternationalWorkstar......................................................1...................................... 141 Crimson Fire (Public Safety...) - Crimson Star Tankers....... ............................... 141 Kovatch Mobile Equip. Corp. (KME) - KME Flatback FL132500 ......................... 141 Sutphen Corporation - Sutphen CTS-2500 Tanker ........................................... 141 Toyne, Inc. (Southeastern... ) - Toyne FFCSA-2500............................................ 141 Specification # 14 - Wildland Fire Apparatus............................................................................... 142 FordF-550...................................................................................................................... 145 American LaFrance, LLC - Wildland Brush ....................................................... 145 Ferrara Fire Apparatus, Inc. - Wildland Brush .................................................. 145 Hall -Mark Fire Apparatus (E-ONE) - Wildland.................................................. 145 Kovatch Mobile Equip. Corp. (KME) - KME WildlandFL 14WFA .......................... 145 Pierce Manufacturing, Inc. - Pierce F550 Wildland............................................ 145 Toyne, Inc. (Southeastern... ) - Wildland Brush ................................................. 145 DodgeRam 5500............................................................................................................. 146 American LaFrance, LLC - Wildland Brush ....................................................... 146 Ferrara Fire Apparatus, Inc. - Wildland Brush .................................................. 146 Hall -Mark Fire Apparatus (E-ONE) - Wildland...................0.............................. 146 Kovatch Mobile Equip. Corp. (KME) - KME Wildland FL 14WFA ......................... 146 International Durastar 4300M7........................................................0.......0..........0........... 147 American LaFrance, LLC - Wildland Brush ........................................ 0 .............. 147 Kovatch Mobile Equip. Corp. (KME) - KME Wildland FL 14WFA ......................... 147 Toyne, Inc. (Southeastern...) - Wildland Brush ............ 0 .. 0. 0 0 0 0 0 0 0 0 0 0 0 0 0 . . ........ . a ....... 147 Specification # 15 - Commercial Pumper - 2 Door ..................................................... 0 ........... 4 ...... 148 Extruded Aluminum Body FreightlinerM2-106................................................................................................. 151 Crimson Fire (Public Safety... ) - Crimson Star Pumper ...................................... 151 Ferrara Fire Apparatus, Inc. - FFA RP751 Pumper...................................0........ 151 Hall -Mark Fire Apparatus (E-ONE) - E-ONE TDPM........................................... 151 Rosenbauer South Dakota, LLC - FSA Pumper 13............................................ 151 TR 12558- Exhibit D Specification # 15 - Commercial Pumper - 2 Door (continued) Extruded Aluminum Body International Durastar............................................................................................. 152 Crimson Fire (Public Safety... ) - Crimson Star Pumper ...................................... 152 Ferrara Fire Apparatus, Inc. - FFA RP751 Pumper ............................................ 152 Hall -Mark Fire Apparatus (E-ONE) - E-ONE TDPM........................................... 152 Rosenbauer South Dakota, LLC - FSA Pumper 13............................................ 152 Sutphen Corporation - Sutephen C 1 Pumper .................................................... 152 Formed Aluminum Body FreightlinerM2-106................................................................................................. 153 American LaFrance, LLC - American LaFrance S/M Pumper ............................. 153 Crimson Fire (Public Safety... ) - Crimson Star Pumper ................... 0 ................... 153 Kovatch Mobile Equip. Corp. (KME) - KME Challenger FL 15COML.................... 153 Pierce Manufacturing, Inc. - Pierce Contender Series ........................................ 153 Rosenbauer South Dakota, LLC - FSA Tanker 13............................................. 153 Toyne, Inc. (Southeastern... ) - Toyne FFCSA Pumper ........................................ 153 InternationalDurastar ............................................................................................. 154 American LaFrance, LLC - American LaFrance S/M Pumper ............................. 154 Crimson Fire (Public Safety... ) - Crimson Star Pumper ............ . . . . . . . . . . . . . . . ... .... . . . . 154 Kovatch Mobile Equip. Corp. (KME) - KME Challenger FL 15COML.................... 154 Pierce Manufacturing, Inc. - Pierce Contender Series ................ . . . .. . ...... .... ... . .... 154 Rosenbauer South Dakota, LLC - FSA Tanker 13............................................. 154 Toyne, Inc. (Southeastern...) - Toyne FFCSA Pumper.. . o ............ o o . . . . .. . .. . . 0 ........ .. . 154 Formed Galvanneal Steel Body FreightlinerM2-106................................................................................................. 155 Kovatch Mobile Equip. Corp. (KME) - KME Challenger FL15COML.................... 155 International Workstar............................................................................................. 156 Kovatch Mobile Equip. Corp. (KME) - KME Challenger FL 15COML.................... 156 Formed Stainless Steel Body FreightlinerM2-106................................................................................................. 157 American LaFrance, LLC - American LaFrance S/M Pumper ............................. 157 Crimson Fire (Public Safety...) - Crimson Star Pumper ...................................... 157 Hall -Mark Fire Apparatus (E-ONE) - E-ONE PSIS ............................................ 157 Kovatch Mobile Equip. Corp. (KME) - KME Challenger FL 15COML.................... 157 Toyne, Inc. (Southeastern...) - Toyne FFCSA Pumper... ......................... 157 InternationalDurastar............................................................................................. 158 American LaFrance, LLC - American LaFrance S/M Pumper ............................. 158 Crimson Fire (Public Safety... ) - Crimson Star Pumper ............. . ..... ............ 0 ...... 158 Hall -Mark Fire Apparatus (E-ONE) - E-ONE PSIS ............................................ 158 Kovatch Mobile Equip. Corp. (KME) - KME Challenger FL15COML..................0. 158 Toyne, Inc. (Southeastern... ) - Toyne FFCSA Pumper ............ 0 ................... 0 ....... 158 Specification # 16 - Level I Custom Pumper - 4 Door................................................................... 159 Custom Chassis ExtrudedAluminum Body........................................................................................ 162 Hall -Mark Fire Apparatus (E-ONE) - E-ONE Typhoon Pumper .......................... 162 Sutphen Corporation - S-Series Custom........................................................... 162 FormedAluminum Body.......................................................................................... 163 Kovatch Mobile Equip. Corp. (KME) - KME Challenger FL 16LVL 1 ..................... 163 Pierce Manufacturing, Inc.. - Pierce Saber Series ............................................... 163 Sutphen Corporation - S-Series Custom........................................................... 163 Formed Galvanneal Steel Body................................................................................. 164 Kovatch Mobile Equip. Corp. (KME) - KME Challenger FL 16LVL 1 ..................... 164 Pierce Manufacturing, Inc. - Pierce Velocity SLT Series ..................................... 164 TR 12558- Exhibit D Specification # 16 - Level I Custom Pumper - 4 Door (continued) Formed Stainless Steel Body.................................................................................... 165 Hall -Mark Fire Apparatus (E-ONE) - E-ONE Typhoon Pumper .......................... 165 Kovatch Mobile Equip. Corp. (KME) - KME Challenger FL 16LVL 1 ..................... 165 Pierce Manufacturing, Inc. - Pierce Impel SS Series .......................................... 165 Spartan Chassis ExtrudedAluminum Body........................................................................................ 166 Crimson Fire (Public Safety... ) - Crimson Metro Star Pumper L 1....................... 166 Rosenbauer South Dakota, LLC - Spartan Force 16 .............................. a .......... 0 166 FormedAluminum Body.......................................................................................... 167 Crimson Fire (Public Safety... ) - Crimson Metro Star Pumper L 1 . . . . . . . ..... .. ... 0 ..... 167 Rosenbauer South Dakota, LLC - Spartan Force 16.......................................... 167 Toyne, Inc. (Southeastern... ) - Toyne Spartan Metro Star FFCSA ...................... Formed Stainless Steel Body.................................................................................... 167 168 Crimson Fire (Public Safety...) - Crimson Metro Star Pumper L 1....................... 168 Toyne, Inc. (Southeastern... } - Toyne Spartan Metro Star FFCSA ...................... 168 HME Chassis ExtrudedAluminum Body........................................................................................ 169 Ferrara Fire Apparatus, Inc. Intruder • . ► ...... • . .................... . . . ........................... 1 69 FormedAluminum Body.......................................................................................... 170 Toyne, Inc. (Southeastern... ) - Toyne 1871W FFCSA......................................... Formed Stainless Steel Body.................................................................................... 170 171 Toyne, Inc. (Southeastern...) - Toyne 1871W FFCSA......................................... 171 American LaFrance Chassis FormedAluminum Body.......................................................................................... 172 American LaFrance, LLC - American LaFrance Custom S/M Pumper ................ 172 Formed Stainless Steel Body.................................................................................... 173 American LaFrance, LLC - American LaFrance Custom S/M Pumper ................ 173 Specification # 17 - Level II Custom Pumper - 4 Door.................................................................. 174 Custom Chassis ExtrudedAluminum Body........................................................................................ 178 Ferrara Fire Apparatus, Inc. - Igniter XD LFD................................................... 178 Hall -Mark Fire Apparatus (E-ONE) - E-ONE Cyclone Pumper ........................... 178 Rosenbauer South Dakota, LLC - Commander FSA 17..................................... 178 Sutphen Corporation - Monarch Series Custom ................................................ FormedAluminum Body.......................................................................................... 178 179 Kovatch Mobile Equip. Corp. (KME) - KME Flatback FL 17LVL2 ........................ 179 Pierce Manufacturing, Inc. - Pierce Arrow XT Series ......................................... 179 Rosenbauer South Dakota, LLC - Commander FSA 17..................................... 179 Formed Galvanneal Steel Body................................................................................. 180 Kovatch Mobile Equip. Corp. (KME) - KME Flatback FL 17LVL2 ........................ 180 Pierce Manufacturing, Inc. - Pierce Quantum Series ......................................... 180 Formed Stainless Steel Body.................................................................................... Hall -Mark Fire Apparatus (E-ONE) - E-ONE Cyclone Pumper ........................... 181 181 Kovatch Mobile Equip. Corp. (KME) - KME Flatback FL 17LVL2 ........................ 181 Pierce Manufacturing, Inc. - Pierce Velocity Series ............................................ 181 Spartan Chassis ExtrudedAluminum Body........................................................................................ 182 Crimson Fire (Public Safety... ) - Crimson Metro Star Pumper L2 ....................... 182 Rosenbauer South Dakota, LLC - Spartan Gladiator 17.................................... 182 FormedAluminum Body.......................................................................................... Crimson Fire (Public Safety...) - Crimson Metro Star Pumper L2 ....................... 183 183 Rosenbauer South Dakota, LLC - Spartan Gladiator 17.................................... 183 Toyne, Inc. (Southeastern... ) - Toyne Spartan Gladiator .................................... 183 TR 12558- Exhibit D Specification # 16 - Level I Custom Pumper 4 Door (continued) Spartan Chassis Formed Stainless Steel Body.................................................................................... Crimson Fire (Public Safety...) - Crimson Metro Star Pumper L2 ...................... . Toyne, Inc. (Southeastern...) - Toyne Spartan Gladiator .................................... HME Chassis ExtrudedAluminum Body........................................................................................ Ferrara Fire Apparatus, Inc. Spectr LFD......... a . . . . ............. . . . ............. . . . ...... 0 ... . FormedAluminum Body.......................................................................................... Toyne, Inc. (Southeastern...) - Toyne Spectr..................................................... Formed Stainless Steel Body.................................................................................... Toyne, Inc. (Southeastern...) - Toyne Spectr..................................................... American LaFrance Chassis FormedAluminum Body......................................................................................... . American LaFrance, LLC - American LaFrance Custom Rescue Pumper............ Formed Stainless Steel Body.................................................................................... American LaFrance, LLC - American LaFrance Custom Rescue Pumper............ 185 185 186 186 187 187 MearsMotor Leasing................................................................................................................... 190 Enterprise Fleet Management ......... ...............0.6.......... 191 ................................................................ TR 12558- Exhibit D r V, P. O. Box 1.251.9 . Tallahassee, FL 3231.7-251.9 PI-IONE (350) 877-21.65 . FA (50) 73-3605 WEB SITE: www.flsherif-fs.org DATE: January 1, 2012 TO: ALL PROSPECTIVE PARTICIPANTS FROM: Steve Casey Lynn Meek Peggy Goff Executive Director Vehicle Bid Coordinator Vehicle Contract Manager RE: PARTICIPATING LAW ENFORCEMENT, FIRE/RESCUE & LOCAL GOVERNMENTAL AGENCIES OF THE STATE OF FLORIDA COOPERATIVE BID FOR FIRE/RESCUE VEHICLES & OTHER FLEET EQUIPMENT Bid No. 11-10-1202 We are pleased to announce that the Florida Fire Chiefs' Association, the Florida Sheriffs Association and the Florida Association of Counties has successfully conducted its tenth statewide competitive bid for fire & rescue vehicles. Bids will be extended and guaranteed to any and all units of local governments/political subdivisions including but not limited to county, local county board of public instruction, municipalities and other local public or public safety agencies or authorities within the State of Florida. In addition to the eligible users referenced above and with the consent of the successful bidder(s) purchases may be made under the terms and conditions of this contract by governmental entities located outside the State of Florida. Appropriate governmental entities' purchasing laws, rules and regulations shall apply to purchases made under this contract. This contract is effective January 1, 2012 thru December 31, 2012. All interested parties who wish to purchase from this contract may do so by following these simple procedures: ORDERING INSTRUCTIONS 1. Contact the awarded manufacturer/dealer (see page 29) listed which you wish to purchase and advise them of your interest to purchase from the Fire Rescue Vehicles & Other Fleet Equipment Bid No. 11-10-1202. They will assist you with the placement of your order and answer any questions you may have regarding the vehicles purchased through this program. IMPORTANT NOTE: All agencies ordering any FORD, GENERAL, MOTORS, or CHRYSLER product, please be advised that you must use the appropriate FIN CODE/FAN CODE for the Florida Sheriffs Association in order to obtain the manufacturer's concessions. Also, you must TR 12558- Exhibit D use your FIN CODE/FAN CODE as a secondary number. For further assistance call the Fleet Customer Information Center for your appropriate manufacturer. Manufacturer Type Code FSA Code Fleet Center Contact Numbers FORD FIN CODE QE065 1-800-34-FLEET (1-800-343-5338) GENERAL MOTORS FAN CODE 917872 1-800-FLEET OP (1-800-353-3867) CHRYSLER FAN CODE 49313 1-800-999-FLEET (1-800-999-3533) 2. YOU MUST send a copy of the ORIGINAL PURCHASE ORDER (including FSA's Contract No. 11-10-12021 you submitted to the participating manufacturer to: Florida Sheriffs Association P. O. Box 12519 Tallahassee, Florida 32317-2519 ATTN: Lynn Meek, Cooperative Bid Coordinator hneek@flsheriffs.org 3. Basic information required on all Rurchase orders is listed on Page 31 of this Bid Award Announcement. Purchase orders lacking the required basic information listed may result in the delay of placement and/or confirmation of orders. NOTE: Purchasers are reminded that the issuance of a Purchase Order does not in itself guarantee the placement of an order. The agency is responsible for obtaining a "Confirmation of Order" from the respective manufacturer. Manufacturers are required to complete a "Confirmation of Order" and send it to the purchaser within fourteen (14) calendar days after receipt of purchase order. Purchasers are encouraged to contact the dealer if a "Confirmation of Order" has not been received within a reasonable time frame and request its issuance. This program is designed to provide participating agencies with the most economically priced fire & rescue vehicles and other fleet equipment tailored to their specific needs, in a prompt and timely manner. The Florida Fire Chiefs' Association, the Florida ' Sheriffs Association and the Florida Association of Counties bid award for fire & rescue vehicles and other fleet equipment are as follows: OVE__ E_W_ of AWARDED SPECIFICATIONS Name of Manufacturer Type Vehicle SPECIFICATION # 01 — TYPE I AMBULANCE (4 x 2) Base Unit Price Braun Industries, Inc. Ford XLT F-350 $ 1179190.00 ETR, L.L.C. (AEV) Ford XLT F-350 $ 98,029.00 Excellance, Inc. Ford XLT F-350 $ 133,038.00 Hall -Mark Fire Apparatus, Inc. (Horton) Ford XLT F-350 $ 1279434.00 Pierce Manufacturing, Inc. (Medtec) Ford XLT F-350 $ 97,987.00 TR 12558- Exhibit D Name of Manufacturer Type Vehicle SPECIFICATION # 41 - TYPE I AMBULANCE (4 x 2� (cont'd) Quality Emergency Vehicles Sales Base Unit Price & Service, Inc. (Osage) Ford XLT F-350 $ 118, 775.00 Road Rescue Emergency Vehicles Ford XLT F-350 $ 105, 500.00 Stat-Line Industries (McCoy Miller) Ford XLT F-350 $ 95, 700.00 Wheeled Coach Industries, Inc. Ford XLT F-350 $ 102, 500.00 Braun Industries, Inc. Ford XLT F-450 $ 141, 778.00 ETR, L.L.C. (AEV) Ford XLT F-450 $ 115, 854.00 Excellance, Inc. Ford XLT F-450 $ 137, 506.00 Hall -Mark Fire Apparatus, Inc. (Horton) Ford XLT F-450 $ 160, 515.00 Pierce Manufacturing, Inc. (Medtec) Ford XLT F-450 $ 1099127.00 Quality Emergency Vehicles Sales & Service, Inc. (Osage) Ford XLT F-450 $ 114, 775.00 Road Rescue Emergency Vehicles Ford XLT F-450 $ 132, 500.00 Stat-Line Industries (McCoy Miller) Ford XLT F-350 $ 1139000.00 Wheeled Coach Industries, Inc. Ford XLT F-450 $ 114, 368.00 ETR, L.L.C. (AEV) Ford XLT F-550 $ 1199593.00 Hall -Mark Fire Apparatus, Inc. (Horton) Ford XLT F- 550 $ 1629429.00 Pierce Manufacturing, Inc. (Medtec) Ford XLT F-550 $ 111, 665.00 Road Rescue Emergency Vehicles Ford XLT F-550 $ 135, 500.00 Wheeled Coach Industries, Inc. Ford XLT F-550 $ 116,259.00 ETR, L.L.C. (AEV) Chevy Silverado 3500 HD $ 98, 842.00 Excellance, Inc. Chevy Silverado 3500 HD $ 1239936.00 Pierce Manufacturing, Inc. (Medtec) Chevy Silverado 3500 HD $ 1049072.00 Road Rescue Emergency Vehicles Chevy Silverado 3500 HD $ 125, 500.00 Stat-Line Industries (McCoy Miller) Chevy Silverado 3500 HD $ 989,892.00 Wheeled Coach Industries, Inc. Chevy Silverado 3500 HD $ 101, 600.00 Braun Industries, Inc. Dodge Ram 3500 $ 123, 631.00 Road Rescue Emergency Vehicles Dodge Ram 3500 $ 102, 500.00 Stat-Line Industries (McCoy Miller) Dodge Ram 3500 $ 110, 504.00 Wheeled Coach Industries, Inc. Dodge Ram 3500 $ 103, 500.00 Braun Industries, Inc. Dodge Ram 4500 $ 1449891.00 ETR, L.L.C. (AEV) Dodge Ram 4500 $ 117, 485.00 Excellance, Inc. Dodge Ram 4500 $ 142,928.00 Hall -Mark Fire Apparatus, Inc. (Horton) Dodge Ram 4500 $ 162,463.00 Pierce Manufacturing, Inc. (Medtec) Dodge Ram 4500 $ 112, 991.00 Quality Emergency Vehicles Sales & Service, Inc. (Osage) Dodge Ram 4500 $ 122, 775.00 Road Rescue Emergency Vehicles Dodge Ram 4500 $ 132, 500.00 Stat-Line Industries (McCoy Miller) Dodge Ram 4500 $ 117, 530.00 Wheeled Coach Industries, Inc. Dodge Ram 4500 $ 115, 000.00 TR 12558- Exhibit D Name of Manufacturer N # 01 — TYPE I (cont'd) ETR, L.L.C. (AEV) Hall -Mark Fire Apparatus, Inc. (Horton) Pierce Manufacturing, Inc. (Medtec) Road Rescue Emergency Vehicles Wheeled Coach Industries, Inc. ON # 02 — TYPE I Braun Industries, Inc. ETR, L.L.C. (AEV) Hall -Mark Fire Apparatus, Inc. (Horton) Pierce Manufacturing, Inc. (Medtec) Road Rescue Emergency Vehicles Wheeled Coach Industries, Inc. Braun Industries, Inc. ETR, L.L.C. (AEV) Excellance, Inc. Hall -Mark Fire Apparatus, Inc. (Horton) Pierce Manufacturing, Inc. (Medtec) Road Rescue Emergency Vehicles Wheeled Coach Industries, Inc. Braun Industries, Inc. ETR, L.L.C. (AEV) Excellance, Inc. Hall -Mark Fire Apparatus, Inc. (Horton) Pierce Manufacturing, Inc. (Medtec) Quality Emergency Vehicles Sales & Service, Inc. (Osage) Road Rescue Emergency Vehicles Wheeled Coach Industries, Inc. Braun Industries, Inc. ETR, L.L.C. (AEV) Excellance, Inc. Hall -Mark Fire Apparatus, Inc. (Horton) Pierce Manufacturing, Inc. (Medtec) Quality Emergency Vehicles Sales & Service, Inc. (Osage) Road Rescue Emergency Vehicles Wheeled Coach Industries, Inc. Type Vehicle 2 Base Unit Price Dodge Ram 5500 $ 121, 083.00 Dodge Ram 5500 $ 165, 885.00 Dodge Ram 5500 $ 1159190.00 Dodge Ram 5500 $ 133, 900.00 Dodge Ram 5500 $ 1169450.00 DUTY (4 Ford F-650- $ 174, 382.00 Ford F-650 $ 1469448.00 Ford F-650 $ 194, 524.00 Ford F-650 $ 156, 641.00 Ford F-650 $ 158, 500.00 Ford F-650 $ 134, 500.00 Freightliner M2 $ 1829274.00 Freightliner M2 $ 147, 730.00 Freightliner M2 $ 1639440.00 Freightliner M2 $ 202,153.00 Freightliner M2 $ 156, 989.00 Freightliner M2 $ 166, 500.00 Freightliner M2 $ 139, 500.00 International TerraStar SFA $ 1609026.00 International TerraStar SFA $ 132, 549.00 International TerraStar SFA $ 147, 066.00 International TerraStar SFA $ 183, 094.00 International TerraStar SFA $ 145, 997.00 International TerraStar SFA $ 1399355.00 International TerraStar SFA $ 148, 500.00 International TerraStar SFA $ 128, 500.00 International Durastar 4300M7 $ 1889,352.00 International Durastar 4300M7 $ 149, 885.00 International Durastar 4300M7 $ 1669163.00 International Durastar 4300M7 $ 1999,992.00 International Durastar 4300M7 $ 1639278.00 International Durastar 4300M7 $ 1579350.00 International Durastar 4300M7 $ 163, 500.00 International Durastar 4300M7 $ 148, 500.00 TR 12558- Exhibit D Name of Manufacturer Type Vehicle SPECIFICATION # 02 - TYPE I AMBULANCE, MEDIUM DUTY (4 x 2l (cont'd) Braun Industries, Inc. ETR, L.L.C. (AEV) Excellance, Inc. Hall -Mark Fire Apparatus, Inc. (Horton) Pierce Manufacturing, Inc. (Medtec) Quality Emergency Vehicles Sales & Service, Inc. (Osage) Road Rescue Emergency Vehicles Wheeled Coach Industries, Inc. Braun Industries, Inc. ETR, L.L.C. (AEV) Hall -Mark Fire Apparatus, Inc. (Horton) Pierce Manufacturing, Inc. (Medtec) Quality Emergency Vehicles Sales & Service, Inc. (Osage) Road Rescue Emergency Vehicles Wheeled Coach Industries, Inc. Braun Industries, Inc. ETR, L.L.C. (AEV) Hall -Mark Fire Apparatus, Inc. (Horton) Road Rescue Emergency Vehicles Wheeled Coach Industries, Inc. Base Unit Price International Durastar 430OLP $ 189, 086.00 International Durastar 430OLP $ 158, 751.00 International Durastar 430OLP $ 170, 091.00 International Durastar 430OLP $ 201, 260.00 International Durastar 430OLP $ 167, 828.00 International. Durastar 430OLP $ 160, 945. 00 International Durastar 430OLP $ 171, 500. 00 International Durastar 430OLP $ 152, 500. 00 International Durastar 440OLP $ 1959902.00 International Durastar 440OLP' $ 159, 934.00 International Durastar 440OLP $ 202, 732.00 International Durastar 440OLP $ 173, 284.00 International Durastar 440OLP $ 166, 990. 00 International Durastar 440OLP $ 172, 500. 00 International Durastar 440OLP $ 1589350.00 Spartan Metro Star RT $ 269, 628.00 Spartan Metro Star RT $ 236,464.00 Spartan Metro Star RT $ 2909375.00 Spartan Metro Star RT $ 245, 500.00 Spartan Metro Star RT $ 233, 320.00 SPECIFICATION # 03 - TYPE II AMBULANCE, VAN (4 x 2), ETR, L.L.C. (AEV) Ford E-350 $ 55, 741.00 Pierce Manufacturing, Inc. (Medtec) Ford E-350 $ 539435.00 Quality Emergency Vehicles Sales & Service, Inc. (Osage) Ford E-350 $ 64, 230.00 Road Rescue Emergency Vehicles Ford E-350 $ 59, 500.00 Stat-Line Industries (McCoy Miller) Ford E-350 $ 599,990.00 Wheeled Coach Industries, Inc. Ford E-350 $ 56, 532.00 ETR, L.L.C. (AEV) Sprinter $ 72, 571.00 Road Rescue Emergency Vehicles Sprinter $ 78, 500.00 Stat-Line Industries (McCoy Miller) Sprinter $ 82, 500.00 Wheeled Coach Industries, Inc. Sprinter $ 76, 000.00 SPECIFICATION # 04 --TYPE III AMBULANCE (4 x 2) Braun Industries, Inc. Ford XL E-350 $ 97, 306.00 ETR, L.L.C. (AEV) Ford XL E-350 $ 85,198.00 Excellance, Inc. Ford XL E-350 $ 108, 758.00 TR 12558- Exhibit D Name of Manufacturer Type Vehicle SPECIFICATION #44 - TYPE III AMBULANCE (4 x 2) (cont'd) Hall -Mark Fire Apparatus, Inc. (Horton) Pierce Manufacturing, Inc. (Medtec) Quality Emergency Vehicles Sales & Service, Inc. (Osage) Road Rescue Emergency Vehicles Stat-Line Industries (McCoy Miller) Wheeled Coach Industries, Inc. Braun Industries, Inc. ETR, L.L.C. (AEV) Excellance, Inc. Hall -Mark Fire Apparatus, Inc. (Horton) Pierce Manufacturing, Inc. (Medtec) Quality Emergency Vehicles Sales & Service, Inc. (Osage) Road Rescue Emergency Vehicles Stat-Line Industries (McCoy Miller) Wheeled Coach Industries, Inc. Braun Industries, Inc. ETR, L.L.C. (AEV) Excellance, Inc. Hall -Mark Fire Apparatus, Inc. (Horton) Pierce Manufacturing, Inc. (Medtec) Quality Emergency Vehicles Sales & Service, Inc. (Osage) Road Rescue Emergency Vehicles Stat-Line Industries (McCoy Miller) Wheeled Coach Industries, Inc. Braun Industries, Inc. ETR, L.L.C. (AEV) Excellance, Inc. Hall -Mark Fire Apparatus, Inc. (Horton) Pierce Manufacturing, Inc. (Medtec) Quality Emergency Vehicles Sales & Service, Inc. (Osage) Road Rescue Emergency Vehicles Stat-Line Industries (McCoy Miller) Wheeled Coach Industries, Inc. ETR, L.L.C. (AEV) Excellance, Inc. Hall -Mark Fire Apparatus, Inc. (Horton) Base Unit Price Ford XL E-350 $ 1229409.00 Ford XL E-350 $ 86,104.00 Ford XL E-350 $ 91, 275.00 Ford XL E-350 $ 98, 500.00 Ford XL E-350 $ 91, 217.00 Ford XL E-350 $ 99,200.00 Ford XL E-450 $ 119, 856.00 Ford XL E-450 $ 98, 882.00 Ford XL E-450 $ 113,006.00 Ford XL E-450 $ 146, 784.00 Ford XL E-450 $ 95, 850.00 Ford XL E-450 $ 112, 675.00 Ford XL E-450 $ 112, 500.00 Ford XL E-450 $ 103, 556.00 Ford XL E-450 $ 105,000.00 Chevy G3500 $ 113, 572.00 Chevy G3500 $ 98, 672.00 Chevy G3500 $ 121, 382.00 Chevy G3500 $ 130, 520.00 Chevy G3500 $ 98, 716.00 Chevy G3500 $ 999,215.00 Chevy G3500 $ 104, 500.00 Chevy G3500 $ 1029415.00 Chevy G3500 $ 1069000.00 Chevy G4500 $ 140, 531.00 Chevy G4500 $ 112, 365.00 Chevy G4500 $ 124, 339.00 Chevy G4500 $ 1569194.00 Chevy G4500 $ 1089156.00 Chevy G4500 $ 120, 775.00 Chevy G4500 $ 121, 500.00 Chevy G4500 $ 109, 634.00 Chevy G4500 $ 111, 400.00 GMC G3500 $ 989672.00 GMC G3500 $ 121,382.00 GMC G3500 $ 130,520.00 TR 12558- Exhibit D Name of Manufacturer Type Vehicle SPECIFICATION # 44 - TYPE III AMBULANCE R x 2) (cont'd) Pierce Manufacturing, Inc. (Medtec) Quality Emergency Vehicles Sales & Service, Inc. (Osage) Road Rescue Emergency Vehicles ETR, L.L.C. (AEV) Excellance, Inc. Hall -Mark Fire Apparatus, Inc. (Horton) Pierce Manufacturing, Inc. (Medtec) Quality Emergency Vehicles Sales & Service, Inc. (Osage) Road Rescue Emergency Vehicles ETR, L.L.C. (AEV) Quality Emergency Vehicles Sales & Service, Inc. (Osage) GMC G3500 Base Unit Price $ 98, 716.00 GMC G3500 $ 99,215.00 GMC G3500 $ 104, 500.00 GMC G4500 $ 1129,365.00 GMC G4500 $ 124, 339.00 GMC G4500 $ 1569194.00 GMC G4500 $ 1089156.00 GMC G4500 $ 120, 775.00 GMC G4500 $ 121, 500.00 Sprinter $ 97, 607.00 Sprinter SPECIFICATION # 45 - 75" MID MOUNTED AERIAL APPARATUS - FORMED STAINLESS STEEL BODY Aluminum Ladder: Sutphen Corporation Sutphen SL75 SPECIFICATION # 06 - 75" REAR MOUNTED AERIAL APPARATUS - EXTRUDED ALUMINUM BODY Aluminum Ladder: Hall -Mark Fire Apparatus, Inc. (E-ONE) Steel Ladder: Crimson Fire, LLC (Public Safety Solutions Group) Ferrara Fire Apparatus, Inc. Ferrara Fire Apparatus, Inc. Rosenbauer South Dakota, LLC E-ONE HP 75 Crimson 75RMA Igniter XD Intruder Spartan Metro Star 75' SPECIFICATION #06 - 75' REAR MOUNTED AERIAL APPARATUS - FORMED ALUMINUM BODY Aluminum Ladder: Pierce Manufacturing, Inc. Steel Ladder: Pierce Impel 75' HDL $ 1129925.00 $ 650, 727.00 $ 5199797.00 $ 5659033.00 $ 551, 566.00 $ 499, 648.00 $ 510,188.00 $ 555, 691.00 American LaFrance, LLC American LaFrance 75RML $ 581, 901.00 TR 12558- Exhibit D Name of Manufacturer Type Vehicle SPECIFICATION # 06 - 75' REAR MOUNTED AERIAL APPARATUS - FORMED ALUMINUM BODY (cont'd) Steel Ladder: Crimson Fire, LLC (Public. Safety Solutions Group) Kovatch Mobile Equip. Corp. (KME Fire Apparatus) Pierce Manufacturing, Inc. Rosenbauer South Dakota, LLC Base Unit Price Crimson 75RMA $ 546, 291.00 KME Predator AerialCat FL0675 $ 5879390.00 Pierce Impel 75' HDL $ 5559141.00 Spartan Metro Star 75' $ 499,929.00 SPECIFICATION # 06 - 75' REAR MOUNTED AERIAL APPARATUS - FORMED STAINLESS STEEL BODY Steel Ladder: American LaFrance, LLC American LaFrance 75RML $ 584, 987.00 Crimson Fire, LLC (Public Safety Solutions Group) Crimson 75RMA $ 5720135.00 SPECIFICATION # 07 - 100' MID MOUNTED AERIAL APPARATUS - EXTRUDED ALUMINUM BODY Steel Ladder: Ferrara Fire Apparatus, Inc. Igniter XD $ 755, 677.00 Ferrara Fire Apparatus, Inc. Spectr $ 733 9191. 00 SPECIFICATION # 07 - 100' MID MOUNTED AERIAL APPARATUS - FORMED ALUMINUM BODY Steel Ladder: Kovatch Mobile Equip. Corp. (KME Fire Apparatus) KME Predator AerialCat FL07100 $ Pierce Manufacturing, Inc. Pierce Arrow XT HDL $ SPECIFICATION # 07 - 100' MID MOUNTED AERIAL APPARATUS - FORMED STAINLESS STEEL BODY Aluminum Ladder: Sutphen Corporation Sutphen SL 100 $ SPECIFICATION # 08 - 100' REAR MOUNTED AERIAL APPARATUS - EXTRUDED ALUMINUM BODY Aluminum Ladder: Hall -Mark Fire Apparatus, Inc. (E-ONE) E-ONE HP 100L $ 800, 204.00 753, 201.00 744, 560.00 6939366.00 TR 12558- Exhibit D Name of Manufacturer CATION #08 — Type Vehicle r * ZA J) ce EXTRUDED ALUMINUM BODY (cont'd) Steel Ladder: Crimson Fire, LLC (Public Safety Solutions Group) Ferrara Fire Apparatus, Inc. Ferrara Fire Apparatus, Inc. Rosenbauer South Dakota, LLC FORMED ALUMINUM BODY Aluminum Ladder: Pierce Manufacturing, Inc. Steel Ladder: American LaFrance, LLC Kovatch Mobile Equip. Corp. (KME Fire Apparatus) Pierce Manufacturing, Inc. Rosenbauer South Dakota, LLC #08 — 1009 Base Unit Price Crimson 10ORMA $ 674,072.00 Igniter XD $ 6629036.00 Spectr $ 631, 376.00 Spartan Gladiator 100' $ 6529394.00 Pierce Arrow XT HDL American LaFrance 100RMA $ 665,648.00 $ 7509442.00 KME Predator AerialCat FL08103 $ 667,180.00 Pierce Arrow XT HDL $ 653, 206.00 Spartan Gladiator 100' $ 620,852.00 FORMED STAINLESS STEEL BODY Aluminum Ladder: Pierce Manufacturing, Inc. Steel Ladder: American LaFrance, LLC Crimson Fire, LLC (Public Safety Solutions Group) %TION ; - MID EXTRUDED ALUMINUM BODY Aluminum Ladder: Hall -Mark Fire Apparatus, Inc. (E-ONE) Steel Ladder: Crimson Fire, LLC (Public Safety Solutions Group) Ferrara Fire Apparatus, Inc. Ferrara Fire Apparatus, Inc. Rosenbauer South Dakota, LLC Pierce Arrow XT HAL-SS American LaFrance 100RMA Crimson 10ORMA E-ONE HP 95 MM Crimson MM 100' Igniter XD Spectr Spartan Gladiator $ 673, 564.00 $ 753,942.00 $ 6779950.00 $ 849, 613.00 $ 854, 583.00 $ 868, 463.00 $ 8449351.00 $ 798, 554.00 TR 12558- Exhibit D Name of Manufacturer IFI #09 - FORMED ALUMINUM BODY Steel Ladder: American LaFrance, LLC Kovatch Mobile Equip. Corp. (KME Fire Apparatus) Pierce Manufacturing, Inc. Rosenbauer South Dakota, LLC Type Vehicle American LaFrance 100MMP Base Unit Price $ 886, 602.00 KME Predator AerialCat FL09100 $ 8309497.00 Pierce Arrow XT Mid Mount $ 894, 531.00 Spartan Gladiator $ 780, 512.00 FORMED STAINLESS STEEL BODY Aluminum Ladder: Sutphen Corporation Sutphen Corporation Steel Ladder: American LaFrance, LLC Crimson Fire, LLC (Public Safety Solutions Group) kTION # 10 - EXTRUDED ALUMINUM BODY Aluminum Ladder: Hall -Mark Fire Apparatus, Inc. (E-ONE) Steel Ladder: Crimson Fire, LLC (Public Safety Solutions Group) Ferrara Fire Apparatus, Inc. Ferrara Fire Apparatus, Inc. Rosenbauer South Dakota, LLC FORMED ALUMINUM BODY Aluminum Ladder: Pierce Manufacturing, Inc. Steel Ladder: American LaFrance, LLC Kovatch Mobile Equip. Corp. (KME Fire Apparatus) Pierce Manufacturing, Inc. Rosenbauer South Dakota, LLC SPH 100 SP 110 American LaFrance 100MMP Crimson MM 100' (01 U_kq)m E-ONE HP 100P Crimson Star RM 100' Igniter XD Spectr Spartan Gladiator Ot� Pierce Arrow XT Rear Mount PAP $ 9699128.00 $1,0149357.00 $ 891, 503.00 $ 858, 330.00 $ 820,298.00 $ 756, 389.00 $ 763, 430.00 $ 729,318.00 $ 734, 810.00 $ 850, 581.00 American LaFrance 10ORMP $ 788,974.00 KME Predator AerialCat FLO 10102 $ 791, 297.00 Pierce Arrow XT Rear Mount PAP $ 7999259.00 Spartan Gladiator $ 7109125.00 TR 12558- Exhibit D Base Name of Manufacturer Type Vehicle Unit Price SPECIFICATION # 10 — REAR MOUNTED AERIAL PLATFORM — FORMED STAINLESS STEEL BODY Steel Ladder: American LaFrance, LLC American LaFrance 10oRMP $ 792, 399.00 Crimson Fire, LLC (Public Safety Solutions Group) Crimson Star RM 100' $ 760, 631.00 SPECIFICATION # 11 — MEDIUM DUTY RESCUE APPARATUS — EXTRUDED ALUMINUMI BODY (4X2) Freightliner M2-106: Crimson Fire, LLC (Public Safety Solutions Group) Ferrara Fire Apparatus, Inc. Hall -Mark Fire Apparatus, Inc. (E-ONE) Rosenbauer South Dakota, LLC Wheeled Coach Industries, Inc. International Durastar: Crimson Fire, LLC (Public Safety Solutions Group) Ferrara Fire Apparatus, Inc. Hall -Mark Fire Apparatus, Inc. (E-ONE) Rosenbauer South Dakota, LLC Wheeled Coach Industries, Inc. Crimson Star MR $ 158, 867.00 FFA 108 MDR Rescue $ 163, 914.00 E-ONE REHN $ 155, 999.00 FSA Rescue 11 $ 178, 200.00 Rescue Force FLS 11 FTLNR $ 157, 500.00 Crimson Star MR $ 162, 549.00 FFA 108 MDR Rescue $ 162, 379.00 E-ONE REHN $ 160, 899.00 FSA Rescue 11 $ 179, 018.00 Rescue Force FLS 11 INTL $ 167, 500.00 SPECIFICATION # 11 — MEDIUM DUTY RESCUE APPARATUS — FORMED ALUMINUM BODY (4X2) Freightliner M2-106: American LaFrance, LLC Kovatch Mobile Equip. Corp. (KME Fire Apparatus) Pierce Manufacturing, Inc. Rosenbauer South Dakota, LLC Toyne, Inc. (Southeastern Apparatus Sales, LLC) International Durastar: American LaFrance, LLC Kovatch Mobile Equip. Corp. (KME Fire Apparatus) Pierce Manufacturing, Inc. Rosenbauer South Dakota, LLC Sutphen Corporation Toyne, Inc. (Southeastern Apparatus Sales, LLC) American LaFrance 16' W/AR $ 1709316.00 KME FL 11 MDR $ 169, 404.00 Pierce MDR $ 165,411.00 FSA Rescue 11 $ 154, 442.00 Toyne Medium Rescue $ 198, 600.00 American LaFrance 16' W/AR $ 176, 390.00 KME FLI IMDR $ 1659607.00 Pierce MDR $ 1749065.00 FSA Rescue 11 $ 155,259.00 Sutphen CR Series Rescue $ 258,980.00 Toyne Medium Rescue $ 204, 300.00 TR 12558- Exhibit D Name of Manufacturer #12- Extruded Aluminum Body: Crimson Fire, LLC (Public Safety Solutions Group) Ferrara Fire Apparatus, Inc. Ferrara Fire Apparatus, Inc. Hall -Mark Fire Apparatus, Inc. (E-ONE) Rosenbauer South Dakota, LLC Formed Aluminum Body: American LaFra.nce, LLC Kovatch Mobile Equip. Corp. (KME Fire Apparatus) Pierce Manufacturing, Inc. Rosenbauer South Dakota, LLC Sutphen Corporation Toyne, Inc. (Southeastern Apparatus Sales, LLC) ON#13-2 Freightliner M2-106: Crimson Fire, LLC (Public Safety Solutions Group) Ferrara Fire Apparatus, Inc. Hall -Mark Fire Apparatus, Inc. (E-ONE) International Workstar: Crimson Fire, LLC (Public Safety Solutions Group) Ferrara Fire Apparatus, Inc. Hall -Mark Fire Apparatus, Inc. (E-ONE) Freightliner M2-106: American LaFrance, LLC Kovatch Mobile Equip. Corp. (KME Fire Apparatus) Pierce Manufacturing, Inc. Rosenbauer South Dakota, LLC Type Vehicle Base Unlit Price Crimson Star HR $ 237, 303.00 Igniter XD XMFD $ 271, 243.00 Intruder MFDXL $ 2359984.00 E-ONE REHN Typhoon $ 2449925.00 Spartan Force $ 247, 658.00 American LaFrance 18' W/ACR $ 273,887.00 KME Predator FL 12HDR $ 267, 534.00 Pierce Saber HDR $ 272, 561.00 Spartan Force $ 229, 727.00 Sutphen R Series $ 355, 247.00 Spartan Heavy Rescue M 0� $ 2 74 9 000.00 Crimson Star Tanker $ 2129,368.00 FFA T2 500 Tanker $ 249, 330.00 E-ONE 1TSA $ 207, 330.00 Crimson Star Tanker $ 211, 764.00 FFA T2500 Tanker $ 2479484.00 E-ONE TTSA r7 American La.France T/A Tanker Y $ 2109,127.00 $ 2559828.00 KME Flatback FL 132500 $ 2369125.00 Pierce Contender Series $ 2069391.00 FSA Tanker 13 $ 203,365.00 Toyne, Inc. (Southeastern A aratus Sales, LLC) Toyne FFCSA-2500 $ 2339500.00 PP TR 12558- Exhibit D Name of Manufacturer N#13— (cont'd) International Workstar: American LaFrance, LLC Kovatch Mobile Equip. Corp. (KME Fire Apparatus) Pierce Manufacturing, Inc. Rosenbauer South Dakota, LLC Toyne, Inc. (Southeastern Apparatus Sales, LLC) #13- Freightliner M2-106: Kovatch Mobile Equip. Corp. (KME Fire Apparatus) International Workstar: Kovatch Mobile Equip. Corp. (KME Fire Apparatus) Freightliner M2-106: Crimson Fire, LLC (Public Safety Solutions Group) Kovatch Mobile Equip. Corp. (KME Fire Apparatus) Toyne, Inc. (Southeastern Apparatus Sales, LLC) Type Vehicle American LaFrance T/A Tanker KME Flatback FL132500 Pierce Contender Series FSA Tanker 13 Toyne FFCSA-2500 D GALv International Workstar: Crimson Fire, LLC (Public Safety Solutions Group) Kovatch Mobile Equip. Corp. (KME Fire Apparatus) Sutphen Corporation Toyne, Inc. (Southeastern Apparatus Sales, LLC) N#14— Ford F-550: American LaFrance, LLC Ferrara Fire Apparatus, Inc. AT EL KME Flatback FL132500- KME Flatback FL132500 I GALLON MOBILE WATER D STAINLESS STEEL BODY Crimson Star Tanker KME Flatback FL132500 Toyne FFCSA-2500 Crimson Star Tanker (0T EA Base Unit Price $ 2809281.00 $ 231, 803.00 $ 211959 8.00 $ 207 9103. 00 $ 237,250.00 $ 2279000.00 $ 222, 681.00 $ 2179103.00 $ 2439952.00 $ 240, 200.00 $ 214,970.00 KME Flatback FL132500 $ 23%636.00 Sutphen CTS-2500 Tanker $ 2839629.00 Toyne FFCSA- 2 500 $ 2469500.00 Wildland Brush $ 859970.00 Wildland Brush $ 99, 060.00 TR 12558- Exhibit D Name of Manufacturer 'ION # 14 — (cont'd) Ford F-550: Hall -Mark Fire Apparatus, Inc. (E-ONE) Kovatch Mobile Equip. Corp. (KME Fire Apparatus) Pierce Manufacturing, Inc. Toyne, Inc. (Southeastern Apparatus Sales, LLC) Dodge Ram 5500: American LaFrance, LLC Ferrara Fire Apparatus, Inc. Hall -Mark Fire Apparatus, Inc. (E-ONE) Kovatch Mobile Equip. Corp. (KME Fire Apparatus) International Durastar 430OM7: American LaFrance, LLC Kovatch Mobile Equip. Corp. (KME Fire Apparatus) Toyne, Inc. (Southeastern Apparatus Sales, LLC) #15- Type Vehicle APPA Base Unit Price Wildland $ 84, 586.00 KME Wildland FL 14WFA $ 100, 597.00 Pierce F550 Wildland $ 88, 067.00 Wildland . Brush $ 93, 300.00 Wildland Brush $ 89, 020.00 Wildland Brush $ 102, 589.00 Wildland $ 85, 661.00 KME Wildland FL 14WFA $ 100, 071.00 Wildland Brush $ 95, 594.00 KME Wildland FL 14WFA $ 131, 480.00 Wildland Brush $ 134, 700.00 EXTRUDED ALUMINUM BODY (2 Doorl Freightliner M2: Crimson Fire, LLC (Public Safety Solutions Group) Ferrara Fire Apparatus, Inc. Hall -Mark Fire Apparatus, Inc. (E-ONE) Rosenbauer South Dakota, LLC International Durastar: Crimson Fire, LLC (Public Safety Solutions Group) Ferrara Fire Apparatus, Inc. Hall -Mark Fire Apparatus, Inc. (E-ONE) Rosenbauer South Dakota, LLC Sutphen Corporation Crimson Star Pumper $ 1989057.00 FFA RP751 Pumper $ 208, 373.00 E-ONE TDPM $ 170, 517.00 FSA Pumper 13 $ 208, 768.00 Crimson Star Pumper $ 1979690.00 FFA RP751 Pumper $ 206, 838.00 E-ONE TDPM FSA Pumper 13 Sutphen C 1 Pumper $ 1769125.00 $ 2109876.00 $ 216, 792.00 TR 12558- Exhibit D Name of Manufacturer Type Vehicle SPECIFICATION # 15 - COMMERCIAL PUMPER - FORMED ALUMINUM BODY (2 Doors Freightliner M2: American LaFrance, LLC Crimson Fire, LLC (Public Safety Solutions Group) Kovatch Mobile Equip. Corp. (KME Fire Apparatus) Pierce Manufacturing, Inc. Rosenbauer South Dakota, LLC Toyne, Inc. (Southeastern Apparatus Sales, LLC) International Durastar: American LaFrance, LLC Crimson Fire, LLC (Public Safety Solutions Group) Kovatch Mobile Equip. Corp. (KME Fire Apparatus) Pierce Manufacturing, Inc. Rosenbauer South Dakota, LLC Toyne, Inc. (Southeastern Apparatus Sales, LLC) American LaFrance S/M Pumper Crimson Star Pumper KME Challenger FL 15COML Pierce Contender Series FSA Pumper 13 Toyne FFCSA Pumper American LaFrance S/M Pumper Crimson Star Pumper KME Challenger FL 15COML Pierce Contender Series FSA Pumper 13 Toyne FFCSA Pumper SPECIFICATION # 15 -COMMERCIAL PUMPER - FORMED GALVANNEAL STEEL BODY (2 Door) Freightliner M2: Kovatch Mobile Equip. Corp. (KME Fire Apparatus) International Durastar: Kovatch Mobile Equip. Corp. (KME Fire Apparatus) KME Challenger FL 15COML KME Challenger FL 15COML SPECIFICATION # 15 - COMMERCIAL PUMPER - FORMED STAINLESS STEEL BODY (2 Door) Freightliner M2: American LaFrance, LLC Crimson Fire, LLC (Public Safety Solutions Group) Hall -Mark Fire Apparatus, Inc. (E-ONE) Kovatch Mobile Equip. Corp. (KME Fire Apparatus) Toyne, Inc. (Southeastern Apparatus Sales, LLC) American LaFrance S/M Pumper Crimson Star Pumper E-ONE PSTS KME Challenger FL 15COML Toyne FFCSA Pumper Base Unit Price $ 212, 670.00 $ 188, 773.00 $ 1999783.00 $ 179, 598.00 $ 1829408.00 $ 208, 000.00 $ 222, 246.00 $ 188,817.00 $ 197, 654.00 $ 184, 671.00 $ 184,516.00 $ 2139500.00 $ 1959172.00 $ 192,712.00 $ 213, 763.00 $ 200, 801.00 $ 1999,325.00 $ 204, 530.00 $ 2129000.00 TR 12558- Exhibit D Name of Manufacturer Type Vehicle SPECIFICATION # 15 - COMMERCIAL PUMPER - FORMED STAINLESS STEEL BODY (2 Door) (cont'd) International Durastar: American LaFrance, LLC Crimson Fire, LLC (Public Safety Solutions Group) Hall -Mark Fire Apparatus, Inc. (E-ONE) Kovatch Mobile Equip. Corp. (KME Fire Apparatus) Toyne, Inc. (Southeastern Apparatus Sales, LLC) Base Unit Price American LaFrance S/M Pumper $ 223, 902.00 Crimson Star Pumper $ 202, 899.00 E-ONE PSTS $ 205, 237.00 KME Challenger FL 15COML $ 2020043.00 Toyne FFCSA Pumper $ 217, 500.00 SPECIFICATION # 16 - LEVEL I CUSTOM PUMPER - CUSTOM CHASSIS Extruded Aluminum Body: Hall -Mark Fire Apparatus, Inc. (E-ONE) Sutphen Corporation Formed Aluminum Body: Kovatch Mobile Equip. Corp. (KME Fire Apparatus) Pierce Manufacturing, Inc. Sutphen Corporation Formed Galvanneal Steel Body: Kovatch Mobile Equip. Corp. (KME Fire Apparatus) Pierce Manufacturing, Inc. Formed Stainless Steel Body: Hall -Mark Fire Apparatus, Inc. (E-ONE) Kovatch Mobile Equip. Corp. (KME Fire Apparatus) Pierce Manufacturing, Inc. E-ONE Typhoon Pumper $ 267, 508.00 S-Series Custom $ 3089970.00 KME Challenger FL 16LVL 1 $ 273, 541.00 Pierce Saber Series $ 269, 266.00 S-Series Custom $ 290s993.00 KME Challenger FL 16LVL 1 $ 268, 943.00 Pierce Velocity SLT Series $ 337, 573.00 E-ONE Typhoon Pumper $ 271, 734.00 KME Challenger FL 16LVL l $ 278, 274.00 Pierce Impel SS Series $ 308, 890.00 SPECIFICATION # 16 - LEVEL I CUSTOM PUMPER - SPARTAN CHASSIS Extruded Aluminum Body: Crimson Fire, LLC (Public Safety Solutions Group) Rosenbauer South Dakota, LLC Formed Aluminum Body: Crimson Fire, LLC (Public Safety Solutions Group) Crimson Metro Star Pumper L 1 Spartan Force 16 Crimson Metro Star Pumper L 1 $ 269, 507.00 $ 272, 842.00 $ 260, 656.00 TR 12558- Exhibit D Name of Manufacturer Type Vehicle Base Unit Price SPECIFICATION # 16 - LEVEL I CUSTOM PUMPER - SPARTAN CHASSIS (conVd) Formed Aluminum Body: Rosenbauer South Dakota, LLC Toyne, Inc. (Southeastern Apparatus Sales, LLC) Formed Stainless Steel Body: Crimson Fire, LLC (Public Safety Solutions Group) Toyne, Inc. (Southeastern Apparatus Sales, LLC) Spartan Force 16 Toyne Spartan Metro Star FFCSA Crimson Metro Star Pumper L 1 Toyne Spartan Metro Star FFCSA SPECIFICATION # 16 - LEVEL I CUSTOM PUMPER - HME CHASSIS Extruded Aluminum Body: Ferrara Fire Apparatus, Inc. Formed Aluminum Body: Toyne, Inc. (Southeastern Apparatus Sales, LLC) Formed Stainless Steel Body: Toyne, Inc. (Southeastern Apparatus Sales, LLC) Intruder Toyne 1871W FFCSA Toyne 1871W FFCSA SPECIFICATION # 16 - LEVEL I CUSTOM PUMPER - AMERICAN LAFRANCE CHASSIS Formed Aluminum Body: American LaFrance, LLC Formed Stainless Steel Body: American LaFrance, LLC American LaFrance Custom S/M Pumper American LaFrance Custom S/M Pumper $ 2489128.00 $ 286,000.00 $ 272,159.00 $ 290,250.00 $ 277,618.00 $ 293, 500.00 $ 297, 500.00 $ 300, 634.00 $ 301, 992.00 SPECIFICATION # 17 - LEVEL II CUSTOM PUMPER - CUSTOM CHASSIS Extruded Aluminum Body: Ferrara Fire Apparatus, Inc. Hall -Mark Fire Apparatus, Inc. (E-ONE) Rosenbauer South Dakota, LLC Sutphen Corporation Formed Aluminum Body: Kovatch Mobile Equip. Corp. (KME Fire Apparatus) Igniter XD LFD $ 3991,874.00 E-ONE Cyclone Pumper $ 373,084.00 Commander FSA 17 $ 364, 916.00 Monarch Series Custom $ 4219112.00 KME Flatback FL 17LVL2 $ 3579181.00 TR 12558- Exhibit D Name of Manufacturer Type Vehicle Base Unit Price SPECIFICATION # 17 - LEVEL II CUSTOM PUMPER - CUSTOM CHASSIS (cont'd) Formed Aluminum Body: Pierce Manufacturing, Inc. Rosenbauer South Dakota, LLC Formed Galvanneal Steel Body: Kovatch Mobile Equip. Corp. (KME Fire Apparatus) Pierce Manufacturing, Inc. Formed Stainless Steel Body: Hall -Mark Fire Apparatus, Inc. (E-ONE) Kovatch Mobile Equip. Corp. (KME Fire Apparatus) Pierce Manufacturing, Inc. Pierce Arrow XT Series $ 387, 678.00 Commander FSA 17 $ 340, 030.00 KME Flatback FL 17LVL2 $ 352, 582.00 Pierce Quantum Series $ 3959482.00 E-ONE Cyclone Pumper $ 3949,151.00 KME Flatback FL 17LVL2 $ 361, 913.00 Pierce Velocity Series $ 3999974.00 SPECIFICATION # 17 - LEVEL II CUSTOM PUMPER - SPARTAN CHASSIS Extruded Aluminum Body: Crimson Fire, LLC (Public Safety Solutions Group) Rosenbauer South Dakota, LLC Formed Aluminum Body: Crimson Fire, LLC (Public Safety Solutions Group) Rosenbauer South Dakota, LLC Toyne, Inc. (Southeastern Apparatus Sales, LLC) Formed Stainless Steel Body: Crimson Fire, LLC (Public Safety Solutions Group) Toyne, Inc. (Southeastern Apparatus Sales, LLC) Crimson Metro Star Pumper L2 Spartan Gladiator 17 Crimson Metro Star Pumper L2 Spartan Gladiator 17 Toyne Spartan Gladiator Crimson Metro Star Pumper L2 Toyne Spartan Gladiator SPECIFICATION # 17 - LEVEL II CUSTOM PUMPER - HME CHASSIS Extruded Aluminum Body: Ferrara Fire Apparatus, Inc. Formed Aluminum Body: Toyne, Inc. (Southeastern Apparatus Sales, LLC) Formed Stainless Steel Body: Toyne, Inc. (Southeastern Apparatus Sales, LLC) Spectr LFD Toyne Spectr Toyne Spectr $ 366, 042.00 $ 373, 656.00 $ 341, 02 5.00 $ 346, 660.00 $ 377,000.00 $ 3689450.00 $ 381, 000.00 $ 386, 017.00 $ 379, 000.00 $ 383, 000.00 TR 12558- Exhibit D Name of Manufacturer Type Vehicle SPECIFICATION # 17 - LEVEL II CUSTOM PUMPER - AMERICAN LAFRANCE CHASSIS Formed Aluminum Body: American LaFrance, LLC Formed Stainless Steel Body: American LaFrance, LLC American LaFrance Custom Rescue Pumper American LaFrance Custom Rescue Pumper Base Unit Price $ 354,804.00 $ 3569162.00 TR 12558- Exhibit D rali.11-4 1 1 MANUFACTURERS/DEALERS American LaFrance LLC 1090 Newton Way Summerville, SC 29483-7430 Contact: Kevin Hyde Phone: 843-486-7510 Cell: 843-789-9809 Fax: 843-486-7580 Email: kevinhyde@americanlafrance.com Braun Industries, Inc. 1170 Production Drive Van Wert, OH 45891 Contact: Penny Richardson Phone: 419-232-7020 Cell: Fax: 419-232-7070 Email: pennyr@braunambulances.com Crimson Fire, Inc. ('Public Safety Solutions Group) 2525 Clarcona Road Apopka, FL 32703 Contact: James Schwaller Phone: 407-798-0004 Cell: 352-427-6605 Fag: 407-798-0013 Email: jschwaller@epofc.com ETR, L.L.C. (AEV - American Emergency Vehicles) 920 Britt Court, Suite #252 Altamonte Springs, FL 32701 Contact: Jerry Michaluk Phone: 407-339-6737 Cell: 407-701-0700 Fag: 407-339-8198 Email: jerry@etrllc.org Excellance, Inc. 453 Lanier Road Madison, AL 35758 Contact: Thomas R. Pugh Phone: 800-882-9799 Cell: 256-468-6007 Fax: 256-772-8792 Email: tommy@excellance.com Ferrara Fire Apparatus, Inc. 27855 James Chapel Road Holden, LA 70744 Contact: Dave Carlton Phone: 800-443-9006 Cell: 225-202-3287 Fax: 225-567-7680 Email: davec@ferrarafire.com Hall -Mark Fire Apparatus (E.-ONE & Horton) 3431 N.W. 27th Ave. Ocala, FL 34475 Contact: Ed Martin Phone: 352-629-6305 Cell: 352-266-4422 Fax: 352-629-3471 Email: emartin@haH-markfire.com Kovatch Mobile Equipment Corp. (AM Fire Apparatus) 1 Industrial Complex Nesquehoning, PA 18240 Contact: Philip Gerace Phone: 570-669-5174 Cell: 570-233-1452 Fax: 570-669-5124 Email: pgerace@kovatch.com Pierce Manufacturing, Inc. (Ten-8 Fire Equipment, Inc.) 2904 59th Ave. Drive East Bradenton, FL 34208 Contact: Mark Jones Phone: 800-228-8368 Cell: 941-704-6244 Fag: 941-756-7779 Email: mjones@ten8fire.com Quality Emergency Vehicles Sales & Service, Inc. 123 N. Orchard Street, Suite 1-B Ormond Beach, FL 32174 Contact: Fred Allegretti Phone: 386-254-4911 Cell: 386-547-8089 Fax: 386-254-4933 Email: ambulancesales@aol.com TR 12558- Exhibit D AWARDED MANUFACTURERS/DEALERS (continued) Road Rescue Emergency Vehicles ('The Phoenix Group) 1323 Shelter Rock Road Orlando, FL 32835 Contact: Gary Goetsch Phone: 321-217-3201 Cell: 321-217-3201 Fax: 407-532-1880 Email: hotbirrd11@aol.com Rosenbauer South Dakota, LLC (EVS Firefighting Technologies) 4661 Johnson Road, Suite 1 Coconut Creek, FL 33073 Contact: Robert Windesheim Paul Stephenson Phone: 954-428-5201 Cell: 954-734-3549 Fag: 954-428-5202 Email: rwindesheim@ 1 evs. com pstephenson@evsfire.com Stat-Line Industries (McCoy Miller) 2050 Haines Street Jacksonville, FL 32206 Contact: Allan Assaf Phone: 904-356-6543 Cell: 904-343-2822 Fax: 904-356-0841 Email: mail@stat-line.com Sutphen Corporation 10140 Bellavista Circle Unit 1104 Miromar Lakes, FL 33913 Contact: David Stonitsch Phone: 239-267-5300 Cell: 239-357-8530 Fax: 239-590-9246 Email: dstonitsch@hotmail.com Toyne, Inc. (Southeastern Apparatus Sales, LRLC) 106 Corte Del Rosa Venice, FL 34285 Contact: John Lovell Phone: 256-362-9280 Cell: 205-541-1980 Fax: 256-362-9280 Email: johnOseapparatus.com mr-apparatus@yahoo.com Wheeled Coach Industries, Inc. 2737 N. Forsyth Road Winter Park, FL 32792 Contact: Art Sprague Phone: 407-677-7777 x369 Cell: 407-718-1240 Fax: 800-513-8174 Email: art. sprague@wheeledcoach.com TR 12558- Exhibit D BASIC INFORMATION REQUIRED ON A VEHICLE PURCHASE ORDER When filling out a purchase order for a vehicle that is to be purchased under the Florida Fire Chiefs' Association, Florida Sheriffs Association & Florida Association of Counties Bid No. 11-10-1202, there are certain items of information that must be on the purchase order, or enclosed with the purchase order, so as to minimize the possibility of errors on the order. This information includes, but is not limited to, the following: • Date of order • Purchase order number • Originator of purchase order • Name and number (phone & fax) of contact person responsible for receiving "Confirmation of Order" and scheduling of delivery • Delivery date required • Contract number (11-10-1202) • Contract specification number of vehicle(s), number of vehicles ordered and base price of vehicles • Type vehicle ordered (i.e. Type I Ambulance, Ford X,T F-450, 4x4) • FIN CODE for the Florida Sheriffs Association (QE065) and your agency's FIN CODE when ordering FORD products • FAN CODE for the Florida Sheriffs Association (917872) and your agency's FAN CODE when ordering GENERAL MOTORS products • FAN CODE for the Florida Sheriffs Association (49313) and your agency's FAN CODE when ordering CHRYSLER products Inclusion of the above mentioned items will help prevent possible misunderstanding of the order and will assist in any audit of the purchase orders, or vehicles, that may be deemed necessary in the future. TR 12558- Exhibit D FLORIDA IS u T S .S.J i.IXkS. N COUNTIES All About :Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES Base Specifications N#O1- 2 WHEEL DRIVE (DUAL REAR WHEEL, CAB 8c CHASSIS) ALL ITEMS FACTORY INSTALLED UNLESS OTHERWISE INDICATED FORD, GENERAL MOTORS, DODGE OR APPROVED EQUIVALENT 1. ENGINE a. Turbo diesel engine, minimum 5.9L displacement. b. Must include the chassis manufacturer's "AMBULANCE PREP PACKAGE". C. Heavy-duty alternator, minimum 200 amp. d. Maintenance free heavy-duty batteries, 750 CCA minimum. e. Manufacturer's heavy-duty engine cooling. 2. TRANSMISSION a. Automatic transmission, 4 speed minimum with overdrive. b. Manufacturer's heavy-duty cooling. 3. AXLES a. Manufacturer's standard drive axle ratio for ambulance prep. 4. PERFORMANCE ITEMS a. Power steering b. Anti -lock brakes C. Power brakes, disc type front, disc or drum rear. d. Fuel capacity, 250 miles minimum without refueling e. Heavy-duty front and rear shocks. f. Front stabilizer bar. TR 12558- Exhibit D Base Specifications # 01 - Type I Ambulance 5. COMFORT ITEMS a. Factory installed air conditioning b. Tinted glass (factory tint) C. Minimum seating for two d. Rubber floor mat instead of .carpeting e. AM/FM radio f. Power door locks g. Power windows h. Speed control and tilt wheel. 6. SAFETY ITEMS a. Driver and passenger lap and shoulder belt with retractor. b. Driver and passenger air bags C. Dual electric horns d. Outside mirrors to provide vision for vehicles 96" wide. e. Two speed wipers with intermittent. f. Interior dome lights wired to right and left doors. 7. TIRES AND WHEELS a. BSW, all season tread radial 16 inch tires. b. Conventional spare tire and wheel C. Jack and wheel wrench 8. CHASSIS. FRAME, CAB a. Minimum GVWR 11,400 lbs. b. Cab and chassis only C. Cab to center of axle 84 inches 9. MODULAR BODY CONSTRUCTION a. The ambulance body and patient compartment shall be sufficient in size to meet the requirements of this specification and those of paragraph 3.10.1 of the current KKK-A-1822F. TR 12558- Exhibit D FLORIDA ASSOCJAJION. OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 FORD RLT F-350 Specification #0 1 (Type I Ambulance, 4g2) The Ford XLT F-350, 'l)rpe I Ambulance purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. BASE PRICE: MANUFACTURER: EASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: $1179190.00 Braun Industries, Inc. $1.339038.00 Excellance, Inc. $97,987.00 Pierce Manufacturing, Inc. (Medtec) $1059500.00 Road Rescue Emergency Vehicles $1029500.00 Wheeled Coach Industries, Inc. Purchasers are advised that the above referee unit only. The Florida Fire Chiefs' Association, of Counties have identified and equipped the items required to meet KKK-A-1822F, or the i equipment needs and preferences are going options required or changes to the base unit the manufacturer listed. $989029.00 ETR, L.L.C. (AEV) $127, 434.00 Hall -Mark Fire Apparatus (Horton) $1189775.00 Quality Emergency Vehicles (Osage) $951,700.00 Stat-Line Industries (McCoy Miller) :ed vehicle specification comes equipped as a base Florida Sheriffs Association and Florida Association ease unit with those specifications and equipment lost current revision for Type I Ambulance. Since to vary from agency to agency - any additional desired by the purchaser shall be made through NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12558- Exhibit D FLORIDA ASRXIATION OF COUNTIES All About Florida FLO DA FIRE CHIEFS' ASSOCIEITION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 FORD XLT F-450 Specification #O1 (Type I Ambulaace, 4g2) The Ford XLT F-450, lype I Ambulance purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSKs base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: $1419778.00 Braun Industries, Inc. $1.379506.00 Excellance, Inc. $1099127.00 Pierce Manufacturing, Inc. (Medtec) $1329500.00 Road Rescue Emergency Vehicles $114, 368.00 Wheeled Coach Industries, Inc. $1151,854.00 ETR, L.L.C. (AEV) $1609515.00 Hall -Mark Fire Apparatus (Horton) $1149775.00 Quality Emergency Vehicles (Osage) $1131,000.00 Stat-Line Industries (McCoy Miller) Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet KKK-A-1822F, or the most current revision for Type I Ambulance. Since equipment needs and preferences are going to vary from agency to agency - any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12558- Exhibit D FLORIDA :; .. 0 COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 FORD XLT F-550 Specification #01 (Type I Ambulance, 4g2) The Ford XLT F-550, Type I Ambulance purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: $119 9 593. 00 ETR, L.L.C. (AEV) $1119665.00 Pierce Manufacturing, Inc. (Medtec) $116, 259.00 Wheeled Coach Industries, Inc. $1629429.00 Hall -Mark Fire Apparatus (Horton) $1359500.00 Road Rescue Emergency Vehicles Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, of Counties have identified and equipped the items required to meet KKK-A-1822F, or the r equipment needs and preferences are going options required or changes to the base unit the manufacturer listed. Florida Sheriffs Association and Florida Association ease unit with those specifications and equipment lost current revision for Type I Ambulance. Since to vary from agency to agency - any additional desired by the purchaser shall be made through NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12558- Exhibit D FLORIDA �ytgL FOsR.ID�ION gg►. COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 CHEVY SILVERADO 3500 FID Specification #0 1 (Type I Ambulance, 4s2) The Chevy Silverado 3500 HD, Type I Ambulance purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: $989842.00 ETR, L.L.C. (AEV) $1049072.00 Pierce Manufacturing, Inc. (Medtec) $98, 892.00 Stat-Line Industries (McCoy Miller) $123, 936.00 Excellance, Inc. $125, 500.00 Road Rescue Emergency Vehicles $1019600.00 Wheeled Coach Industries, Inc. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet KKK-A-1822F, or the most current revision for Type I Ambulance. Since equipment needs and preferences are going to vary from agency to agency - any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12558- Exhibit D FLORIDA ASS0C1,Vr10N OF' COUNTIES AU About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION 8c FLORIDA ASSOCIATION OF COUNTIES 2012 DODGE RAM 3500 Specification #0 1 (Type I Ambulance, 4g2) The Dodge Ram 3500, Type I Ambulance purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: $123,631.00 Braun Industries, Inc. $1109504.00 Stat-Line Industries (McCoy Miller) $1029500.00 Road Rescue Emergency Vehicles $103 9 500.00 Wheeled Coach Industries, Inc. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet KKK-A-1822F, or the most current revision for Type I Ambulance. Since equipment needs and preferences are going to vary from agency to agency - any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12558- Exhibit D FLORIDAy7 i 1_1Sk \++1 N111()N OF, COUNTIES Aid About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 DODGE RAM 4500 Specification #01 (Type I Ambulance, 4s2) The Dodge Ram 4500, Type I Ambulance purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSKs base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BABE PRICE: MANUFACTURER: $144, 891.00 Braun Industries, Inc. $1429928.00 Excellance, Inc. $112,991.00 Pierce Manufacturing, Inc. (Medtec) $1329500.00 Road Rescue Emergency Vehicles $1159000.00 Wheeled Coach Industries, Inc. $117,485.00 ETR, L.L.C. (AEV) $162, 463.00 Hall -Mark Fire Apparatus (Horton) $122,775.00 Quality Emergency Vehicles (Osage) $117, 530.00 Stat-Line Industries (McCoy Miller) Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet KKK-A-1822F, or the most current revision for Type I Ambulance. Since equipment needs and preferences are going to vary from agency to agency - any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12558- Exhibit D FLORIDA ASSOCIATION OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 DODGE RAM 5500 Specification #01 (Type I Ambulance, 4g2) The Dodge Ram 5500, type I Ambulance purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. BASE PRICE: MANUFACTURER: BABE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: $1219083.00 ETR, L. L. C. (AEV) $1159190.00 Pierce Manufacturing, Inc. (Medtec) $1169450.00 Wheeled Coach Industries, Inc. $1659885.00 Hall -Mark Fire Apparatus (Horton) $13%900.00 Road Rescue Emergency Vehicles Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet KKK-A-1822F, or the most current revision for Type I Ambulance. Since equipment needs and preferences are going to vary from agency to agency - any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12558- Exhibit D FLORIDA S� IA IO OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES Base Specifications #02 - 2 WHEEL DRIVE MEDIUM DUTY (DUAL REAR WHEEL, CAB &CHASSIS) ALL ITEMS FACTORY INSTALLED UNLESS OTHERWISE INDICATED FORD, FREIGHTLINER, INTERNATIONAL OR APPROVED EQUIVALENT 1. ENGINE a. Diesel engine, 6 cylinder minimum. b. Heavy-duty alternator, minimum 250 amp. C. Maintenance free heavy-duty batteries, 750 CCA minimum. d. Manufacturer's heavy-duty engine cooling. 2. TRANSMISSION a. Electronic Allison Transmission b. Manufacturer's transmission oil cooler: water to oil heavy-duty cooling. 3. AXLES a. Front Axle: 7,000 lbs. b. Rear Axle: 12,000 lbs. C. Front Suspension: 7,000 lbs. d. Rear Suspension: 12,000 lbs. air suspension with dual instant response leveling valves. 4. PERFORMANCE ITEMS a. Power Steering b. Anti -lock brakes C. Power brakes, disc type front, disc or drum rear. d. Fuel capacity, 250 miles minimum without refueling e. Heavy-duty front and rear shocks. TR 12558- Exhibit D Base Specifications #02 - Type I Ambulance Medium Duty 5. COMFORT ITEMS a. Factory installed air conditioning b. Tinted glass (factory tint) C. Dual air suspension seats with armrest d. Rubber floor mat instead of carpeting e. AM/FM radio 6. SAFETY ITEMS a. Driver and passenger lap and shoulder belt with retractor. b. Dual electric horns C. Outside mirrors to provide vision for vehicles 96" Wide d. Two speed wipers With intermittent e. Interior dome lights wired to right and left doors. f. Halogen headlights with daytime running feature. 7. TIRES AND WHEELS a. BSW, all season tread radial 19.5 inch tires 8. CHASSIS, FRAME, CAB a. Minimum GVWR 16,500 lbs. b. Cab to center of axle 100 inches minimum 9. MODULAR BODY CONSTRUCTION a. The ambulance body and patient compartment shall be sufficient in size to meet the requirements of this specification and those of paragraph 3.10.1 of the current KKK -A- 1822F. TR 12558- Exhibit D FLORIDA 'ASSOCIA.ITION Of", COUNTIES All About Norida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 FORD F-650 Specification #02 (Type I Ambulance, 4g2 Medium Duty) The Ford F-650, Type I Medium Duty Ambulance purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSNs base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. BASE PRICE: MANUFACTURER: BABE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: $174, 382.00 Braun Industries, Inc. $1.949524.00 Hall -Mark Fire Apparatus (Horton) $158, 500.00 Road Rescue Emergency Vehicles $1469448.00 ETR, L.L.C. (AEV) $156* 641.00 Pierce Manufacturing, Inc. (Medtec) $1349 500.00 Wheeled Coach Industries, Inc. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet KKK-A-1822F, or the most current revision for Type I Ambulance. Since equipment needs and preferences are going to vary from agency to agency - any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12558- Exhibit D FLORIDA ASSOCIATIUN OF COUNTIES AU About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 FREIGHTLINER M2 Specification #02 (Type I Ambulance, 4g2 Medium Duty) The Freightliner M2, Type I Medium Duty Ambulance purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. BASE PRICE: MANUFACTURER: BABE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: $182, 274.00 Braun Industries, Inc. $1639440.00 Excellance, Inc. $1569989.00 Pierce Manufacturing, Inc. (Medtec) $1399500.00 Wheeled Coach Industries, Inc. $147,730.00 ETR, L.L.C. (AEV) $202,153.00 Hall -Mark Fire Apparatus (Horton) $1669500.00 Road Rescue Emergency Vehicles Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet KKK-A-1822F, or the most current revision for Type I Ambulance. Since equipment needs and preferences are going to vary from agency to agency - any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor.. TR 12558- Exhibit D FLORIDA ASSOCIATION cif COUNTIES All About Florida FLORIDA FIRE CHIEFS" ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 INTERNATIONAL TERRASTAR SFA Specification #02 (Type I Ambulance, 4s2 Medium Duty) The International Terrastar SFA, Type I Medium Duty Ambulance purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSKs base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: $1609026.00 Braun Industries, Inc. $147, 066.00 Excellance, Inc. $1459997.00 Pierce Manufacturing, Inc. (Medtec) $1489500.00 Road Rescue Emergency Vehicles $132, 549.00 ETR, L.L.C. (AEV) $1839094.00 Hall -Mark Fire Apparatus (Horton) $139,355.00 Quality Emergency Vehicles (Osage) $128, 500.00 Wheeled Coach Industries, Inc. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet KKK-A-1822F, or the most current revision for Type I Ambulance. Since equipment needs and preferences are going to vary from agency to agency - any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12558- Exhibit D FLORIDA ASSOCINJAUN OF COUNTIES AU About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 INTERNATIONAL DURASTAR 4300M7 Specification #02 (Type I Ambulance, 4g2 Medium Duty) The International Durastar 4300M7, I)rpe I Medium Duty Ambulance purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: $1889352.00 Braun Industries, Inc. $1669163.00 Excellance, Inc. $163, 278.00 Pierce Manufacturing, Inc. (Medtec) $1639 500.00 Road Rescue Emergency Vehicles $1499885.00 ETR, L.L.C. (AEV) $1999992.00 Hall -Mark Fire Apparatus (Horton) $1579350.00 Quality Emergency Vehicles (Osage) $148, 500.00 Wheeled Coach Industries, Inc. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet KKK-A-1822F, or the most current revision for Type I Ambulance. Since equipment needs and preferences are going to vary from agency to agency - any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASS0CL,VF10'N* OF; COUNTIES All About Norida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 INTERNATIONAL DURASTAR 4300LP Specification #02 (Type I ulance, 4g2 Medium Duty) The International Durastar 4300LP, type I Medium Duty Ambulance purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. BASE PRICE: MANUFACTURER: BABE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: $1899086.00 Braun Industries, Inc. $1709091.00 Excellance, Inc. $1679828.00 Pierce Manufacturing, Inc. (Medtec) $1711,500.00 Road Rescue Emergency Vehicles $1589751.00 ETR, L.L.C. (AEV) $2019260.00 Hall -Mark Fire Apparatus (Horton) $1609945.00 Quality Emergency Vehicles (Osage) $1529500.00 Wheeled Coach Industries, Inc. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet KKK-A-1822F, or the most current revision for 'lope I Ambulance. Since equipment needs and preferences are going to vary from agency to agency - any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D :FLORIDA COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 INTERNATIONAL DURA.STAR 4400LP Specification #02 (Type I Ambulance, 4a2 Medium Duty) The International Durastar 4400LP, Type I Medium Duty Ambulance purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: $1969902.00 Braun Industries, Inc. $2029732.00 Hall -Mark ' Fire Apparatus (Horton) $1669990.00 Quality Emergency Vehicles (Osage) $158 9 350. 00 Wheeled Coach Industries, Inc. $1599934.00 ETR, L.L.C. (AEV) $1739284.00 Pierce Manufacturing, Inc. (Medtec) $1729500.00 Road Rescue Emergency Vehicles Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet KKK-A-1822F, or the most current revision for 'lope I Ambulance. Since equipment needs and preferences are going to vary from agency to agency - any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASSOCIATION OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 SPARTAN METRO STAR RT Specification #02 (Type I Ambulance, 4ac2 Medium Duty) The Spartan Metro Star RT, Type I Medium Duty comes with all the standard equipment as specified base vehicle specification(s) requirements which art vehicle base price as awarded by manufacturer by BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: $269, 628.00 Braun Industries, Inc. Ambulance purchased through this contract by the manufacturer for this model and FSA's included and made a part of this contract's specification. $2909 375.00 Hall -Mark Fire Apparatus (Horton) $236,464.00 ETR, L.L.C. (AEV) $2459500.00 Road Rescue Emergency Vehicles BASE PRICE: $233, 320.00 MANUFACTURER: Wheeled Coach Industries, Inc. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet KKK-A-1822F, or the most current revision for 1)pe I Ambulance. Since equipment needs and preferences are going to vary from agency to agency - any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES Base Specifications SPECIFICATION #03 -TYPE II AMBULANCE 2 WHEEL DRIVE - VAN ALL ITEMS FACTORY INSTALLED UNLESS OTHERWISE INDICATED FORD, SPRINTER, OR APPROVED EQUIVALENT 1. ENGINE a. Diesel or gas engine, must meet KKK requirements. b. Must include the chassis manufacturer's "AMBULANCE PREP PACKAGE". C. Heavy-duty alternator, minimum 200 amp. d. Maintenance free heavy-duty batteries, 750 CCA minimum. e. Manufacturer's heavy-duty engine cooling. 2, TRANSMISSION a. Automatic transmission, 4 speed with overdrive. b. Manufacturer's heavy-duty cooling. 3. DES a. Manufacturer's standard drive axle ratio for ambulance prep. 4. PERFORMANCE ITEMS a. Power steering b. Anti -lock brakes C. Power brakes, disc type front, disc or drum rear. d. Fuel capacity, minimum 25 gallon e. Heavy-duty front and rear shocks. f. Front stabilizer bar. TR 12430- Exhibit D Base Specifications #03 - Type H Ambulance Van 5. COMFORT ITEMS a. Factory installed air conditioning b. Tinted glass (factory tint) C. Dual captains chairs with armrest d. Rubber floor mat instead of carpeting e. AM/FM radio f. Power door locks g. Power windows h. Speed control and tilt wheel. 6. SAFETY ITEMS a. Driver and passenger lap and shoulder belt with retractor. b. Driver and passenger air bags C. Dual electric horns d. Two speed wipers with intermittent e. Interior dome lights wired to right and left doors. 7. TIRES AND WHEELS a. BSW, all season tread radial 15 inch tires b. Conventional spare tire and wheel C. Jack and wheel wrench 8. CHASSIS, FRAME, CAB a. Minimum GVWR 8,550 lbs. b. 138" wheelbase 9. CONSTRUCTION a. The ambulance patient compartment shall be sufficient in size to meet, the requirements of this specification and those of paragraph 3.10.1 of the current KKK-A-1822F. TR 12430- Exhibit D FLORIDA ASS(K."INTIONN OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 FORD E-350 Specification #03 (Type II Ambulance, 4g2 Van) The Ford E-350, 1)rpe II Ambulance Van purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: $559741.00 ETR, L.L.C. (AEV) $64, 230.00 Quality Emergency Vehicles (Osage) $599990.00 Stat-Line Industries (McCoy Miller) $539435.00 Pierce Manufacturing, Inc. (Medtec) $599500.00 Road Rescue Emergency Vehicles $569532.00 Wheeled Coach Industries, Inc. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet KKK-A-1822F, or the most current revision for Type II Ambulance. Since equipment needs and preferences are going to vary from agency to agency - any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 SPRINTER Specification #03 (Type II Ambulance, 4x2 Van) The Sprinter, Type II Ambulance Van purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: $72, 571.00 ETR, L.L.C. (AEV) $829500.00 Stat-Line Industries (McCoy Miller) $789500.00 Road Rescue Emergency Vehicles $769000.00 Wheeled Coach Industries, Inc. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet KKK-A-1822F, or the most current revision for lype II Ambulance. Since equipment needs and preferences are going to vary from agency to agency - any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASSOCIATION OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES Base Specifications - TYPE III A :Ijfr r 019 rkj, (DUAL REAR WHEEL, CAB &CHASSIS) ALL ITEMS FACTORY INSTALLED UNLESS OTHERWISE INDICATED FORD, GENERAL MOTORS, SPRINTER OR APPROVED EQUIVALENT 1. ENGINE a. Diesel or gas engine, must meet KKK requirements. b. Must include the chassis manufacturer's "AMBULANCE PREP PACKAGE". C. Heavy-duty alternator, minimum 200 amp. d. Maintenance free heavy-duty batteries, 750 CCA minimum. e. Manufacturer's heavy-duty engine cooling. 2. TRANSMISSION a. Automatic transmission, 4 speed with overdrive. b. Manufacturer's heavy-duty cooling. 3. AXLES a. Manufacturer's standard drive axle ratio for ambulance prep. 4. PERFORMANCE ITEMS a. Power steering b. Anti -lock brakes C. Power brakes, disc type front, disc or drum rear. d. Fuel capacity, 250 miles minimum without refueling e. Heavy-duty front and rear shocks. f. Front stabilizer bar. TR 12430- Exhibit D Base Specifications #04 - Type III Ambulance 5. COMFORT ITEMS a. Factory installed air conditioning b. Tinted glass (factory tint) C. Minimum seating for two d. Rubber floor mat instead of carpeting e . AM / FM radio f. Power door locks g. Power windows h. Speed control and tilt wheel. 6. SAFETY ITEMS a. Driver and passenger lap and shoulder belt with retractor. b. Driver and passenger air bags. C. Dual electric horns d. Outside mirrors to provide vision for vehicles 96" wide. e. Two speed wipers with intermittent. f. Interior dome lights wired to right and left doors. 7. TIRES AND WHEELS a. BSW, all season tread radial 16" tires. b. Conventional spare tire and wheel C. Jack and wheel wrench 8. CHASSIS. FRAME. CAB a. Minimum GVWR 10,500 lbs. b. Cab/chassis cutaway C. Wheelbase 138" minimum 9. MODULAR BODY CONSTRUCTION a. The ambulance body and patient compartment shall be sufficient in size to meet the requirements of this specification and those of paragraph 3.10.1 of the current KKK-A-1822F. TR 12430- Exhibit D FLORIDA j $"�LOR.IDAF COUNTIES All About :Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 FORD XL E-550 Specification #04 (Type III Ambulance, 4x2) The Ford XL E-350, Type III Ambulance purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BABE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: $97,306.00 Braun Industries, Inc. $1089758.00 Excellance, Inc. $869104.00 Pierce Manufacturing, Inc. (Medtec) $981,500.00 Road Rescue Emergency Vehicles $999200.00 Wheeled Coach Industries, Inc. $85,198.00 ETR, L. L. C. (AEV) $1229409.00 Hall -Mark Fire Apparatus (Horton) $91,275.00 Quality Emergency Vehicles (Osage) $91,217.00 Stat-Line Industries (McCoy Miller) Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet KKK-A-1822F, or the most current revision for Type III' Ambulance. Since equipment needs and preferences are going to vary from agency to agency - any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASSOCIATION OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 FORD XL E-450 Specification #04 (Type III Ambulance, 4z2) The Ford XL E-450, Type III Ambulance purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSKs base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: $119, 856.00 Braun Industries, Inc. $1.139006.00 Excellance, Inc. $959850.00 Pierce Manufacturing, Inc. (Medtec) $1129500.00 Road Rescue Emergency Vehicles $1059000.00 Wheeled Coach Industries, Inc. $989882.00 ETR, L.L.C. (AEV) $1469784.00 Hall -Mark Fire Apparatus (Horton) $1129675.00 Quality Emergency Vehicles (Osage) $103, 556.00 Stat-Line Industries (McCoy Miller) Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet KKK-A-1822F, or the most current revision for Type III Ambulance. Since equipment needs and preferences are going to vary from agency to agency - any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA INQ COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 CHEVY G3500 Specification #04 (Type III Ambulance, 4g2) The Chevy G3500, type III Ambulance purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: $113, 572.00 Braun Industries, Inc. $1219382.00 Excellance, Inc. $989716.00 Pierce Manufacturing, Inc. (Medtec) $1049500.00 Road Rescue Emergency Vehicles $106, 000.00 Wheeled Coach Industries, Inc. $989672.00 ETR, L.L.C. (AEV) $130, 520.00 Hall -Mark Fire Apparatus (Horton) $999215.00 Quality Emergency Vehicles (Osage) $102,415.00 Stat-Line Industries (McCoy Miller) Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet KKK-A-1822F, or the most current revision for Type III Ambulance. Since equipment needs and preferences are going to vary from agency to agency - any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA �� SSOCIA RA O COUNTIES AU About Norida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 CHEVY G4500 Specification #04 (Type III Ambulance, 4g2) The Chevy G4500, Type III Ambulance purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSNs base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: $14%531.00 Braun Industries, Inc. $1249339.00 Excellance, Inc. $108,156.00 Pierce Manufacturing, Inc. (Medtec) $121, 500.00 Road Rescue Emergency Vehicles $1.119400.00 Wheeled Coach Industries, Inc. $1129365.00 ETR, L.L.C. (AEV) $1569194.00 Hall -Mark Fire Apparatus (Horton) $1209775.00 Quality Emergency Vehicles (Osage) $1099634.00 Stat-Line Industries (McCoy Miller) Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet KKK-A-1822F, or the most current revision for Type III Ambulance. Since equipment needs and preferences are going to vary from agency to agency - any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12434- Exhibit D FLORIDA COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 GMC G3500 Specification #04 (Type III Ambulance, 4g2) The GMC G3500, Type III Ambulance purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. BASE PRICE: MANUFACTURER: BABE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: $989672.00 ETR, L.L.C. (AEV) $130, 520.00 Hall -Mark Fire Apparatus (Horton) $999215.00 Quality Emergency Vehicles (Osage) $1219382.00 Excellance, Inc. $989716.00 Pierce Manufacturing, Inc. (Medtec) $1049 500.00 Road Rescue Emergency Vehicles Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet KKK-A-1822F, or the most current revision for Type III Ambulance. Since equipment needs and preferences are going to vary from agency to agency - any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D �� " /iyLt} �RQa+}Ij/DAyy COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 GMC G4500 Specification #04 (Type III Ambulance, 4x2) The GMC G4500, Type III Ambulance purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: BASE PRICE: MANUFACTURER: $112, 365.00 ETR, L.L.C. (AEV) $1569194.00 Hall -Mark Fire Apparatus (Horton) $1209775.00 Quality Emergency Vehicles (Osage) $1249339.00 Excellance, Inc. $1080156.00 Pierce Manufacturing, Inc. (Medtec) $121, 500.00 Road Rescue Emergency Vehicles Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to equipment need: options required the manufactures meet KKK-A-1822F, or the most current revision and preferences are going to vary from or changes to the base unit desired listed. for 'Type III Ambulance. Since agency to agency by the purchaser shall - any additional be made through NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA A,SSOCLIMON OF COUNTIES AU About Norida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION 8c FLORIDA ASSOCIATION OF COUNTIES 2012 SPRINTER Specification #04 (Type III Ambulance, 4x2) The Sprinter, Type III Ambulance purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. BASE PRICE: MANUFACTURER: $979607.00 ETR, L.L.C. (AEV) $1129925.00 Quality Emergency Vehicles (Osage) Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet KKK-A-1822F, or the most current revision for 1)rpe III Ambulance. Since equipment needs and preferences are going to vary from agency to agency - any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASSOC1,VFRYN OF COUNTIES All About Florida FLO DA FIRE CHIEFS' ASSOCIEITION, FLORIDA SHERIFFS ASSOCIATION 8c FLORIDA ASSOCIATION OF COUNTIES Base Specifications 9 F0 P1 �4 r4l 4"4 ;� V�l 101,17A ALL ITEMS FACTORY INSTALLED UNLESS OTHERWISE INDICATED IC THE CAB AND CHASSIS SHALL BE PROVIDED BY THE BODY MANUFACTURER 1. DOCUMENTATION, DELIVERY, TRAINING a. When requested by end user, bidders to accurately state wheelbase, cab to axle, overall length, bumper swing turn radius, curb -to -curb turning radius, overall height, overall width, GVWR, angle of approach, angle of departure and SCAAN certification for drivetrain compatibility in submitted specifications b. Approval drawings provided prior to construction commencement c. Two (2) sets of operator and service manuals d. Delivery to be F.O.B. customer's location e. Three (3) days of training by employee of manufacturer f. Pump test certification by independent third party g. Water tank capacity certification by independent third party h. Aerial non-destructive, waterway flow test, performance and stability testing by independent third party i. 12 volt and, if applicable, 110 volt testing by independent third party j . Vehicle weight, as measured by certified scales 2. CHASSIS a. 110,000 psi heat treated steel frame rail with full length inner 110,000 psi C-channel liner b. 10 gauge polished stainless steel 16" to 24" extended front bumper with aluminum diamond plate gravel shield C. Tow hooks or eyes front and rear attached to the frame d. 22,500 pound minimum front axle, suspension, tubeless radial tires, steel disc wheels e. 31, 000 pound minimum rear axle, suspension, tubeless radial tires, steel disc wheels f. Front and rear mud flaps g. NFPA 1901 Chapter 4.15.3 top speed rating requirement TR 12430- Exhibit D Base Specifications #05 - 75' Mid Mounted Aerial Apparatus h. S-cam air brakes or equivalent, as large as possible, with automatic slack adjusters i. Manufacturer's standard compressor j . Minimum 5000 cubic inch air reservoir capacity k. Air dryer, color coded air lines, turn drain valves on reservoirs 1. ABS brakes m. Power steering with tilt/telescopic wheel n. Vehicle data recorder (VDR) in compliance with Chapter 4.11 with required software meeting 4.11.8 o. Electronic Stability Control shall be provided in compliance with NFPA 1901 Chapter 4.13.1.2 if the manufacturer cannot comply with Chapters 4.13.1.1 through 4.13.1.1.3.2. p. Tire pressure monitoring system with Chapter 4.13.4 3. POWERTRAIN a. Minimum 400 horsepower turbocharged diesel engine b. Engine exhaust at front of right rear wheels C. Secondary braking to meet NFPA d. Engine manufacturer's statement of engine installation approval with approved cooling system e. Drivelines to meet engine torque rating f. Silicone coolant hoses with constant torque clamps g. Automatic transmission h. 50 gallon minimum fuel tank i. OEM oil, fuel, transmission filters 4. CAB a. Medium length tilt aluminum cab meeting NFPA 1901 Chapter 14.3.2 b. Seating for four, three in SCBA seats with SCBA brackets C. Air ride driver seat, all others fixed position d. All persons in 3-point seat belts per Chapter 14, seats equipped with seat belt/occupant detection/warning system per Chapter 14 e. Electric over hydraulic cab tilt with manual back-up f. Single tone cab paint finish with 10 year paint warranty pro -rated g. Air conditioning and heating h. Remote controlled mirrors (from driver's position) with separate flat and convex sections i. DOT compliant headlights j . Forward facing turn and warning lights k. Cornering turn and warning lights 1. Minimum four (4) dome lights with red and clear bulbs m. Minimum four (4) under cab step lights n. Cab and compartment door ajar light and buzzer o. One (1) engine compartment light p. Color coded and function coded wiring q. Alternator sized according to amp draw report r. Minimum four (4) 750 CCA batteries S. Load manager with automatic high idle function t. Dual air horns with dual in -cab controls 5. AERIAL APPARATUS - ALUMINUM OR STEEL a. Aerial shall meet or exceed all sections of NFPA 1901 Chapter 19 TR 12430- Exhibit D Base Specifications #05 - 75" Mid Mounted Aerial Apparatus b. Ladder material: aluminum or steel C. Mid -mounted configuration d. 4-section aerial with minimum elevation of 75' per NFPA requirements e. Rated horizontal reach per NFPA requirements f. Rungs shall meet all aspects of NFPA 1901 19.2.5 g. Rungs equipped with a slip resistant surface meeting NFPA 1901 19.2.5 h. Rungs spacing meeting NFPA 1901 19.2.5 i. Turntable with pedestal mounted controls meeting NFPA 1901 19.4 j . Aerial rated load capacity not flowing water: 500 lbs. minimum in addition to equipment mounted at tip of ladder k. Aerial rated load capacity while flowing 1000 gpm: 500 lbs. minimum in addition to equipment mounted at tip of ladder 1. Rated load capacities shall meet and /or exceed NFPA 1901 19.3 m. The aerial shall be rated in multiple configurations per Chapter 19.3.4 n. Extend/retract, rotate and hydraulic or electric over hydraulic controls meeting NFPA 1901 19.5 through 19.5.3.6. o. Hydraulic pressure gauge at turntable controls p. Illuminated Angle of Elevation Indicator meeting NFPA 1901 19.4.1 q. Flowmeter on pump panel meeting NFPA 1901 19.6.8 r. All aerial control devices shall meet NFPA 1901 19.17 S. Fall protection provisions shall be provided. t. Bidders to state type of stabilizers and overall stabilizers spread u. Aerial shall meet structural safety factors in accordance with NFPA 1901 19.20 V. Aerial shall meet NFPA 1901 stability safety factors Chapter 19.21 w. Lighted turntable area X. The aerial manufacturer (the company that manufacturers the entire aerial device) shall maintain a Quality Control Program in accordance with NFPA 1901 Chapter 19.22 y. Special attention shall be paid to meeting all safety requirements per NFPA 1901 19.20 Z. Aerial shall be fully tested and certified by third party certified testing company per NFPA 1901 19.24 and 19.25 aa. 2-way intercom system between ladder tip and turntable control pedestal. bb. Minimum 1000 gpm waterway system meeting NFPA 1901 with remote control nozzle (controls at fly section and at turntable control pedestal) with movable manual pinned waterway or remote control movable waterway. cc. Maximum travel height 10 ft. dd. Minimum 4" waterway discharge with 4" valve with handwheel or electric control on pump panel ee. Minimum 4" waterway inlet (non -gated) on rear or on side of body per NFPA 1901 Chapter 19.6.6 ff. Waterway relief valve and minimum 1.5" drain gg. Stabilizer controls and stabilizer to aerial controls mounted on left side of apparatus body at pump panel hh. One (1) high intensity spotlights on ladder tip ii. Two high intensity flood lights on ladder base jj. Painted finish on steel aerial -bidder shall provide copy of paint warranty on aerial kk. Instruction plates and signs must be installed per NFPA 1901 Chapter 19.23 6. FIRE PUMP & PLUMBING a. Minimum 1250 GPM pump as rated per NFPA 1901 Chapter 16 b. Air operated pump shift TR 12430- Exhibit D Base 5peci, f �ications #05 - 759 Mid Mounted Aerial Apparatus C. Discharge pressure relief valve d. Intake pressure relief valve e. Master drain valve f. Electric dry type primer g. Pump panel lights, 3 each side h. Pump compartment light i. OK to pump lights in cab and at pump panel j . Engine cooler k. Pump cooler 1. Two (2) 6" steamers, one on side panel m. 2.5" left side gated suction n. 1.5" tank fill o. Two (2) 2" crosslay hose beds over the pump compartment p. Two (2) 2-1/2" left side discharges q. Two (2) 2-1/2" right side discharges r. Stainless steel schedule 10 piping with 10 year warranty S. Panel gauge package: water tank level, tack, oil pressure, water temperature, and alarm system t. Minimum 300 gallon polypropylene booster tank with lifetime warranty u. 3" tank to pump connection V. Minimum 10" x 8" fill tower with minimum 4" overflow tube W. 15 ft. of soft suction hose sized for capacity of fire pump 7. APPARATUS BODY voltmeter, light a. Bidders to bid on each of their offered construction types: • Extruded aluminum • Formed aluminum • Formed galvanneal steel • Formed stainless steel b. Bidders to state thicknesses, alloys and construction methods of all materials used in body construction C. High left side compartments d. High right side compartments e. Bidders to accurately state the total cubic footage of compartment space, along with each compartment size f. Lights in compartments to meet NFPA 1901 Chapter 13.10.5 g. Hose bed lighting must be provided per NFPA Chapter 1901 13.10.2 h. Back up alarm i. Ladder storage for minimum 85' NFPA ground ladders, ladders to be included j . Rear pike pole storage for minimum of six (6) pike poles fully enclosed at rear of apparatus k. Slide out pump operator platform 1. Hose bed with hose restraints to be NFPA quint compliant m. Steps and handrails for climbing from ground to turntable - bidders to state exact design n. Lights at each step o. Stop/turn/back up lights p. DOT clearance and marker lights q. License plate light r. Rear deck lights S. Rub rail along each side of body t. Running boards at each pump panel TR 12430- Exhibit D Base Specifications #05 - 75' Mid Mounted Aerial Apparatus Q 9. 10. u. Brushed stainless steel or black non -glare aluminum pump panels EMERGENCY WARNING a. NFPA Zone A lower and upper level lighting b. NFPA Zone B / D lower level lighting C. NFPA Zone C upper and lower level ligLZ7hting d. Electronic 200 watt siren/PA with minimum PAINT FINISH/REFLECTIVE STRIPING 100 watt speaker recessed in bumper a. Cab and body to be painted single tone with 10 year pro -rated paint and corrosion perforation warranty b. Wheels painted to match the cab and body C. Reflective striping in accordance with Chapter 15.9.3 d. Reflective chevron on rear of apparatus in accordance with Chapter 15.9.3.2. a. 1 year bumper to bumper mechanical, excluding normal wear and tear items b. 10 year cab and body structural C. 10 year paint pro -rated d. 10 year corrosion perforation on cab and body e. 20 year aerial structural f. Lifetime frame warranty g. 2 year front axle h. 2 year rear axle i. 5 year engine j . 5 year fire pump k. Lifetime booster tank 1. Manufacturer's standard 5 year warranty for transmission TR 12430- Exhibit D FLORIDA COUNTIES All About Norida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION 8c FLORIDA ASSOCIATION OF COUNTIES 2012 75' MID MOUNTED AERIAL. APPARATUS Specification #05 (Formed Stainless Steel Body - Aluminum Ladder) The 75' Mid Mounted Aerial Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: Sutphen SL75 BASE PRICE: $6509727.00 MANUFACTURER: Sutphen Corporation While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a quint apparatus with a special emphasis on Chapters 1, 29, 3, 4, 9, 12, 139 149 159 16, 189 19, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA COUNTIES AU About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION 8c FLORIDA ASSOCIATION OF COUNTIES Base Specifications #06 - 75' REAR MI • * �" * * • V� ALL ITEMS FACTORY INSTALLED UNLESS OTHERWISE INDICATED THE CAB AND CHASSIS SHALL BE PROVIDED BY THE BODY MANUFACTURER 1. DOCUMENTATION, DELIVERY. TRAINING a. When requested by end user, bidders to accurately state wheelbase, cab to axle, overall length, bumper swing turn radius, curb -to -curb turning radius, overall height, overall width, GVWR, angle of approach, angle of departure and SCAAN certification for drivetrain compatibility- in submitted specifications b. Approval drawings provided prior to construction commencement C. Two (2) sets of operator and service manuals d. Delivery to be F.O.B. customer's location e. Three (3) days of training by employee of manufacturer f. Pump test certification by independent third party g. Water tank capacity certification by independent third party h. Aerial non-destructive, waterway flow test, performance and stability testing by independent third party i. 12 volt and, if applicable, 110 volt testing by independent third party j . Vehicle weight, as measured by certified scales 2. CHASSIS a. 110,000 psi heat treated steel frame rail with full length inner 110,000 psi C-channel liner b. 10 gauge polished stainless steel 16" to 24" extended front bumper with aluminum diamond plate gravel shield C. Tow hooks or eyes front and rear attached to the frame d. 20,000 pound minimum front axle, suspension, tubeless radial tires, steel disc wheels C. 31, 000 pound minimum rear axle, suspension, tubeless radial tires, steel disc wheels f. Front and rear mud flaps g. NFPA 1901 Chapter 4.15.3 top speed rating requirement h. S-cam air brakes or equivalent, as large as possible, with automatic slack adjusters TR 12430- Exhibit D Base Specifications #06 - 75" Rear Mounted Aerial Apparatus i. Manufacturer's standard compressor j . Minimum 5000 cubic inch air reservoir capacity k. Air dryer, color coded air lines, turn drain valves on reservoirs 1. ABS brakes m. Power steering with tilt/telescopic wheel n. Vehicle data recorder (VDR) in compliance with Chapter 4.11 with required software meeting 4.11.8 0. Electronic Stability Control shall be provided in compliance with NFPA 1901 Chapter 4.13.1.2 if the manufacturer cannot comply with Chapters 4.13.1.1 through 4.13.1.1.3.2. p. Tire pressure monitoring system with Chapter 4.13.4 3. POWERTRAIN a. Minimum 400 horsepower turbocharged diesel engine b. Engine exhaust at front of right rear wheels C. Secondary braking to meet NFPA d. Engine manufacturer's statement of engine installation approval with approved cooling system C. Drivelines to meet engine torque rating f. Silicone coolant hoses with constant torque clamps g. Automatic transmission h. 50 gallon minimum fuel tank i. OEM oil, fuel, transmission filters 4. CAB a. Medium length tilt aluminum cab meeting NFPA 1901 Chapter 14.3.2 b. Seating for four, three in SCBA seats with SCBA brackets C. Air ride driver seat, all others fixed position d. All persons in 3-point seat belts per Chapter 14, seats equipped with seat belt/occupant detection/warning system per Chapter 14 e. Electric over hydraulic cab tilt with manual back-up f. Single tone cab paint finish with 10 year paint warranty pro -rated g. Air conditioning and heating h. Remote controlled mirrors (from driver's position) with separate flat and convex sections i. DOT compliant headlights j . Forward facing turn and warning lights k. Cornering turn and warning lights 1. Minimum four (4) dome lights with red and clear bulbs m. Minimum four (4) under cab step lights n. Cab and compartment door ajar light and buzzer 0. One (1) engine compartment light p. Color coded and function coded wiring q. Alternator sized according to amp draw report r. Minimum four (4) 750 CCA batteries S. Load manager with automatic high idle function t. Dual air horns with dual in -cab controls 5. AERIAL APPARATUS - ALUMINUM OR STEEL a. Aerial shall meet or exceed all sections of NFPA 1901 Chapter 19 TR 12430- Exhibit D Base Specifications #06 - 75' Rear Mounted Aerial Apparatus b. Ladder material: aluminum or steel C. Rear -mounted configuration d. 3-section aerial with minimum elevation of 75' per NFPA requirements e. Rated horizontal reach per NFPA requirements f. Rungs shall meet all aspects of NFPA 1901 19.2.5 g. Rungs equipped with a slip resistant surface meeting NFPA 1901 19.2.5 h. Rungs spacing meeting NFPA 1901 19.2.5 i. Turntable with pedestal mounted controls meeting NFPA 1901 19.4 j . Aerial rated load capacity not flowing water: 500 lbs. minimum in addition to equipment mounted at tip of ladder k. Aerial rated load capacity while flowing 1000 gpm: 500 lbs. minimum in addition to equipment mounted at tip of ladder 1. Rated load capacities shall meet and / or exceed NFPA 1901 19.3 m. The aerial shall be rated in multiple configurations per Chapter 19.3.4 n. Extend/retract, rotate and hydraulic or electric over hydraulic controls meeting NFPA 1901 19.5 through 19.5.3.6. 0. Hydraulic pressure gauge at turntable controls p. Illuminated Angle of Elevation Indicator meeting NFPA 1901 19.4.1 q. Flowmeter on turntable control pedestal meeting NFPA. 1901 19.6.8 r. All aerial control devices shall meet NFPA 1901 19.17 S. Fall protection provisions shall be provided. t. Bidders to state type of stabilizers and overall stabilizers spread u. Aerial shall meet structural safety factors in accordance with NFPA 1901 19.20 V. Aerial shall meet NFPA 1901 stability safety factors Chapter 19.21 w. Lighted turntable area X. The aerial manufacturer (the company that manufacturers the entire aerial device) shall maintain a Quality Control Program in accordance with NFPA 1901 Chapter 19.22 y. Special attention shall be paid to meeting all safety requirements per NFPA 1901 19.20 Z. Aerial shall be fully tested and certified by third party certified testing company per NFPA 1901 19.24 and 19.25 aa. 2-way intercom system between ladder tip and turntable control pedestal. bb. Minimum 1000 gpm waterway system meeting NFPA 1901 with remote control nozzle (controls at fly section and at turntable control pedestal) with movable manual pinned waterway or remote control movable waterway. cc. Minimum 4" rear waterway inlet with pressure gauge and long handled chrome cap dd. Minimum 4" waterway discharge with 4" valve with handwheel or electric control on pump panel ee. Waterway relief valve and minimum 1.5" drain at rear of apparatus ff. Stabilizer controls and stabilizer to aerial controls mounted on rear of apparatus body gg. One (1) high intensity spotlights on ladder tip hh. Two high intensity flood lights on ladder base ii. Painted finish on steel aerial -bidder shall provide copy of paint warranty on aerial jj . Instruction plates and signs must be installed per NFPA 1901 Chapter 19.23 6. FIRE PUMP & PLUMBING a. Minimum 1250 GPM pump as rated per NFPA 1901 Chapter 16 b. Air operated pump shift C. Discharge pressure relief valve d. Intake pressure relief valve e. Master drain valve TR 12430- Exhibit D Base Specifications #06 - 75" Rear Mounted Aerial Apparatus f. Electric dry type primer g. Pump panel lights, 3 each side h. Pump compartment light i. OK to pump lights in cab and at pump panel j . Engine cooler k. Pump cooler 1. Two (2) 6" steamers, one on side panel m. 2.5" left side gated suction n. 1.5" tank fill 0. Two (2) 2" crosslay hose beds over the pump compartment p. Two (2) 2-1/2" left side discharges q. Two (2) 2-1/2" right side discharges r. Stainless steel schedule 10 piping with 10 year warranty S. Panel gauge package: water tank level, tach, oil pressure, water temperature, voltmeter, light and alarm system t. Minimum 300 gallon polypropylene booster tank with lifetime warranty u. 3" tank to pump connection V. Minimum 10" x 8" fill tower with minimum 4" overflow tube W. 15 ft. of soft suction hose sized for capacity of fire pump 7. APPARATUS BODY a. Bidders to bid on each of their offered construction types: • Extruded aluminum • Formed aluminum • Formed galvanneal steel • Formed stainless steel b. Bidders to state thicknesses, alloys and construction methods of all materials used in body construction C. High left side compartments d. High right side compartments e. Bidders to accurately state the total cubic footage of compartment space, along with each compartment size f. Lights in compartments to meet NFPA 1901 Chapter 13.10.5 g. Hose bed lighting must be provided per NFPA Chapter 1901 13.10.2 h. Back up alarm i. Rear ladder storage for minimum 85' NFPA ground ladders fully enclosed at rear of apparatus, ladders to be included j . Rear pike pole storage for minimum of six (6) pike poles fully enclosed at rear of apparatus k. Slide out pump operator platform 1. Hose bed with hose restraints to be NFPA quint compliant m. Steps and handrails for climbing from ground to turntable - bidders to state exact design n. Lights at each step 0. Stop/turn/back up lights p. DOT clearance and marker lights q. License plate light r. Rear deck lights S. Rub rail along each side of body t. Running boards at each pump panel u. Brushed stainless steel or black non -glare aluminum pump panels TR 12430- Exhibit D Base Specifccations #06 - 75' Rear Mounted Aerial Apparatus S. EMERGENCY WARNING a. NFPA Zone A lower and upper level lighting b. NFPA Zone B / D lower level lighting C. NFPA Zone C upper and lower level lighting d. Electronic 200 watt siren/PA with minimum 9. PAINT FINISH/REFLECTIVE STRIPING 100 watt speaker recessed in bumper a. Cab and body to be painted single tone with 10 year pro -rated paint and corrosion perforation warranty b. Wheels painted to match the cab and body C. Reflective striping in accordance with Chapter 15.9.3 d. Reflective chevron on rear of apparatus in accordance with Chapter 15.9.3.2. 10. WARRANTY a. 1 year bumper to bumper mechanical, excluding normal wear and tear items b. 10 year cab and body structural C. 10 year paint pro -rated d. 10 year corrosion perforation on cab and body e. 20 year aerial structural f. Lifetime frame warranty g. 2 year front axle h. 2 year rear axle i. 5 year engine j . 5 year fire pump k. Lifetime booster tank 1. Manufacturer's standard 5 year warranty for transmission TR 12430- Exhibit D FLORIDA COUNTIES AU About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION 8z FLORIDA ASSOCIATION OF COUNTIES 2012 75' REAR MOUNTED AERIAL APPARATUS Specification #06 (Extruded Aluminum Body -Aluminum Ladder) The 75' Rear Mounted Aerial Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: E-ONE HP 75 BASE PRICE: $519 9 797.00 MANUFACTURER: Hall -Mark Fire Apparatus (E-ONE) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a quint apparatus with a special emphasis on Chapters 1, 29, 39, 49 99 12, 13, 149, 159 169 189, 19, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA AISISOCIIATKWI OF COUNTIES All About Norida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 75' REAR MOUNTED AERIAL APPARATUS Specification #06 (Extruded Aluminum Body - Steel Ladder) The 75' Rear Mounted Aerial Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: Crimson 75RMA BASE PRICE: $5659033.00 MANUFACTURER: Crimson Fire (Public Safety... ) MODEL: Intruder BASE PRICE: $4999648.00 MANUFACTURER: Ferrara Fire Apparatus, Inc. Igniter XD $551,566.00 Ferrara Fire Apparatus, Inc. Spartan Metro Star 759 $5109188.00 Rosenbauer South Dakota, LLC While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a quint apparatus with a special emphasis on Chapters 1, 2, 3, 4, 9, 129 139 149 159 169 18, 19, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASSOCIATIONN OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 75' REAR MOUNTED AERIAL APPARATUS Specification #06 (Formed Aluminum Body -Aluminum Ladder) The 75' Rear Mounted Aerial Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: Pierce Impel 75' HDL BASE PRICE: $5559591.00 MANUFACTURER: Pierce Manufacturing, Inc. While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a quint apparatus with a special emphasis on Chapters 1, 29 39 49 99 129 139 149 159 169 18, 199 FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASSOCINTION OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 75' REAR MOUNTED AERIAL APPARATUS Specification #06 (Formed Aluminum Body - Steel Ladder) The 75' Rear Mounted Aerial Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSKs base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: MANUFACTURER: MODEL: BASE PRICE: MANUFACTURER: American LaFrance 75RML $5819901.00 American LaFrance, LLC KME Predator AerialCat FL0675 $587,390.00 Kovatch Mobile Equip. Corp. (KME) MODEL: Spartan Metro Star 759 BASE PRICE: $4999929.00 MANUFACTURER: Rosenbauer South Dakota, LLC Crimson 75RMA $5469291.00 Crimson Fire (Public Safety...) Pierce Impel 75" HDL $5559,141.00 Pierce Manufacturing, Inc. While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a quint apparatus with a special emphasis on Chapters 1, 29, 39 49 9, 129 13, 149 15, 169, 189, 1 % FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D :FLORIDA. COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION 8L FLORIDA ASSOCIATION OF COUNTIES 2012 75' REAR MOUNTED AERIAL APPARATUS Specification #06 (Formed Stainless Steel Body - Steel Ladder) The 75' Rear Mounted Aerial Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: American LaFrance 75RML Crimson 75RMA BASE PRICE: $584, 987.00 $572,135.00 MANUFACTURER: American LaFrance, LLC Crimson Fire (Public Safety...) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a quint apparatus with a special emphasis on Chapters 1, 29 39 4, 9, 129 13, 149 159 169, 18, 199, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASSOCIATION OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES Base Specifications N # 07 - 1009 &I _"_ #1�1 4"4 ;J V�11 OSAA ALL ITEMS FACTORY INSTALLED UNLESS OTHERWISE INDICATED THE CAB AND CHASSIS SHALL BE PROVIDED BY THE BODY MANUFACTURER 1. DOCUMENTATION. DELIVERY. TRAINING a. When requested by end user, bidders to accurately state wheelbase, cab to axle, overall length, bumper swing turn radius, curb -to -curb turning radius, overall height, overall width, GVWR, angle of approach, angle of departure and SCAAN certification for drivetrain compatibility in submitted specifications b. Approval drawings provided prior to construction commencement C. Two (2) sets of operator and service manuals d. Delivery to be F.O.B. customer's location e. Three (3) days of training by employee of manufacturer f. Pump test certification by independent third party g. Water tank capacity certification h. Aerial non-destructive, performance and stability testing by independent third party i. 12 volt and, if applicable, 110 volt testing by independent third party j . Vehicle weight, as measured by certified scales 2. CHASSIS a. 110, 000 psi heat treated steel frame rail with full length inner 110, 000 psi C-channel liner or integral torque box frame b. 10 gauge polished stainless steel 16" to 24" extended front bumper with aluminum diamond plate gravel shield c. Tow hooks or eyes front and rear attached to the frame d. 22,500 pound minimum front axle, suspension, tubeless radial tires, steel disc wheels e. 40,000 pound minimum rear axle, suspension, tubeless radial tires, steel disc wheels f. Front and rear mud flaps g. NFPA 1901 Chapter 4.15.3 top speed rating requirement h. S-cam air brakes or equivalent, as large as possible, with automatic slack adjusters TR 12430- Exhibit D Base Specifications #07 - 100' Mid Mounted Aerial Apparatus i. Manufacturer's standard compressor j . Minimum 5000 cubic inch air reservoir capacity k. Air dryer, color coded air lines, turn drain valves on reservoirs 1. ABS brakes m. Power steering with tilt/telescopic wheel n. Vehicle data recorder (VDR) in compliance with Chapter 4.11 with required software meeting 4.11.8 0. Electronic Stability Control shall be provided in compliance with NFPA 1901 Chapter 4.13.1.2 if the manufacturer cannot comply with Chapters 4.13.1.1 through 4.13.1.1.3.2. p. Tire pressure monitoring system with Chapter 4.13.4 3. POWERTRAIN a. Minimum 450 horsepower turbocharged diesel engine with 1450 ft. lb. torque rating b. Engine exhaust at front of right rear wheels C. Secondary braking to meet NFPA d. Engine manufacturer's statement of engine installation approval with approved cooling system e. Drivelines to meet engine torque rating f. Silicone coolant hoses with constant torque clamps g. EVS 4000 automatic transmission h. 50 gallon minimum fuel tank i. OEM oil, fuel, transmission filters 4. CAB a. Medium length tilt aluminum cab meeting NFPA 1901 Chapter 14.3.2 b. Seating for four, three in SCBA seats with SCBA brackets C. Air ride driver seat, all others fixed position d. All persons in 3-point seat belts per Chapter 14, seats equipped with seat belt/occupant detection/warning system per Chapter 14 e. Electric over hydraulic cab tilt with manual back-up f. Single tone cab paint finish with 10 year paint warranty pro -rated g. Air conditioning and heating h. Remote controlled mirrors (from driver's position) with separate flat and convex sections i. DOT compliant headlights j . Forward facing turn and warning lights k. Cornering turn and warning lights I. Minimum four (4) dome lights with red and clear bulbs m. Minimum four (4) under cab step lights n. Cab and compartment door ajar light and buzzer o. One (1) engine compartment light p. Color coded and function coded wiring q. Alternator sized according to amp draw report r. Minimum four (4) 750 CCA batteries S. Load manager with automatic high idle function t. Dual air horns with dual in -cab controls 5. AERIAL APPARATUS - ALUMINUM OR STEEL a. Aerial shall meet or exceed all sections of NFPA 1901 Chapter 19 b. Ladder material: aluminum or steel C. Mid -mounted configuration TR 12430- Exhibit D Base Specifications # 07 - 100' Mid Mounted Aerial Apparatus d. 5-section aerial with minimum elevation of 100' per NFPA reqirements e. Rated horizontal reach per NFPA requirements f. Rungs shall meet all aspects of NFPA 1901 19.2.5 g. Rungs equipped with a slip resistant surface meeting NFPA 1901 19.2.5 h. Rungs spacing meeting NFPA 1901 19.2.5 i. Turntable with pedestal mounted controls meeting NFPA 1901 19.4 j . Aerial rated load capacity not flowing water: 500 lbs. minimum in addition to equipment mounted at tip of ladder k. Aerial rated load capacity while flowing 1000 gpm: 500 lbs. minimum in addition to equipment mounted at tip of ladder 1. Rated load capacities shall meet and / or exceed NFPA 1901 19.3 m. The aerial shall be rated in multiple configurations per Chapter 19.3.4 n. Extend/retract, rotate and hydraulic or electric over hydraulic controls meeting NFPA 1901 19.5 through 19.5.3.6. o. Hydraulic pressure gauge at turntable controls p. Illuminated Angle of Elevation Indicator meeting NFPA 1901 19.4.1 q. Flowmeter on turntable control pedestal meeting NFPA 1901 19.6.8 r. All aerial control devices shall meet NFPA 1901 19.17 S. Fall protection provisions shall be provided. t. Bidders to state type of stabilizers and overall stabilizers spread U. Aerial shall meet structural safety factors in accordance with NFPA 1901 19.20 V. Aerial shall meet NFPA 1901 stability safety factors Chapter 19.21 w. Lighted turntable area X. The aerial manufacturer (the company that manufacturers the entire aerial device) shall maintain a Quality Control Program in accordance with NFPA 1901 Chapter 19.22 y. Special attention shall be paid to meeting all safety requirements per NFPA 1901 19.20 Z. Aerial shall be fully tested and certified by third party certified testing company per NFPA 1901 19.24 and 19.25 aa. 2-way intercom system between ladder tip and turntable control pedestal. bb. Minimum 1000 gpm waterway system meeting NFPA 1901 with remote control nozzle (controls at fly section and at turntable control pedestal) with movable manual pinned waterway or remote control movable waterway. cc. Minimum 4" waterway discharge with 4" valve with handwheel or electric control on pump panel dd. Minimum 4" waterway inlet (non -gated) on rear or on side of body per NFPA 1901 Chapter 19.6.6 ee. Waterway relief valve and minimum 1.5"drain ff. Stabilizer controls and stabilizer to aerial controls mounted on rear of apparatus body gg. One (1) high intensity spotlights on ladder tip hh. Two high intensity flood lights on ladder base ii. Painted finish on steel aerial -bidder shall provide copy of paint warranty on aerial j j . Instruction plates and signs must be installed per NFPA 1901 Chapter 19.23 6. FIRE PUMP & PLUMBING a. Minimum 1500 GPM pump as rated per NFPA 1901 b. Air operated pump shift C. Discharge pressure relief valve d. Intake pressure relief valve e. Master drain valve f. Electric dry type primer g. Pump panel lights, 3 each side Chapter 16 TR 12430- Exhibit D Base Spect,tcations #07 - 100' Mid Mounted Aerial Apparatus h. Pump compartment light i. OK to pump lights in cab and at pump pane j . Engine cooler k. Pump cooler 1. Two (2) 6" steamers, one on side panel m. 2.5" left side gated suction n. 1.5" tank fill o. Two (2) 2" crosslay hose beds over the pump compartment p. Two (2) 2-1/2" left side discharges q. Two (2) 2-1/2" right side discharges r. Stainless steel schedule 40 piping with 10 year warranty S. Panel gauge package: water tank level, tach, oil pressure, water temperature, voltmeter, light and alarm system t. Minimum 300 gallon polypropylene booster tank with lifetime warranty u. 3" tank to pump connection V. Minimum 10" x 8" fill tower with minimum 4" overflow tube W. 15 ft. of soft suction hose sized for capacity of fire pump 7. APPARATUS BODY a. Bidders to bid on each of their offered construction types: • Extruded aluminum • Formed aluminum • Formed galvanneal steel • Formed stainless steel b. Bidders to state thicknesses, alloys and construction methods of all materials used in body construction C. High left side compartments d. High right side compartments e. Bidders to accurately state the total cubic footage of compartment space, along with each compartment size f. Lights in compartments to meet NFPA 1901 Chapter 13.10.5 g. Hose bed lighting must be provided per NFPA Chapter 1901 13.10.2 h. Back up alarm i. Rear ladder storage for minimum 115' NFPA ground ladders fully enclosed at rear of apparatus, ladders to be included j . Rear pike pole storage for minimum of six (6) pike poles fully enclosed at rear of apparatus k. Slide out pump operator platform 1. Hose bed with hose restraints to be NFPA quint compliant m. Steps and handrails for climbing from ground to turntable - bidders to state exact design n. Lights at each step o. Stop/turn/back up lights p. DOT clearance and marker lights q. License plate light r. Rear deck lights S. Rub rail along each side of body t. Running boards at each pump panel U. Brushed stainless steel or black non -glare aluminum pump panels TR 12430- Exhibit D Base Specifications #07 - 100' Mid Mounted Aerial Apparatus E3 9. EMERGENCY WARNING a. NFPA Zone A lower and upper level lighting b. NFPA Zone B / D lower level lighting C. NFPA Zone C upper and lower level lighting d. Electronic 200 watt siren/PA with minimum PAINT FINISH/REFLECTIVE STRIPING 100 watt speaker recessed in bumper a. Cab and body to be painted single tone with 10 year pro -rated paint and corrosion perforation warranty b. Wheels painted to match the cab and body C. Reflective striping in accordance with Chapter 15.9.3 d. Reflective chevron on rear of apparatus in accordance with Chapter 15.9.3.2. a. 1 year bumper to bumper mechanical, excluding normal wear and tear items b. 10 year cab and body structural C. 10 year paint pro -rated d. 10 year corrosion perforation on cab and body e. 20 year aerial structural f. Lifetime frame warranty g. 2 year front axle h. 2 year rear axle j . 5 year fire pump k. Lifetime booster tank 1. Manufacturer's standard 5 year warranty for transmission TR 12430- Exhibit D FLORIDA ASSOCIATRYN OF* COUNTIES All About Norida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 100' MID MOUNTED AERIAL APPARATUS Specification #07 (Extruded Aluminum Body - Steel Ladder) The 100' Mid Mounted Aerial Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: Igniter XD Spectr BASE PRICE: $7559677.00 $733,191.00 MANUFACTURER: Ferrara Fire Apparatus, Inc. Ferrara Fire Apparatus, Inc. While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a quint apparatus with a special emphasis on Chapters 1, 29 39 49 9, 129 139 149 15, 169 189 19, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 100' MID MOUNTED AERIAL APPARATUS Specification #07 (Formed Aluminum Body - Steel Ladder) The 100' Mid Mounted Aerial Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: KME Predator AerialCat FL07100 Pierce Arrow XT HDL BASE PRICE: $8009204.00 $7539201.00 MANUFACTURER: Kovatch Mobile Equip. Corp. (KME) Pierce Manufacturing, Inc. While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a quint apparatus with a special emphasis on Chapters 1, 2, 3, 49 9, 129 139 14, 15, 169 189 199, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASSOCIKIJON Of COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 100' MID MOUNTED AERIAL APPARATUS Specification #07 (Formed Stainless Steel Body - Aluminum Ladder) The 100' Mid Mounted Aerial Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: MANUFACTURER: Sutphen SL 100 $7449 560.00 Sutphen Corporation While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a quint apparatus with a special emphasis on Chapters 1, 29, 39 4, 9, 129 139 149 159 169 18, 19, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORASSOCIN�g-IDA ION OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES Base Specifications ri 11 �) Z, 10 1� I I ff- 12 11 ; J ; h 1 1 z 7� N t ALL ITEMS FACTORY INSTALLED UNLESS OTHERWISE INDICATED THE CAB AND CHASSIS SHALL BE PROVIDED BY THE BODY MANUFACTURER 1. DOCUMENTATION. DELIVERY. TRAINING a. When requested by end user, bidders to accurately state wheelbase, cab to axle, overall length, bumper swing turn radius, curb -to -curb turning radius, overall height, overall width, GVWR, angle of approach, angle of departure and SCAAN certification for drivetrain compatibility in submitted specifications b. Approval drawings provided prior to construction commencement c. Two (2) sets of operator and service manuals d. Delivery to be F.O.B. customer's location e. Three (3) days of training by employee of manufacturer f. Pump test certification by independent third party g. Water tank capacity certification h. Aerial non-destructive, performance and stability testing by independent third party i. 12 volt and, if applicable, 110 volt testing by independent third party j . Vehicle weight, as measured by certified scales 2. CHASSIS a. 110,000 psi heat treated steel frame rail with full length inner 110,000 psi C-channel liner or integral torque box frame b. 10 gauge polished stainless steel 16" to 24" extended front bumper with aluminum diamond plate gravel shield C. Tow hooks or eyes front and rear attached to the frame d. 20,000 pound minimum front axle, suspension, tubeless radial tires, steel disc wheels e. 48, 000 pound minimum rear axle, suspension, tubeless radial tires, steel disc wheels f. Front and rear mud flaps g. NFPA 1901 Chapter 4.15.3 top speed rating requirement h. S-cam air brakes or equivalent, as large as possible, with automaticslack adjusters TIC 12430- Exhibit D Base Specifications #08 - 100' Rear Mounted Aerial Apparatus i. Manufacturer's standard compressor j . Minimum 5000 cubic inch air reservoir capacity k. Air dryer, color coded air lines, turn drain valves on reservoirs 1. ABS brakes m. Power steering with tilt/telescopic wheel n. Vehicle data recorder (VDR) in compliance with Chapter 4.11 with required software meeting 4.11.8 o. Electronic Stability Control shall be provided in compliance with NFPA 1901 Chapter 4.13.1.2 if 'the manufacturer cannot comply with Chapters 4.13.1.1 through 4.13.1.1.3.2. p. Tire pressure monitoring system with Chapter 4.13.4 3. POWERTRAIN a. Minimum 450 horsepower turbocharged diesel engine with 1450 ft. lb. torque rating b. Engine exhaust at front of right rear wheels C. Secondary braking to meet NFPA d. Engine manufacturer's statement of engine installation approval with approved cooling system e. Drivelines to meet engine torque rating f. Silicone coolant hoses with constant torque clamps g. EVS 4000 automatic transmission h. 50 gallon minimum fuel tank i. OEM oil, fuel, transmission filters 4. CAB a. Medium length tilt aluminum cab meeting NFPA 1901 Chapter 14.3.2 b. Seating for four, three in SCBA seats with SCBA brackets C. Air ride driver seat, all others fixed position d. All persons in 3-point seat belts per Chapter 14, seats equipped with seat belt/occupant detection/warning system per Chapter 14 e. Electric over hydraulic cab tilt with manual back-up f. Single tone cab paint finish with 10 year paint warranty pro -rated g. Air conditioning and heating h. Remote controlled mirrors (from driver's position) with separate flat and convex sections i. DOT compliant headlights j . Forward facing turn and warning lights k. Cornering turn and warning lights 1. Minimum four (4) dome lights with red and clear bulbs m. Minimum four (4) under cab step lights n. Cab and compartment door ajar light and buzzer 0. One (1) engine compartment light p. Color coded and function coded wiring q. Alternator sized according to amp draw report r. Minimum four (4) 750 CCA batteries S. Load manager with automatic high idle function t. Dual air horns with dual in -cab controls 5. AERIAL APPARATUS - ALUMINUM OR STEEL a. Aerial shall meet or exceed all sections of NFPA 1901 Chapter 19 b. Ladder material: aluminum or steel TR 12430- Exhibit D Base Specifications #08 - 100" Rear Mounted Aerial Apparatus C. Rear -mounted configuration d. 4-section aerial with minimum elevation of 100' per NFPA requirements e. Rated horizontal reach per NFPA requirements f. Rungs shall meet all aspects of NFPA 1901 19.2.5 g. Rungs equipped with a slip resistant surface meeting NFPA 1901 19.2.5 h. Rungs spacing meeting NFPA 1901 19.2.5 i. Turntable with pedestal mounted controls meeting NFPA 1901 19.4 j . Aerial rated load capacity not flowing water: 500 lbs. minimum in addition to equipment mounted at tip of ladder k. Aerial rated load capacity while flowing 1000 gpm: 500 lbs. minimum in addition to equipment mounted at tip of ladder 1. Rated load capacities shall meet and / or exceed NFPA 1901 19.3 m. The aerial shall be rated in multiple configurations per Chapter 19.3.4 n. Extend/retract, rotate and hydraulic or electric over hydraulic controls meeting NFPA 1901 19.5 through 19.5.3.6. o. Hydraulic pressure gauge at turntable controls p. Illuminated Angle of Elevation Indicator meeting NFPA 1901 19.4.1 q. Flowmeter on turntable control pedestal meeting NFPA 1901 19.6.8 r. All aerial control devices shall meet NFPA 1901 19.17 S. Fall protection provisions shall be provided. t. Bidders to state type of stabilizers and overall stabilizers spread u. Aerial shall meet structural safety factors in accordance with NFPA 1901 19.20 V. Aerial shall meet NFPA 1901 stability safety factors Chapter 19.21 w. Lighted turntable area X. The aerial manufacturer (the company that manufacturers the entire aerial device) shall maintain a Quality Control Program in accordance with NFPA 1901 Chapter 19.22 y. Special attention shall be paid to meeting all safety requirements per NFPA 1901 19.20 Z. Aerial shall be fully tested and certified by third party certified testing company per NFPA 1901 19.24 and 19.25 aa. 2-way intercom system between ladder tip and turntable control pedestal. bb. Minimum 1000 gpm waterway system meeting NFPA 1901 with remote control nozzle (controls at fly section and at turntable control pedestal) with movable manual pinned waterway or remote control movable waterway. cc. Minimum 4" rear waterway inlet with pressure gauge and long handled chrome cap dd. Minimum 4" waterway discharge with 4" valve with handwheel or electric control on pump panel ee. Waterway relief valve and minimum 1.5" drain at rear of apparatus ff. Stabilizer controls and stabilizer to aerial controls mounted on rear of apparatus body gg. One (1) high intensity spotlights on ladder tip hh. Two high intensity flood lights on ladder base ii. Painted finish on steel aerial -bidder shall provide copy of paint warranty on aerial j j . Instruction plates and signs must be installed per NFPA 1901 Chapter 19.23 6. FIRE PUMP & PLUMBING a. Minimum 1500 GPM pump as rated per NFPA 1901 Chapter 16 b. Air operated pump shift C. Discharge pressure relief valve d. Intake pressure relief valve e. Master drain valve f. Electric dry type primer TR 12430- Exhibit D Base Specifications #08 - 100" Rear Mounted Aerial Apparatus g. Pump panel lights, 3 each side h. Pump compartment light i. OK to pump lights in cab and at pump pane j . Engine cooler k. Pump cooler 1. Two (2) 6" steamers, one on side panel m. 2.5" left side gated suction n. 1.5" tank fill o. Two (2) 2" crosslay hose beds over the pump compartment p. Two (2) 2-1/2"' left side discharges q. Two (2) 2-1/2" right side discharges r. Stainless steel schedule 40 piping with 10 year warranty S. Panel gauge package: water tank level, tach, oil pressure, water temperature, voltmeter, light and alarm system t. Minimum 300 gallon polypropylene booster tank with lifetime warranty u. 3" tank to pump connection V. Minimum 10" x 8" fill tower with minimum 4" overflow tube w. 15 ft. of soft suction hose sized for capacity of fire pump 7. APPARATUS BODY a. Bidders to bid on each of their offered construction types: • Extruded aluminum • Formed aluminum • Formed galvanneal steel • Formed stainless steel b. Bidders to state thicknesses, alloys and construction methods of all materials used in body construction C. High left side compartments d. High right side compartments e. Bidders to accurately state the total cubic footage of compartment space, along with each compartment size f. Lights in compartments to meet NFPA 1901 Chapter 13.10.5 g. Hose bed lighting must be provided per NFPA Chapter 1901 13.10.2 h. Back up alarm i. Rear ladder storage for minimum 11 5'NFPA ground ladders fully enclosed at rear of apparatus, ladders to be included j . Rear pike pole storage for minimum of six (6) pike poles fully enclosed at rear of apparatus k. Slide out pump operator platform 1. Hose bed with hose restraints to be NFPA quint compliant m. Steps and handrails for climbing from ground to turntable - bidders to state exact design n. Lights at each step o. Stop/turn/back up lights p. DOT clearance and marker lights q. License plate light r. Rear deck lights S. Rub rail along each side of body t. Running boards at each pump panel u. Brushed stainless steel or black non -glare aluminum pump panels TR 12430- Exhibit D Base Specifications #08 - 100' Rear Mounted Aerial Apparatus A a EMERGENCY WARNING a. NFPA Zone A lower and upper level lighting b. NFPA Zone B / D lower level lighting C. NFPA Zone C upper and lower level lighting d. Electronic 200 watt siren/PA with minimum PAINT FINISH / REFLECTIVE STRIPING 100 watt speaker recessed in bumper a. Cab and body to be painted single tone with 10 year pro -rated paint and corrosion perforation warranty b. Wheels painted to match the cab and body C. Reflective striping in accordance with Chapter 15.9.3 d. Reflective chevron on rear of apparatus in accordance with Chapter 10. WARRANTY 15.9.3.2. a. 1 year bumper to bumper mechanical, excluding normal wear and tear items b. 10 year cab and body structural C. 10 year paint pro -rated d. 10 year corrosion perforation on cab and body e. 20 year aerial structural f. Lifetime frame warranty g. 2 year front axle h. 2 year rear axle J . 5 year fire pump k. Lifetime booster tank 1. Manufacturer's standard 5 year warranty for transmission TR 12430- Exhibit D FLORIDA}-/.yzj7 fj N OF COUNTIES All About Norida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 100' REAR MOUNTED AERIAL APPARATUS Specification (Extruded Aluminum Body - #08 Aluminum Ladder) The 100' Rear Mounted Aerial Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: E-ONE HP 100L BASE PRICE: $6939366.00 MANUFACTURER: Hall -Mark Fire Apparatus (E-ONE) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a quint apparatus with a special emphasis on Chapters 1, 29 39 4, 8, 12, 13, 149 159, 16, 189 19, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA. COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 100' REAR MOUNTED AERIAL APPARATUS Specification #08 (Extruded Aluminum Body - Steel Ladder) The 100' Rear Mounted Aerial Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: MANUFACTURER: MODEL: BASE PRICE: MANUFACTURER: Crimson 100RMA $674, 072.00 Crimson Fire (Public Safety... ) Spectr $6319 376. 00 Ferrara Fire Apparatus, Inc. Igniter XD $6629036.00 Ferrara Fire Apparatus, Inc. Spartan Gladiator 100' $652, 394.00 Rosenbauer South Dakota, LLC While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a quint apparatus with a special emphasis on Chapters 1, 29, 3, 4, 8, 12, 139 14, 15, 16, 189, 19, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D yF� iq �(��y ..OR.IQ/}Ig JA COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIEITION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 100' REAR MOUNTED AERIAL APPARATUS Specification #08 (Formed Aluminum Body - Aluminum Ladder) The 100' Rear Mounted Aerial Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: Pierce Arrow XT HDL BASE PRICE: $6659 648.00 MANUFACTURER: Pierce Manufacturing, Inc. While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a quint apparatus with a special emphasis on Chapters 1, 29 39 4, 89 129 139 149 159 169 189 199 FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA. COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIEITION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 100' REAR MOUNTED AERIAL APPARATUS Specification #08 (Formed Aluminum Body - Steel Ladder) The 100' Rear Mounted Aerial Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: MANUFACTURER: MODEL: BASE PRICE: MANUFACTURER: American LaFrance 100RMA $7500442.00 American LaFrance, LLC Pierce Arrow XT HDL $6539206.00 Pierce Manufacturing, Inc. KME Predator AerialCat FLOS 103 $667,1 80.00 Kovatch Mobile Equip. Corp. (KME) Spartan Gladiator 100' $6201,852.00 Rosenbauer South Dakota, LLC While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a quint apparatus with a special emphasis on Chapters 1, 2, 39 41 8, 129 139 149 159 161, 18, 19, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION 8c FLORIDA ASSOCIATION OF COUNTIES 2012 100' REAR MOUNTED AERIAL APPARATUS Specification #08 (Formed Stainless Steel Body -Aluminum Ladder) The 100' Rear Mounted Aerial Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: Pierce Arrow XT HAL-SS BASE PRICE: $6739 564.00 MANUFACTURER: Pierce Manufacturing, Inc. While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a quint apparatus with a special emphasis on Chapters 1, 29, 39 4, 8, 12, 139 149 15, 16, 189 19, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASSOCIATION OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION 8c FLORIDA ASSOCIATION OF COUNTIES 2012 100' REAR MOUNTED AERIAL APPARATUS Specification #08 (Formed Stainless Steel Body - Steel Ladder) The 100' Rear Mounted Aerial Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: MANUFACTURER: American LaFrance 100RMA $7539942.00 American LaFrance, LLC Crimson 100RMA $6779950.00 Crimson Fire (Public Safety...) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a quint apparatus with a special emphasis on Chapters 1, 29 3, 4, 8, 129 13, 14, 15, 160 189 19, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASR)CLMON OF COUNTIES All About ;Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES Base Specifications 11 NT AERIAL PLATFORM ALL ITEMS FACTORY INSTALLED UNLESS OTHERWISE INDICATED THE CAB AND CHASSIS SHALL BE PROVIDED BY THE BODY MANUFACTURER 1. DOCUMENTATION. DELIVERY. TRAINING a. When requested by end user, bidders to accurately state wheelbase, cab to axle, overall length, bumper swing turn radius, curb -to -curb turning radius, overall height, overall width, GVWR, angle of approach, angle of departure and SCAAN certification for drivetrain compatibility in submitted specifications b. Approval drawings provided prior to construction commencement C. Two (2) sets of operator and service manuals d. Delivery to be F.O.B. customer's location e. Three (3) days of training by employee of manufacturer f. Pump test certification by independent third party g. Water tank capacity certification by independent third party h. Aerial non-destructive, waterway flow test, performance and stability testing by independent third party i. 12 volt and, if applicable, 110 volt testing by independent third party j . Vehicle weight, as measured by certified scales 2. CHASSIS a. 110,000 psi heat treated steel frame rail with full length inner 110,000 psi C-channel liner or integral torque box frame b. 10 gauge polished stainless steel 16" to 24" extended front bumperwith aluminum diamond plate gravel shield c. Tow hooks or eyes front and rear attached to the frame d. 22,500 pound minimum front axle, suspension, tubeless radial tires, steel disc wheels e. 52,000 pound minimum rear axle, suspension, tubeless radial tires, steel disc wheels f. Front and rear mud flaps g. NFPA 1901 Chapter 4.15.3 top speed rating requirement TR 12430- Exhibit D Base Specifications #09 -Mid Mounted Aerial Platform h. S-cam air brakes or equivalent, as large as possible, with automatic slack adjusters i. Manufacturer's standard compressor j . Minimum 5000 cubic inch air reservoir capacity k. Air dryer, color coded air lines, turn drain valves on reservoirs 1. ABS brakes m. Power steering with tilt/telescopic wheel n. Vehicle data recorder (VDR) in compliance with Chapter 4.11 with required software meeting 4.11.8 o. Electronic Stability Control shall be provided in compliance with NFPA 1901 Chapter 4.13.1.2 if the manufacturer cannot comply with Chapters 4.13.1.1 through 4.13.1.1.3.2. p. Tire pressure monitoring system with Chapter 4.13.4 3. POWERTRAIN a. Minimum 450 horsepower turbocharged diesel engine with 1450 ft. lb. torque rating b. Engine exhaust at front of right rear wheels C. Secondary braking to meet NFPA d. Engine manufacturer's statement of engine installation approval with approved cooling system e. Drivelines to meet engine torque rating f. Silicone coolant hoses with constant torque clamps g. EVS 4000 automatic transmission h. 50 gallon minimum fuel tank i. OEM oil, fuel, transmission filters 4. CAB a. Medium length tilt aluminum cab meeting NFPA 1901 Chapter 14.3.2 b. Seating for four, three in SCBA seats with SCBA brackets c. Air ride driver seat, all others fixed position d. All persons in 3-point seat belts per Chapter 14, seats equipped with seat belt/occupant detection/warning system per Chapter 14 e. Electric over hydraulic cab tilt with manual back-up f. Single tone cab paint finish with 10 year paint warranty pro -rated g. Air conditioning and heating h. Remote controlled mirrors (from driver's position) with separate flat and convex sections i. DOT compliant headlights j . Forward facing turn and warning lights k. Cornering turn and warning lights 1. Minimum four (4) dome lights with red and clear bulbs m. Minimum four (4) under cab step lights n. Cab and compartment door ajar light and buzzer o. One (1) engine compartment light p. Color coded and function coded wiring q. Alternator sized according to amp draw report r. Minimum four (4) 750 CCA batteries S. Load manager with automatic high idle function t. Dual air horns with dual in -cab controls 5. AERIAL APPARATUS - ALUMINUM OR STEEL a. Aerial shall meet or exceed all sections of NFPA 1901 Chapter 19 TR 12430- Exhibit D Base Specifications #09 -Mid Mounted Aerial Platform b. Ladder material: aluminum or steel C. Mid -mounted configuration d. 4-section or 5-section aerial with minimum elevation of 95" per NFPA requirements e. Rated horizontal reach per NFPA requirements f. Rungs shall meet all aspects of NFPA 1901 19.2.5 g. Rungs equipped with a slip resistant surface meeting NFPA 1901 19.2.5 h. Rungs spacing meeting NFPA 1901 19.2.5 i. Turntable with pedestal mounted controls meeting NFPA 1901 19.4 j . Platform rated load capacity not flowing water: 1000 lbs. plus equipment k. Platform rated load capacity while flowing 1000 gpm: 500 lbs. in addition to permanently affixed equipment 1. Rated load capacities shall meet and / or exceed NFPA 1901 19.3 m. The aerial shall be rated in multiple configurations per Chapter 19.3.4 n. Extend/retract, rotate and hydraulic or electric over hydraulic controls meeting NFPA 1901 19.5 through 19.5.3.6. o. Hydraulic pressure gauge at turntable controls p. Illuminated Angle of Elevation Indicator meeting NFPA 1901 19.4.1 q. Flowmeter on turntable control pedestal meeting NFPA 1901 19.6.8 r. All aerial control devices shall meet NFPA 1901 19.17 S. Fall protection provisions shall be provided.` t. Bidders to state type of stabilizers and overall stabilizers spread u. Aerial shall meet structural safety factors in accordance with NFPA 1901 19.20 V. Aerial shall meet NFPA 1901 stability safety factors Chapter 19.21 w. Lighted turntable area x. The aerial manufacturer (the company that manufacturers the entire aerial device) shall maintain a Quality Control Program in accordance with NFPA 1901 Chapter 19.22 y. Special attention shall be paid to meeting all safety requirements per NFPA 1901 19.20 Z. Aerial shall be fully tested and certified by third party certified testing company per NFPA 1901 19.24 and 19.25 aa. 2-way intercom system between ladder tip and turntable control pedestal. bb. Minimum 1000 gpm waterway system meeting NFPA 1901 with remote control nozzle (controls in platform and at turntable control pedestal). cc. Minimum 4" rear or side waterway inlet with pressure gauge and long handled chrome cap dd. Minimum 4" waterway discharge with 4" valve with handwheel or electric control on pump panel ee. Waterway relief valve and minimum 1.5" drain ff. Stabilizer controls and stabilizer to aerial controls mounted on center or rear of apparatus body gg. One (1) high intensity spotlights on ladder tip hh. Two high intensity flood lights on ladder base ii. Painted finish on steel aerial -bidder shall provide copy of paint warranty on aerial .11. Instruction plates and signs must be installed per NFPA 1901 Chapter 19.23 kk. Platform construction and design must meet NFPA 1901 Chapter 19.7.6 11. Platform operating positions must meet NFPA 1901 Chapter 19.9 6. FIRE PUMP & PLUMBING a. Minimum 1500 GPM pump as rated per NFPA 1901 b. Air operated pump shift C. Discharge pressure relief valve d. Intake pressure relief valve Chapter 16 TR 12430- Exhibit D Base Specifications #09 - Mid Mounted Aerial Platform e. Master drain valve f. Electric dry type primer g. Pump panel lights, 3 each side h. Pump compartment light i. OK to pump lights in cab and at pump panel j . Engine cooler k. Pump cooler 1. Two (2) 6" steamers, one on side panel m. 2.5" left side gated suction n. 1.5" tank fill o. Two (2) 2" crosslay hose beds over the pump compartment p. Two (2) 2-1/2" left side discharges q. Two (2) 2-1/2" right side discharges r. Stainless steel schedule 40 piping with 10 year warranty S. Panel gauge package: water tank level, tach, oil pressure, water temperature, voltmeter, light and alarm system t. Minimum 300 gallon polypropylene booster tank with lifetime warranty V. 3" tank to pump connection V. Minimum 10" x 8" fill tower with minimum 4" overflow tube W. 15 ft. of soft suction hose sized for capacity of fire pump 7. APPARATUS BODY a. Bidders to bid on each of their offered construction types: • Extruded aluminum • Formed aluminum • Formed galvanneal steel • Formed stainless steel b. Bidders to state thicknesses, alloys and construction methods of all materials used in body construction C. Maximum number of left side compartments available d. Maximum number of right side compartments available e. Bidders to accurately state the total cubic footage of compartment space, along with each compartment size f. Lights in compartments to meet NFPA 1901 Chapter 13.10.5 g. Hose bed lighting must be provided per NFPA Chapter 1901 13.10.2 h. Back up alarm i. Rear ladder storage for minimum 115' NFPA ground ladders fully enclosed at rear of apparatus, ladders to be included j . Rear pike pole storage for minimum of six (6) pike poles fully enclosed at rear of apparatus k. Slide out pump operator platform 1. Hose bed with hose restraints to be NFPA quint compliant m. Steps and handrails for climbing from ground to turntable - bidders to state exact design n. Lights at each step o. Stop/turn/back up lights p. DOT clearance and marker lights q. License plate light r. Rear deck lights S. Rub rail along each side of body t. Running boards at each pump panel u. Brushed stainless steel or black non -glare aluminum pump panels TR 12430- Exhibit D Base Specifications #09 -Mid Mounted Aerial Platform 9. EMERGENCY WARNING a. NFPA Zone A lower and upper level lighting b. NFPA Zone B / D lower level lighting C. NFPA Zone C upper and lower level lighting d. Electronic 200 watt siren/PA with minimum PAINT FINISH/REFLECTIVE STRIPING 100 watt speaker recessed in bumper a. Cab and body to be painted single tone with 10 year pro -rated paint and corrosion perforation warranty b. Wheels painted to match the cab and body C. Reflective striping in accordance with Chapter 15.9.3 d. Reflective chevron on rear of apparatus in accordance with Chapter 10. WARRANTY 15.9.3.2. a. 1 year bumper to bumper mechanical, excluding normal wear and tear items b. 10 year cab and body structural C. 10 year paint pro -rated d. 10 year corrosion perforation on cab and body e. 20 year aerial structural f. Lifetime frame warranty g. 2 year front axle h. 2 year rear axle i. 5 year fire pump j . Lifetime booster tank k. Manufacturer's standard 5 year warranty for transmission TR 12430- Exhibit D FLORIDA COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 bIID MOUNTED AERIAL PLATFORM Specification #09 (Extruded Aluminum Body - Aluminum Ladder) The Mid Mounted Aerial Platform, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: E-ONE HP 95 MM BASE PRICE: $8499613.00 MANUFACTURER: Hall -Mark Fire Apparatus (E-ONE) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a quint apparatus with a special emphasis on Chapters 1, 2, 3, 4, 8, 12, 139 14, 15, 169 18, 19, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA .ASSOCIATION OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION 8c FLORIDA ASSOCIATION OF COUNTIES 2012 MID MOUNTED AERIAL PLATFORM Specification #09 (Extruded Aluminum Body - Steel Ladder) The Mid Mounted Aerial Platform, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: MANUFACTURER: MODEL: BASE PRICE: MANUFACTURER: Crimson MM 100' $854, 583.00 Crimson Fire (Public Safety...) Spectr $8449351.00 Ferrara Fire Apparatus, Inc. Igniter XD $8689463.00 Ferrara Fire Apparatus, Inc. Spartan Gladiator $7989554.00 Rosenbauer South Dakota, LLC While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a quint apparatus with a special emphasis on Chapters 1, 2, 3, 49 89 12, 139 14, 15, 169 18, 19, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASSOCIN-noN or, COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIEITION & FLORIDA ASSOCIATION OF COUNTIES 2012 MID MOUNTED AE PLATFORM Specification #09 (Formed Aluminum Body - Steel Ladder) The Mid Mounted Aerial Platform, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: MANUFACTURER: MODEL: BASE PRICE: MANUFACTURER: American LaFrance 100MMP $886, 602.00 American LaFrance, LLC Pierce Arrow XT Mid Mount $8949531.00 Pierce Manufacturing, Inc. KME Predator AerialCat FLO9100 $8309497.00 Kovatch Mobile Equip. Corp. (KME) Spartan Gladiator $780, 512.00 Rosenbauer South Dakota, LLC While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a quint apparatus with a special emphasis on Chapters 1, 2, 31 41, 8, 12, 139 149 15, 169 189 191, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA $ >�'�yrLpq{ C)jjl�y�.IlyyJil \A�(¢ i hti3•.F'Fn :��0.J iTIO t Y.vR• COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 MID MOUNTED AERIAL PLATFORM Specification #09 (Formed Stainless Steel Body - Aluminum Ladder) The Mid Mounted Aerial Platform, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: MANUFACTURER: SPH 100 $9699128.00 Sutphen Corporation SP110 $190149357.00 Sutphen Corporation While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a quint apparatus with a special emphasis on Chapters 1, 2, 39 4, 8, 129 139 149 159, 10, 18, 19, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA AS,SOCIATION Of COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 MID MOUNTED AERIAL PLATFORM Specification #09 (Formed Stainless Steel Body - Steel Ladder) The Mid Mounted Aerial Platform, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and. FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: American LaFrance 100MMP Crimson MM 1009 BASE PRICE: $8919 503.00 $858, 330.00 MANUFACTURER: American LaFrance, LLC Crimson Fire (Public Safety...) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a quint apparatus with a special emphasis on Chapters 1, 29 30 49 81 12, 13, 149 15, 16, 189, 19, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. I TR 12430- Exhibit D FLORIDA COUNTIES All About Norida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES Base Specifications TI AERIAL PLATFORM ALL ITEMS FACTORY INSTALLED UNLESS OTHERWISE INDICATED THE CAB AND CHASSIS SHALL BE PROVIDED BY THE BODY MANUFACTURER 1. DOCUMENTATION. DELIVERY. TRAINING a. when requested by end user, bidders to accurately state wheelbase, cab to axle, overall length, bumper swing turn radius, curb -to -curb turning radius, overall height, overall width, GVWR, angle of approach, angle of departure and SCAAN certification for drivetrain compatibility in submitted specifications b. Approval drawings provided prior to construction commencement C. Two (2) sets of operator and service manuals d. Delivery to be F.O.B. customer's location e. Three (3) days of training by employee of manufacturer f. Pump test certification by independent third party g. Water tank capacity certification by independent third party h. Aerial non-destructive, waterway flow test, performance and stability testing by independent third party i. 12 volt and, if applicable, 110 volt testing by independent third party j . Vehicle weight, as measured by certified scales 2. CHASSIS a. 110,000 psi heat treated steel frame rail with full length inner 110,000 psi C-channel liner or integral torque box frame b. 10 gauge polished stainless steel 16" to 24" extended front bumper with aluminum diamond plate gravel shield c. Tow hooks or eyes front and rear attached to the frame d. 20,000 pound minimum front axle, suspension, tubeless radial tires, steel disc wheels e. 50,000 pound minimum rear axle, suspension, tubeless radial tires, steel disc wheels f. Front and rear mud flaps g. NFPA 1901 Chapter 4.15.3 top speed rating requirement TR 12430- Exhibit D Base Specifications # I 0 - Rear Mounted Aerial Platform h. S-cam air brakes or equivalent, as large as possible, with automatic slack adjusters i. Manufacturer's standard compressor j . Minimum 5000 cubic inch air reservoir capacity k. Air dryer, color coded air lines, turn drain valves on reservoirs 1. ABS brakes m. Power steering with tilt/telescopic wheel n. Vehicle data recorder (VDR) in compliance with Chapter 4.11 with required software meeting 4.11.8 o. Electronic Stability Control shall be provided in compliance with NFPA 1901 Chapter 4.13.1.2 if the manufacturer cannot comply with Chapters 4.13.1.1 through 4.13.1.1.3.2. p. Tire pressure monitoring system with Chapter 4.13.4 3. POWERTRAIN a. Minimum 450 horsepower turbocharged diesel engine with 1450 ft. lb. torque rating b. Engine exhaust at front of right rear wheels C. Secondary braking to meet NFPA d. Engine manufacturer's statement of engine installation approval with approved cooling system e. Drivelines to meet engine torque rating f. Silicone coolant hoses with constant torque clamps g. EVS 4000 automatic transmission h. 50 gallon minimum fuel tank i. OEM oil, fuel, transmission filters 4. CAB a. Medium length tilt aluminum cab meeting NFPA 1901 Chapter 14.3.2 b. Seating for four, three in SCBA seats with SCBA brackets C. Air ride driver seat, all others fixed position d. All persons in 3-point seat belts per Chapter 14, seats equipped with seat belt/occupant detection/warning system per Chapter 14 e. Electric over hydraulic cab tilt with manual back-up f. Single tone cab paint finish with 10 year paint warranty pro -rated g. Air conditioning and heating h. Remote controlled mirrors (from driver's position) with separate flat and convex sections i. DOT compliant headlights j . Forward facing turn and warning lights k. Cornering turn and warning lights 1. Minimum four (4) dome lights with red and clear bulbs m. Minimum four (4) under cab step lights n. Cab and compartment door ajar light and buzzer o. One (1) engine compartment light p. Color coded and function coded wiring q. Alternator sized according to amp draw report r. Minimum four (4) 750 CCA batteries S. Load manager with automatic high idle function t. Dual air horns with dual in -cab controls 5. AERIAL APPARATUS - ALUMINUM OR STEEL a. Aerial shall meet or exceed all sections of NFPA 1901 Chapter 19 TR 12430- Exhibit D Base Specifications #10 -Rear Mounted Aerial Platform b. Ladder material: aluminum or steel C. Rear -mounted configuration d. Minimum 3-section aerial with minimum elevation of 100' per NFPA requirements e. Rated horizontal reach per NFPA requirements f. Rungs shall meet all aspects of NFPA 1901 19.2.5 g. Rungs equipped with a slip resistant surface meeting NFPA 1901 19.2.5 h. Rungs spacing meeting NFPA 1901 19.2.5 i. Turntable with pedestal mounted controls meeting NFPA 1901 19.4 J . Platform rated load capacity not flowing water: 1000 lbs. plus equipment k. Platform rated load capacity while flowing 1000 gpm: 500 lbs. in addition to permanently affixed equipment 1. Rated load capacities shall meet and /or exceed NFPA 1901 19.3 m. The aerial shall be rated in multiple configurations per Chapter 19.3.4 n. Extend/retract, rotate and hydraulic or electric over hydraulic controls meeting NFPA 1901 19.5 through 19.5.3.6. o. Hydraulic pressure gauge at turntable controls p. Illuminated Angle of Elevation Indicator meeting NFPA 1901 19.4.1 q. Flowmeter on turntable control pedestal meeting NFPA 1901 19.6.8 r. All aerial control devices shall meet NFPA 1901 19.17 S. Fall protection provisions shall be provided. t. Bidders to state type of stabilizers and overall stabilizers spread u. Aerial shall meet structural safety factors in accordance with NFPA 1901 19.20 V. Aerial shall meet NFPA 1901 stability safety factors Chapter 19.21 w. Lighted turntable area X. The aerial manufacturer (the company that manufacturers the entire aerial device) shall maintain a Quality Control Program in accordance with NFPA 1901 Chapter 19.22 y. Special attention shall be paid to meeting all safety requirements per NFPA 1901 19.20 Z. Aerial shall be fully tested and certified by third party certified testing company per NFPA 1901 19.24 and 19.25 aa. 2-way intercom system between ladder tip and turntable control pedestal. bb. Minimum 1000 gpm waterway system meeting NFPA 1901 with remote control nozzle (controls in platform and at turntable control pedestal). cc. Minimum 4" rear waterway inlet with pressure gauge and long handled chrome cap dd. Minimum 4" waterway discharge with 4" valve with handwheel or electric control on pump panel ee. Waterway relief valve and minimum 1.5" drain at rear of apparatus ff. Stabilizer controls and stabilizer to aerial controls mounted on rear of apparatus body gg. One (1) high intensity spotlights on ladder tip hh. Two high intensity flood lights on ladder base ii. Painted finish on steel aerial -bidder shall provide copy of paint warranty on aerial jj . Instruction plates and signs must be installed per NFPA 1901 Chapter 19.23 kk. Platform construction and design must meet NFPA 1901 Chapter 19.7.6 11. Platform operating positions must meet NFPA 1901 Chapter 19.9 6. FIRE PUMP & PLUMBING a. Minimum 1500 GPM pump as rated per NFPA 1901 Chapter 16 b. Air operated pump shift C. Discharge pressure relief valve d. Intake pressure relief valve e. Master drain valve TR 12430- Exhibit D Base Specifications # 10 - Rear Mounted Aerial Platform f. Electric dry type primer g. Pump panel lights, 3 each side h. Pump compartment light i. OK to pump lights in cab and at pump panel j . Engine cooler k. Pump cooler 1. Two (2) 6" steamers, one on side panel m. 2.5" left side gated suction n . 1.5" tank fill o. Two (2) 2" crosslay hose beds over the pump compartment p. Two (2) 2-1/2" left side discharges q. Two (2) 2-1/2" right side discharges r. Stainless steel schedule 40 piping with 10 year warranty S. Panel gauge package: water tank level, tach, oil pressure, water temperature, voltmeter, light and alarm system t. Minimum 300 gallon polypropylene booster tank with lifetime warranty u. 3" tank to pump connection V. Minimum 10" x 8" fill tower with minimum 4" overflow tube W. 15 ft. of soft suction hose sized for capacity of fire pump 7. APPARATUS BODY a. Bidders to bid on each of their offered construction types: • Extruded aluminum • Formed aluminum • Formed galvanneal steel • Formed stainless steel b. Bidders to state thicknesses, alloys and construction methods of all materials used in body construction C. High left side compartments d. High right side compartments C. Bidders to accurately state the total cubic footage of compartment space, along with each compartment size f. Lights in compartments to meet NFPA 1901 Chapter 13.10.5 g. Hose bed lighting must be provided per NFPA Chapter 1901 13.10.2 h. Back up alarm i. Rear ladder storage for minimum 115' NFPA ground ladders fully enclosed at rear of apparatus, ladders to be included j . Rear pike pole storage for minimum of six (6) pike poles fully enclosed at rear of apparatus k. Slide out pump operator platform 1. Hose bed with hose restraints to be NFPA quint compliant m. Steps and handrails for climbing from ground to turntable - bidders to state exact design n. Lights at each step o. Stop/turn/back up lights p. DOT clearance and marker lights q. License plate light r. Rear deck lights S. Rub rail along each side of body t. Running boards at each pump panel U. Brushed stainless steel or black non -glare aluminum pump panels TR 12430- Exhibit D Base Specifications #10 -Rear Mounted Aerial Platform 0 9. EMERGENCY WARNING a. NFPA Zone A lower and upper level lighting b. NFPA Zone B / D lower level lighting C. NFPA Zone C upper and lower level lighting d. Electronic 200 watt siren/PA with minimum PAINT FINISH /REFLECTIVE STRIPING 100 watt speaker recessed in bumper a. Cab and body to be painted single tone with 10 year pro -rated paint and corrosion perforation warranty b. Wheels painted to match the cab and body C. Reflective striping in accordance with Chapter 15.9.3 d. Reflective chevron on rear of apparatus in accordance with Chapter 10. WARRANTY 15.9.3.2. a. 1 year bumper to bumper mechanical, excluding normal wear and tear items b. 10 year cab and body structural C. 10 year paint pro -rated d. 10 year corrosion perforation on cab and body e. 20 year aerial structural f. Lifetime frame warranty g. 2 year front axle h. 2 year rear axle i. 5 year fire pump j . Lifetime booster tank k. Manufacturer's standard 5 year warranty for transmission TR 12430- Exhibit D FLORIDA c- COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 REAR MOUNTED AERIAL PLATFORM Specification # 10 (Extruded Aluminum Body - Aluminum Ladder) The Rear Mounted Aerial Platform, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: E-ONE HP 100P BASE PRICE: $8209298.00 MANUFACTURER: Hall -Mark Fire Apparatus (E-ONE) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a quint apparatus with a special emphasis on Chapters 1, 29 39 49 8, 129 139 149 159 16, 18, 199 FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA. ASSOCLMOX OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 REAR MOUNTED AERIAL PLATFORM Specification # 10 (Extruded Aluminum Body -Steel Ladder) The Rear Mounted Aerial Platform, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: MANUFACTURER: MODEL: BASE PRICE: MANUFACTURER: Crimson Star RM 100' $7569389.00 Crimson Fire (Public Safety... ) Spectr $7299318.00 Ferrara Fire Apparatus, Inc. Igniter XD $7639430.00 Ferrara Fire Apparatus, Inc. Spartan Gladiator $734,810.00 Rosenbauer South Dakota, LLC While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a quint apparatus with a special emphasis on Chapters 1, 2, 39 49 8, 12, 139 149 159, 169, 189 19, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA A.ISSOCLIV-1,10N.- OF COUNTIES All About Florida FLORIDA FIRE CHIEFS9 ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 REAR MOUNTED AERIAL PLATFORM Specification # 10 (Formed Aluminum Body - Aluminum Ladder) The Rear Mounted Aerial Platform, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: Pierce Arrow XT Rear Mount PAP BASE PRICE: $8509 581.00 MANUFACTURER: Pierce Manufacturing, Inc. While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a quint apparatus with a special emphasis on Chapters 1, 29 3, 49 8, 12, 139 149, 15, 169 189 19, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA 11.15OCTNnON. OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 REAR MOUNTED AERIAL PLATFORM Specification # 10 (Formed Aluminum Body - Steel Ladder) The Rear Mounted Aerial Platform, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: MANUFACTURER: MODEL: BASE PRICE: MANUFACTURER: American LaFrance 100RMP $7889,974.00 American LaFrance, LLC Pierce Arrow XT Rear Mount PAP $799, 259.00 Pierce Manufacturing, Inc. KME Predator AerialCat FLO10102 $7919 297.00 Kovatch Mobile Equip. Corp. (KME) Spartan Gladiator $7109125.00 Rosenbauer South Dakota, LLC While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a quint apparatus with a special emphasis on Chapters 1, 29, 39 49 8, 129 139 149 159 16, 189, 19, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASSOCIATION OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION 8c FLORIDA ASSOCIATION OF COUNTIES 2012 REAR MOUNTED AERIAI, PLATFORM Specification # 10 (Formed Stainless Steel Body - Steel Ladder) The Rear Mounted Aerial Platform, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: American LaFrance 100RMP Crimson Star RM 100" BASE PRICE: $7929399.00 $7609631.00 MANUFACTURER: American LaFrance, LLC Crimson Fire (Public Safety...) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a quint apparatus with a special emphasis on Chapters 1, 29 39 4, 8, 129 139 14, 159 169 18, 19, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA A'S"SOCINTION OF COUNTIES All About Norida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES Base Specifications TION # I I - MEDII ALL ITEMS FACTORY INSTALLED UNLESS OTHERWISE INDICATED FREIGHTLINER, INTERNATIONAL OR APPROVED EQUIVALENT 1. DOCUMENTATION. DELIVERY. TRAINING a. When requested by end user, bidders to accurately state wheelbase, cab to axle, overall length, overall height, overall width, GVWR, angle of approach, angle of departure b. Approval drawings provided prior to construction commencement C. Two (2) sets of operator and service manuals d. Delivery to be F.O.B. customer's location e. Vehicle orientation as outlined in NFPA 1901 f. 12 volt and, if applicable, 110 volt testing by independent third party g. Vehicle weight, as measured by certified scales 2. COMMERCIAL 2-DOOR CHASSIS a. Two wheel drive; minimum 108" cab to axle b. 110,000 psi heat treated steel frame rail system C. 12,000 pound minimum front axle, suspension, tubeless radial tires, steel disc wheels; 23,000 pound minimum rear axle, suspension, tubeless radial tires, steel disc wheels d. Vehicle Data Recorder per Chapter 4.11 with required software e. Electronic Stability Control shall be provided in compliance with NFPA 1901 Chapter 4.13.1.2 if the manufacturer cannot comply with Chapters 4.13.1.1 through 4.13.1.1.3.2. f. Tire pressure monitoring system per Chapter 4.13.4 g. Chrome or stainless steel front bumper h. Tow hooks or eyes front and rear attached to the frame i. Front and rear mud flaps j. S-cam air brakes or equivalent, as large as possible, with automatic slack adjusters k. Minimum 13.2 cfm gear driven air compressor 1. Air dryer, turn drain valves on reservoirs m. ABS brakes n. Power steering with tilt/telescopic wheel, if available TR 12430- Exhibit D Base Specifications #11 -Medium Duty Rescue Apparatus 3. POWERTFAIN a. Minimum 330 horsepower turbocharged diesel engine b. Engine exhaust at front of right rear wheels C. Secondary engine braking d. Drivelines to meet engine torque rating e. Automatic transmission f. 50 gallon minimum fuel tank g. OEM oil, fuel, transmission filters 4. 2-DOOR CAB a. Seating for three- (3), seats with NFPA compliant seat belts and seat belt warning system b. NFPA compliant 12-volt switches and instruments c. Air conditioning and heating d. Engine compartment light e. Dome/step lights meeting NFPA 1901 f. Single tone cab paint finish with OEM standard paint warranty g. Driver remote controlled mirrors with separate flat and convex sections h. Dual type headlights i. Forward facing turn and warning lights j . Minimum two (2) under cab step lights k. Cab and compartment door ajar light and buzzer 1. Engine compartment light m. 270 amp alternator n. Minimum two (2) 750 CCA batteries o. Load manager with automatic high idle function p. Dual air horns with dual in -cab controls q. 110 volt battery charger receptacle near driver's door S. APPARATUS BODY a. Bidders to bid on each of their offered construction types: • Extruded aluminum • Formed aluminum b. Minimum 15' body length (outside length, do not include rear step in 15' calculation of body length) non -walk-in type C. Body compartments shall be configured • Two (2) transverse compartment(s) forward of rear wheels • One (1) transverse compartment over rear axle each side • One (1) full depth/full height compartment behind rear axle one each side • One (1) full height x as deep as possible compartment on rear of body d. Bidder to state compartment sizes e. Minimum of 480 cubic feet of use able storage space f. Compartment lights per NFPA Chapter 13.10.5 g. License plate light h. One pair of 12-volt rear body upper scene lights per NFPA 1901 6. EMERGENCY WARNING a. NFPA 1901 upper and lower warning light package TR 12430- Exhibit D Base Specifications #11 -Medium Duty Rescue Apparatus b. Electronic siren with siren speaker 7. PAINT FINISH a. Cab OEM finish and body to be painted matching color b. Single tone cab paint finish C. Wheels painted to match the cab and body d. NFPA 1901 required reflective stripe, on cab and body sides on cab door inner panels, chevron stripe on rear of body 8. wARRANTY a. 1 year bumper to bumper mechanical, excluding normal wear and tear items b. OEM chassis manufacturer's standard warranty C. 10 year paint on body pro -rated . TR 12430- Exhibit D A7& FI..ORIDASSOCIATIONpA. COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 FREIGHTLINER M2406 Specification # 11 (Medium Duty Rescue Apparatus - 4g2) The Freightliner M2-106, Medium Duty Rescue Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: Crimson Star MR $15S 867.00 Extruded Aluminum Crimson Fire (Public Safety...) E-ONE REHN $1559999.00 Extruded Aluminum Hall -Mark Fire Apparatus (E-ONE) Rescue Force FLSIIFTLNR $1579500.00 Extruded Aluminum Wheeled Coach Industries, Inc. FFA 108 MDR Rescue $163,914.00 Extruded Aluminum Ferrara Fire Apparatus, Inc. FSA Rescue 11 $1789200.00 Extruded Aluminum Rosenbauer South Dakota, LLC While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a special service vehicle with a special emphasis on Chapters 1, 2, 3, 49 109 12, 13, 14, 15, 25 (if applicable), FWSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA. COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION 8c FLORIDA ASSOCIATION OF COUNTIES 2012 INTERNATIONAL DURASTAR Specification # 11 (Medium Duty Rescue Apparatus - 4g2) The International Durastar, Medium Duty Rescue Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: Crimson Star MR $162, 549.00 Extruded Aluminum Crimson Fire (Public Safety...) E-ONE REHN $1609899.00 Extruded Aluminum Hall -Mark Fire Apparatus (E-ONE) Rescue Force FLS 11INTL $1671,500.00 Extruded Aluminum Wheeled Coach Industries, Inc. FFA 108 MDR Rescue $1620379.00 Extruded Aluminum Ferrara Fire Apparatus, Inc. FSA Rescue 11 $1799018.00 Extruded Aluminum Rosenbauer South Dakota, LLC While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a special service vehicle with a special emphasis on Chapters 19 29 39 49 109 129 13, 14, 15, 25 (if applicable), FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA COUNTIES AU About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 FREIGHTLINER M2-106 Specification # 11 (Medium Duty Rescue Apparatus - 4g2) The Freightliner M2-106, Medium Duty Rescue Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: American LaFrance 16" W/AR KME FLIIMDR $1709316. 00 $169, 404.00 Formed Aluminum Formed Aluminum American LaFrance, LLC Kovatch Mobile Equip. Pierce MDR $1659411.00 Formed Aluminum Pierce Manufacturing, Inc. Toyne Medium Rescue $1989600.00 Formed Aluminum Toyne, Inc. (Southeastern... ) FSA Rescue 11 $1549442.00 Formed Aluminum Rosenbauer South Corp. (KME) Dakota, LLC While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a special service vehicle with a special emphasis on Chapters 1, 2, 3, 49 109 12, 13, 14, 15, 25 (if applicable), FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA 'ATION OF" COUNTIES All About Florida FLO DA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 INTERNATIONAL DURASTAR Specification # 11 (Medium Duty Rescue Apparatus - 4g2) The International Durastar, Medium Duty Rescue Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: American LaFrance $176, 390.00 Formed Aluminum American LaFrance, 16' W/AR LLC Pierce MDR $1749065.00 Formed Aluminum Pierce Manufacturing, Inc. KME FLI 1MDR $165 9 607. 00 Formed Aluminum Kovatch Mobile Equip. FSA Rescue 11 $155, 259.00 Formed Aluminum Rosenbauer South Corp. (KME) Dakota, LLC Sutphen CR Series Rescue Toyne Medium Rescue $2589980.00 $2049300.00 Formed Aluminum Formed Aluminum Sutphen Corporation Toyne, Inc. (Southeastern...) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a special service vehicle with a special emphasis on Chapters 1, 2, 39 49 109 129 139 149 15, 25 (if applicable), FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA COUNTIES Alt About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES T Base Specifications - HEAVY ALL ITEMS FACTORY INSTALLED UNLESS OTHERWISE INDICATED THE CAB AND CHASSIS SHALL BE PROVIDED BY THE BODY MANUFACTURER 1. DOCUMENTATION. DELIVERY. TRAINING a. When requested by end user, bidders to accurately state wheelbase, cab to axle, overall length, bumper swing turn radius, curb -to -curb turning radius, overall height, overall width, GVWR, angle of approach, angle of departure and SCAAN certification for drivetrain compatibility in submitted specifications b. Approval drawings provided prior to construction commencement C. Two' (2) sets of operator and service manuals d. Delivery to be F.O.B. customer's location e. Vehicle orientation as outlined in NFPA 1901 f. Pump test certification (if applicable) by independent third party g. Water tank capacity (if applicable) certification h. 12 volt and, if applicable, 110 volt testing by independent third party i. Vehicle weight, as measured by certified scales 2. CHASSIS a. 110,000 psi heat treated steel frame rail with full length inner 110,000 psi C-channel liner b. 10 gauge polished stainless steel 16" to 24" extended front bumper with aluminum diamond plate gravel shield C. Tow hooks or eyes front and rear attached to the frame d. 18,000 pound minimum front axle, suspension, tubeless radial tires, steel disc wheels e. 24, 000 pound minimum rear axle, suspension, tubeless radial tires, steel disc wheels f. Front and rear mud flaps g. NFPA 1901 Chapter 4.15.3 top speed rating requirement h. S-cam air brakes, as large as possible, with automatic slack adjusters i. Manufacturer's standard compressor j . Minimum 5000 cubic inch air reservoir capacity k. Air dryer, color coded air lines, turn drain valves on reservoirs TR 12430- Exhibit D Base Specifications #12 -Heavy Rescue Apparatus 1. ABS brakes m. Power steering with tilt/telescopic wheel n. Vehicle data recorder (VDR) in compliance with Chapter 4.11 with required software meeting 4.11.8 o. Electronic Stability Control shall be provided in compliance with NFPA 1901 Chapter 4.13.1.2 if the manufacturer cannot comply with Chapters 4.13.1.1 through 4.13.1.1.3.2, or model to have been tilt table tested and certified per Chapter 4.13.1.1.1 p. Tire pressure monitoring system with Chapter 4.13.4 3. POWERTRAIN a. Minimum 350 horsepower turbocharged diesel engine with 1000 ft. lb. torque rating b. Minimum EVS 3000 transmission C. Engine exhaust at front of right rear wheels d. Secondary braking to meet NFPA e. Engine manufacturer's statement of engine installation approval with approved cooling system f. Drivelines to meet engine torque rating g. Silicone coolant hoses with constant torque clamps h. 50 gallon minimum fuel tank i. OEM oil, fuel, transmission filters 4. CAB a. Medium length tilt aluminum cab meeting NFPA 1901 Chapter 14.3.2 b. Seating for four, three in SCBA seats with SCBA brackets C. Air ride driver seat, all others fixed position d. All persons in 3-point seat belts per Chapter 14, seats equipped with seat belt/occupant detection/warning system per Chapter 14 e. Electric over hydraulic cab tilt with manual back-up f. Single tone cab paint finish with 10 year paint warranty pro -rated g. Air conditioning and heating h. Remote controlled mirrors (from driver's position) with separate flat and convex sections i. DOT compliant headlights j . Forward facing turn and warning lights k. Cornering turn and warning lights 1. Minimum four (4) dome lights with red and clear bulbs m. Minimum four (4) under cab step lights n. Cab and compartment door ajar light and buzzer o. One (1) engine compartment light p. Color coded and function coded wiring q. Alternator sized according to amp draw report r. Minimum four (4) 750 CCA batteries S. Load manager with automatic high idle function t. Dual air horns with dual in -cab controls 5. APPARATUS BODY a. Bidders to bid on each of their offered construction types: • Extruded aluminum • Formed aluminum TR 12430- Exhibit D Base Specifications # 12 - Heavy Rescue Apparatus 6. 7. b. Minimum 18' body length (outside body length, do not include rear step in 18' body length calculation) non -walk-in type body C. Body compartments shall be configured • Two (2) transverse compartment(s) forward of rear wheels • One (1) transverse compartment over rear axle each side • One (1) full depth/full height compartment behind rear axle one each side • One (1) full height x as deep as possible compartment on rear of body d. Bidder to state compartment sizes e. Minimum of 520 cubic feet of use able storage space f. Compartment lights per NFPA Chapter 13.10.5 g. License plate light h. One pair of 12-volt rear body upper scene lights per NFPA 1901 i. Two (2) 12-volt upper side body scene lights per side (4 lights total) j . Minimum 10" rear step for access for rear storage compartment, step surface to meet NFPA 1901 requirements for slip -resistance, with NFPA compliant handrails EMERGENCY `]YARNING a. NFPA Zone A lower and upper level lighting b. NFPA Zone B / D lower level lighting C. NFPA Zone C upper and lower level lighting d. Electronic 200 watt siren/PA with minimum PAINT FINISH 100 watt speaker recessed in bumper a. Cab and body to be painted single tone b. Wheels painted to match the cab and body C. Minimum 4" reflective stripe on cab and body, 1901 chevron striping on rear of body per NFPA a. 1 year bumper to bumper mechanical, excluding normal wear and tear items b. 10 year cab and body structural C. 10 year paint pro -rated d. 10 year corrosion perforation on cab and body e. Lifetime frame warranty f. Manufacturer's standard warranty for front and rear axle g. 5 year engine h. Manufacturer's standard 5 year warranty for transmission i. 2 year fire pump (if applicable) j . Lifetime booster tank (if applicable) TR 12430- Exhibit D FLORIDA ASSOCIAJ10N OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 HEAVY RESCUE APPARATUS Specification # 12 (Extruded Aluminum Body) The Heavy Rescue Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: MANUFACTURER: MODEL: BASE PRICE: MANUFACTURER: MODEL: BASE PRICE: MANUFACTURER: Crimson Star HR $237,303.00 Crimson Fire (Public Safety... ) Intruder MFDXL $235, 984.00 Ferrara Fire Apparatus, Inc. Spartan Force $2479658.00 Rosenbauer South Dakota, LLC Igniter XD XMFD $271,243.00 Ferrara Fire Apparatus, Inc. E-ONE REHN Typhoon $244,925.00 Hall -Mark Fire Apparatus (E-ONE) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a special service vehicle with a special emphasis on Chapters 1, 29 3, 4, 109 129 13, 14, 15, 25 (if applicable), FWSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASS(XILIVRON Or" COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 HEAVY RESCUE APPARATUS Specification # 12 (Formed Aluminum Body) The Heavy Rescue Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: MANUFACTURER: MODEL: BASE PRICE: MANUFACTURER: MODEL: BASE PRICE: MANUFACTURER: American LaFrance $2739 887.00 American LaFrance, Pierce Saber HDR $2729561.00 18' W/ACR LLC Pierce Manufacturing, Inc. Sutphen R Series $355, 247.00 Sutphen Corporation KME Predator $267, 534.00 Kovatch Mobile Spartan Force $2299727.00 FL 12HDR Equip. Corp. (KME) Rosenbauer South Dakota, LLC Spartan Heavy Rescue $274,000.00 Toyne, Inc. (Southeastern...) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition) and all chapters that are appropriate for a special service vehicle with a special emphasis on Chapters 19 29 39 49 10, 129 13, 14, 159 25 (if applicable), FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above unit only. The Florida Fire Chiefs' of Counties have identified and ei items required to meet all curren referenced vehicle specification comes equipped as a base Association, Florida Sheriffs Association and Florida Association quipped the base unit with those specifications and equipment t NFPA. Since equipment needs and preferences vary from agency to agency, any additional options required or changes to the base by the purchaser shall be made through the manufacturer listed. are going to unit desired NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA SSOCIATIONOF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES Base Specifications WATER SUPPLY FIRE APPARATUS ALL ITEMS FACTORY INSTALLED UNLESS OTHERWISE INDICATED FREIGHTLINER, INTERNATIONAL OR APPROVED EQUIVALENT 1. DOCUMENTATION. DELIVERY. TRAINING a, When requested by end user, bidders to accurately state wheelbase, cab to axle, overall length, bumper swing turn radius, curb -to -curb turning radius, overall height, overall width, GVWR, angle of approach, angle of departure in submitted specifications b. Approval drawings provided prior to construction commencement C. Two (2) sets of operator and service manuals d. Delivery to be F.O.B. customer's location e. Pump test certification by independent third party f. Water tank capacity certification g. 12 volt and, if applicable, 110 volt testing by independent third party h. Vehicle weight, as measured by certified scales 2. COMMERCIAL 2-DOOR CHASSS a. Two wheel drive b. Upgraded electrical system for emergency vehicle use to include a minimum of two batteries, minimum alternator(s) output of 220 amps. C. 110,000 psi heat treated steel frame with full length inner C-channel liner d. 16, 000 pound minimum front axle, suspension, tubeless radial tires, steel disc wheels; 44, 000 pound minimum rear tandem axle, suspension, tubeless radial tires, steel disc wheels e. Vehicle Data Recorder per Chapter 4.11 with required software f. Electronic Stability Control shall be provided in compliance with NFPA 1901 Chapter 4.13.1.2 if the manufacturer cannot comply with Chapters 4.13.1.1 through 4.13.1.1.3.2. g. Tire pressure monitoring system per Chapter 4.13.4 h. Chrome or stainless steel front bumper L Tow hooks or eyes front and rear attached to the frame j . Front and rear mud flaps TR 12430- Exhibit D Base Specifications # 13 - 2500 Gaston Mobile Water Supply Fire Apparatus k. S-cam air brakes, as large as possible, with automatic slack adjusters 1. Minimum 13.2 cfm gear driven air compressor m. Air dryer, turn drain valves on reservoirs n. ABS brakes o. Power steering with tilt/telescopic wheel, if available 3. POWERTRAIN a. Minimum 330 horsepower turbocharged diesel engine b. Engine exhaust at front of right rear wheels C. Secondary engine braking to meet NFPA d. Drivelines to meet engine torque rating e. Automatic transmission f. 50 gallon minimum fuel tank g. OEM oil, fuel, transmission filters 4. 2-DOOR CAB a. Seating for two (2) - bucket style vinyl seats with NFPA compliant seat belts and seat belt warning system b. NFPA compliant 12-volt switches and instruments C. Air conditioning and heating d. Engine compartment light e. Dome/step lights meeting NFPA 1901 f. Single tone cab paint finish with OEM standard paint warranty g. Driver remote controlled mirrors with separate flat and convex sections h. Dual type headlights i. Forward facing turn and warning lights j . Minimum two (2) under cab step lights k. Cab and compartment door ajar light and buzzer 1. Engine compartment light m. 270 amp alternator n. Minimum two (2) 750 CCA batteries o. Load manager with automatic high idle function p. Dual air horns with dual in -cab controls q. 110 volt battery charger receptacle near driver's door 5. FIRE PUMP & PLUMBING a. Minimum 500 gpm midship mounted PTO pump per NFPA b. Discharge pressure relief valve C. Intake pressure relief valve d. Master drain valve C. Electric dry type primer f. Pump panel lights, 3 each side g. Pump compartment light h. OK to pump lights in cab and at pump panel i. Engine cooler j . Pump cooler k. One (1) 4. 5" minimum steamer, on left side panel 1. 2.5" left side gated suction 1901 Chapter 16 TR 12430- Exhibit D Base Specifications # 13 - 2500 Gallon Mobile Water Supply Fire Apparatus m. 2-1 /2" tank fill pump to tank fill n. Two 2.5" direct gated external tank fills o. Two 2" crosslay hose beds over the pump compartment p. One 2.5" left side discharge q. One 2.5" right side discharge r. Stainless steel piping with 10 year warranty S. Panel gauge package: water tank level, tach, oil pressure, water temperature, voltmeter, light and alarm system t. Side mount pump panel with gauges and all pump controls on driver side pump panel u. 2500 gallon polypropylene booster tank with lifetime warranty V. 3" tank to pump connection w. Minimum 10" x 8" fill tower with minimum 4" overflow tube X. 10" Square tank dump valve with manual control with 3-way dump capability 6. APPARATUS BODY a. Bidders to bid on each of their offered construction types: • Extruded aluminum • Formed aluminum • Formed galvanneal steel • Formed stainless steel b. Bidders to state thicknesses, alloys and construction methods of all materials used in body construction C. Hard suction rack for two (2) lengths 10" x 4.5" minimum of hard suction d. Compartments: low side compartments both sides of body forward of and behind rear wheels; bidders to accurately state the total cubic footage of compartment space, along with each compartment size e. Lights in compartments to meet NFPA 1901 Chapter 13.10.5 f. Back up alarm g. Hose bed with hose restraints to be NFPA compliant; including one (1) adjustable divider h. Steps and handrails for climbing from ground to hose bed - bidders to state exact design i. Lights at each step J. Stop/turn/back up lights k. DOT clearance and marker lights 1. License plate light m. Rear deck lights n. Rub rail along each side of body and rear of body o. Running boards at each pump panel p. Brushed stainless steel or black non -glare aluminum pump panels q. Hose bed lighting must be provided per NFPA 1901 Chapter 13.10.2 7. EMERGENCY WARNING a. NFPA Zone A lower and upper level lighting b. NFPA Zone B / D lower level lighting C. NFPA Zone C upper and lower level lighting d. Electronic 200 watt siren/PA with minimum 100 watt speaker recessed in bumper TR 12430- Exhibit D Base Specifications #13 - 2500 Gallon Mobile Water Supply Fire Apparatus 8. PAINT FINISH a. Body to be painted single tone with 10 year pro -rated paint and corrosion perforation warranty b. Wheels painted to match the cab and body C. Cab paint to be covered by cab manufacturer's paint warranty a. 1 year bumper to bumper mechanical, excluding normal wear and tear items b. 10 year body structural C. 10 year paint pro -rated on body d. 10 year corrosion perforation on body e. OEM Chassis manufacturer's standard warranty f. 5 year fire pump warranty g. Lifetime warranty on water tank TR 12430- Exhibit D FLORIDA COLTNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION 8c FLORIDA ASSOCIATION OF COUNTIES 2012 FREIGHTLINER M2-106 Specification # 13 (2500 Gallon Mobile Water Supply Fire Apparatus) The Freightliner M2-106, 2500 Gallon Mobile Water Supply Fire Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: Crimson Star Tanker $212 9 368.00 Extruded Aluminum Crimson Fire (Public Safety... ) E-ONE TTSA $207 9 330.00 Extruded Aluminum Hall -Mark Fire Apparatus (E-ONE) FFA T2500 Tanker $2491,330.00 Extruded Aluminum Ferrara Fire Apparatus, Inc. While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for mobile water supply Chapter 7, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have items required to vary from agency by the purchaser identified and equipped the meet all current NFPA. S' to agency, any additional o shall be made through the base unit with those specifications and equipment ince equipment needs and preferences are going to ptions required or changes to the base unit desired manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D r FLORIDA ASSOCIATIONOF COUNTIES All About Florida FLORIDA FIRE CHIEFS" ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 INTERNATIONAL WORKSTAR Specification # 13 (2500 "Gallon Mobile Water Supply Fire Apparatus) The International Workstar, 2500 Gallon Mobile Water Supply Fire Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: Crimson Star Tanker $2119764.00 Extruded Aluminum Crimson Fire (Public Safety...) E-ONE TTSA $2109127.00 Extruded Aluminum Hall -Mark Fire Apparatus (E-ONE) FFA T2500 Tanker $2471,484.00 Extruded Aluminum Ferrara Fire Apparatus, Inc. While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for mobile water supply Chapter 7, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D F�L+C�p�RqI{{D'�yr�//A COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 FREIGHTLINER M2-106 Specification # 13 (2500 Gallon Mobile Water Supply Fire Apparatus) The Freightliner M2-106, 2500 Gallon Mobile Water Supply Fire Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: American LaFrance T/A Tanker KME Flatback FL 132600 $2559828.00 $2369125.00 Formed Aluminum Formed Aluminum American LaFrance, LLC Kovatch Mobile Equip. Corp. (KME) Pierce Contender Series $2069391.00 Formed Aluminum Pierce Manufacturing, Inc. Toyne FFCSA-2500 $2339500.00 Formed Aluminum Toyne, Inc. (Southeastern... ) FSA Tanker 13 $2039,365.00 Formed Aluminum Rosenbauer South Dakota, LLC While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for mobile water supply Chapter 7, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASSOCIATION OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION 8c FLORIDA ASSOCIATION OF COUNTIES 2012 INTERNATIONAL WORKSTAR Specification # 13 (2500 Gallon Mobile Water Supply Fire Apparatus) The International Workstar, 2500 Gallon Mobile Water Supply Fire Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: American LaFrance $2809281.00 Formed Aluminum American LaFrance,' T/A Tanker KME Flatback FL 132500 $2319803.00 Formed Aluminum LLC Kovatch Mobile Equip. Corp. (KME) Pierce Contender Series $211, 598.00 Formed Aluminum Pierce Manufacturing, Inc. Toyne FFCSA-2500 $2379250.00 Formed Aluminum Toyne, Inc. (Southeastern...) FSA Tanker 13 $207,103.00 Formed Aluminum Rosenbauer South Dakota, LLC While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for mobile water supply Chapter 7, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D �. FLORIDA ASSOCIATION OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 FREIGHTLINER M2-106 Specification # 13 (2500 Gallon Mobile Water Supply Fire Apparatus) The Freightliner M2-106, 2500 Gallon Mobile Water Supply Fire Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: KME Flatback FL 132500 $2279000.00 Formed Gavanneal Steel Kovatch Mobile Equip. Corp. (KME) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for mobile water supply Chapter 7, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASSOCINTION Of' COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 INTERNATIONAL WORKSTAR Specification # 13 (2500 Gallon Mobile Water Supply Fire Apparatus) The International Workstar, 2500 Gallon Mobile Water Supply Fire Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSKs base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: KME Flatback FL 132500 $222, 681.00 Formed Gavanneal Steel Kovatch Mobile Equip. Corp. (KME) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for mobile water supply Chapter 7, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASSOCLN-MN OF* COUNTIS All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION 8c FLORIDA ASSOCIATION OF COUNTIES 2012 FREIGHTLINER M2-106 Specification # 13 (2500 Gallon Mobile Water Supply Fire Apparatus) The Freightliner M2-106, 2500 Gallon Mobile Water Supply Fire Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: Crimson Star Tanker $2179103.00 Formed Stainless Steel Crimson Fire (Public Safety...) Toyne FFCSA-2500 $2409 200.00 Formed Stainless Steel Toyne, Inc. (Southeastern...) KME Flatback FL132500 $2439952.00 Formed Stainless Steel Kovatch Mobile Equip. Corp. (KME) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for mobile water supply Chapter 7, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D , j"�LORIr^�.�.A. COUNTIES AU About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 INTERNATIONAL WORKSTAR Specification #13 (2500 Gallon Mobile Water Supply Fire Apparatus) The International Workstar, 2500 Gallon Mobile Water Supply Fire Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: Crimson Star Tanker $2149970.00 Formed Stainless Steel Crimson Fire (Public Safety...) Sutphen CTS-2500 Tanker $2839629.00 Formed Stainless Steel Sutphen Cororation KME Flatbaek FL132600 $2399636.00 Formed Stainless Steel Kovatch Mobile Equip. Corp. (KME) Toyne FFCSA-2500 $2469500.00 Formed Stainless Steel Toyne, Inc. (Southeastern...) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for mobile water supply Chapter 7, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D ,Fyw�Lv�O^�R`I�DON yAF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES Base Specifications SPECIFICATION # 14 - WILDLAND FIRE APPARATUS ALL ITEMS FACTORY INSTALLED UNLESS OTHERWISE INDICATED FORD, DODGE, INTERNATIONAL OR APPROVED EQUIVALENT 1. DOCUMENTATION. DELIVERY, TRAINING a. When requested by end user, bidders to accurately state wheelbase, cab to axle, overall length, bumper swing turn radius, curb -to -curb turning radius, overall height, overall width, GVWR, angle of approach, angle of departure in submitted specification b. Approval drawings provided prior to construction commencement C. Two (2) sets of operator and service manuals d. Delivery to be F.O.B. customer's location e. Vehicle weight measured by certified scale 2. COMMERCIAL 2-DOOR CHASSIS a. Cab to axle - 60" b. GVWR - 19,000 lbs C. Heavy service suspension d. Turbo diesel engine with heavy duty cooling e. Manufacturer's standard front and rear axles f. Power steering g. Tires - all season with steel wheels h. Alternator(s) meeting 12-volt system requirements i. Battery system to meet 12-volt system requirements j . Fuel tank - minimum 40 gallon k. Front tow hooks 3. POWER TRAIN a. Diesel engine b. Automatic transmission C. OEM fuel tank, largest available TR 12430- Exhibit D Base Specifications # 14 - Wildland Pire Apparatus d. Limited slip differential, if available as standard equipment 4. 2-DOOR CAB a. Seating for three (3) - full width vinyl bench seat b. Single tone cab paint finish with OEM standard paint warranty C. Air conditioning and heating d. Mirrors with separate flat and convex sections - extended trailer towing mirrors e. Dual type headlights f. Forward facing turn and warning lights g. Minimum two (2) under cab step lights h. Engine compartment light i. Slip resistant running boards under cab doors per NFPA 1906 5. FIRE PUMP & PLUMBING a. Minimum 18 HP gasoline engine driven pump (NFPA 1906) with electric start capable of 150 gpm @ 100 psi b. Primer C. Lighted pump control panel d. Throttle e. Pump cooler or recirculation line f. 2-1 /2" suction gated for drafting g. 1" tank fill h. One 1-1/2" discharge i. One 1" discharge j . Gauge package: Sight type water tank level in booster tank, single master pressure gauge k. 300 gallon skid type polypropylene booster tank with lifetime warranty 1. 2 1/2" tank to pump connection m. Minimum 8" square fill tower with minimum 4" overflow tube n. Electric rewind hose reel with 1 50 ft. of 1" red rubber booster hose 6. APPARATUS BODY a. Extruded aluminum all welded body with bolt on modular aluminum diamond plate compartments, two (2) per side b. Bidders to state thickness, alloys and construction methods of all materials used in body construction C. Bidders to accurately state the total cubic footage of compartment space, along with each compartment size d. One (1) light in each compartment e. Backup alarm f. Stirrup type step for climbing from ground to flat bed - bidders to state exact design g. Lights at each step h. Stop/turn/backup lights i. DOT clearance and marker lights j . License plate light k. Rear deck lights 1. No wood used in mounting TR 12430- Exhibit D Base Sped .ftcations #14 - Wildland Fire Apparatus 7. EMERGENCY WARNING a. Fully compliant with NFPA 1906, Wildland Fire Apparatus b. Electronic 200 watt siren/PA with minimum 100 watt speaker S. PAINT FINISH a. Apparatus body left unpainted a. One (1) year bumper to bumper mechanical, excluding normal wear and and tear items b. OEM Chassis manufacturer's standard warranty TR 12430- Exhibit D p+F)v��?(YL�/[ }ORII�.�y (y. COUNTIES All About Florida FLORIDA FIRE CHIEFS" ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 FORD F-550 Specification # 14 (Wildland Fire Apparatus) The Ford F-550, Wildland Fire Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: Wildland Brush BASE PRICE: $859970.00 MANUFACTURER: American LaFrance, LLC MODEL: BABE PRICE: MANUFACTURER: MODEL: BABE PRICE: MANUFACTURER: Wildland $849 586.00 Hall -Mark Fire Apparatus (E-ONE) Pierce F550 Wildland $889067.00 Pierce Manufacturing, Inc. Wildland Brush $999060.00 Ferrara Fire Apparatus, Inc. KME Wildland FL 14WFA $1009,597.00 Kovatch Mobile Equip. Corp. (KME) Wildland Brush $939300.00 Toyne, Inc. (Southeastern...) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1906, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA IXQ COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 DODGE RAM 5500 Specification # 14 (Wildland Fire Apparatus) The Dodge Ram 5500, Wildland Fire Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: Wildland Brush BASE PRICE: $89, 020.00 MANUFACTURER: American LaFrance, LLC MODEL: Wildland BASE PRICE: $851,661.00 MANUFACTURER: Hall -Mark Fire Apparatus (E-ONE) Wildland Brush $1021,589.00 Ferrara Fire Apparatus, Inc. KME Wildland FL 14WFA $1009071.00 Kovatch Mobile Equip. Corp. (KME) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1906, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASSOCTNTION OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIEITION OF COUNTIES 2012 INTERNATIONAL DURASTAR 4300M7 Specification # 14 (Wildland Fire Apparatus) The International Durastar 4300M7, Wildland Fire Apparatus, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSNs base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: Wildland Brush BASE PRICE: $959594.00 MANUFACTURER: American LaFrance, LLC MODEL: Wildland Brush BABE PRICE: $1349700.00 MANUFACTURER: Toyne, Inc. (Southeastern... ) KME Wildland FL 14WFA $1319480.00 Kovatch Mobile Equip. Corp. (KME) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1906, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D F��I..,+�y�.'.OR. pI4DA,yg COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES Base Specifications TION # 1 ALL ITEMS FACTORY INSTALLED UNLESS OTHERWISE INDICATED FREIGHTLINER, INTERNATIONAL OR APPROVED EQUIVALENT 1. COMMERCIAL 2-DOOR CHASSIS a. Two wheel drive b. 110,000 psi heat treated steel frame rail system C. 12,000 pound minimum front axle, suspension, tubeless radial tires, steel disc wheels; 23,000 pound minimum rear axle, suspension, tubeless radial tires, steel disc wheels d. Vehicle Data Recorder per Chapter 4.11 with required software e. Electronic Stability Control shall be provided in compliance with NFPA 1901 Chapter 4.13.1.2 if the manufacturer cannot comply with Chapters 4.13.1.1 through 4.13.1.1.3.2. f. Tire pressure monitoring system per Chapter 4.13.4 g. Chrome or stainless steel front bumper h. Tow hooks or eyes front and rear attached to the frame i. Front and rear mud flaps j . S-cam air brakes or equivalent, as large as possible, with automatic slack adjusters k. Minimum 13.2 cfm gear driven air compressor 1. Air dryer, turn drain valves on reservoirs m. ABS brakes n. Power steering with tilt/telescopic wheel, if available 2. POWERTRAIN a. Minimum 330 horsepower turbocharged diesel engine, b. Engine exhaust at front of right rear wheels C. Secondary engine braking d. Drivelines to meet engine torque rating e. Automatic transmission f. 50 gallon minimum fuel tank g. OEM oil, fuel, transmission filters 850 lb. torque rating, minimum TR 12430- Exhibit D f Base Specifications #15 -Commercial Pumper 3. 2-DOOR CAB a. Seating for two (2) - bucket style vinyl seats with NFPA compliant seat belts and seat belt warning system b. Console between seats for storage of radios, 12-volt switches, and maps/notebooks C. Air conditioning and heating d. Engine compartment light e . Dome/step lights meeting NFPA 1901 f. Single tone cab paint finish with OEM standard paint warranty g. Driver remote controlled mirrors with separate flat and convex sections h. Dual type headlights i. Forward facing turn and warning lights j . Minimum two (2) under cab step lights k. Cab and compartment door ajar light and buzzer 1. Engine compartment light m. 270 amp alternator n. Minimum two (2) 750 CCA batteries o. Load manager with automatic high idle function p. Dual air horns with dual in -cab controls q. Receptacle near driver's door with onboard battery charger 4. LIGHTS AND SIRENS a. NFPA compliant warning lighting package - manufacturer's standard package b. Electronic 200 watt siren/PA with minimum 100 watt speaker recessed in bumper 5. BODY a. Bidders to bid on each of their offered construction types: • Extruded aluminum • Formed aluminum • Formed galvanneal steel • Formed stainless steel b. Bidders to state thicknesses, alloys and construction methods of all materials used in body construction C. Minimum of 3 compartments driver side of body, full height compartments d. Minimum of 2 low side compartments right side of body e. Lights in compartments to meet NFPA 1901 Chapter 13.10.5 f. One (1) full height, full depth compartment rear of body g. Back up alarm h. Right side brackets for 24' 2-section, 14' roof, 10' attic ladders and 2 pike poles, ladders to be included i. Hose bed with hose restraints to be NFPA compliant; including one (1) adjustable divider j . Steps and handrails for climbing from ground to hose bed - bidders to state exact design k. Lights at each step 1. Stop/turn/back up lights m. DOT clearance and marker lights n. License plate light o. Two (2) rear deck lights p. Rub rail along each side of body and rear of body q. Running boards at each pump panel TR 12430- Exhibit D Base Specifications #I5 - Commercial Pumper r. Brushed stainless steel or black non -glare aluminum pump panels S. Hose bed lighting must be provided per NFPA 1901 Chapter 13.10.2 t. Minimum 4" reflective stripe on cab and body, chevron striping on rear of body per NFPA 1901 6. PUMP a. 1250 gpm drive shaft driven split shaft pump per NFPA 1901 Chapter 16 b. One 3" deck gun discharge C. Four 2.5" discharge outlets (includes one (1) rear 2-1/2"' discharge) d. One 2.5" suction inlet on left pump panel e. Two 6" steamer inlets with caps f. Discharge and inlet pressure reliefs g. Two 1.75" crosslays with 2" piping h. One 3" tank to pump line i. One 2" tank fill line j . 30 degrees turn downs k. Anti -vibration gauges 1. Color coded pump panel tags m. Stainless steel plumbing with 10-year warranty n. Side mount pump panel with all pump controls, instruments, and gauges located on the driver side pump panel (not in a compartment) o. 15 ft. of soft suction hose sized for capacity of fire pump 7. WATER TANK a. 750-gallon T-type tank (U.S.) poly. b. Lifetime warranty C. 12" x 12" fill tower 8. COMPARTMENTS a. Manufacturer will submit cubic feet and size of compartments per request a. 1 year bumper to bumper mechanical, excluding normal wear and tear items b. 10 year body structural C. 10 year paint pro -rated on body d. 10 year corrosion perforation on body e. OEM Chassis manufacturer's standard warranty f. 5 year fire pump warranty g. Lifetime tank warranty TR 12430- Exhibit D FLORIDA COCJNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION 8z FLORIDA ASSOCIATION OF COUNTIES 2012 FREIGHTLINER M2 Specification # 15 (Commercial Pumper - 2 Door) The Freightliner M2, Commercial Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: Crimson Star Pumper $1989057.00 Extruded Aluminum Crimson Fire (Public Safety...) E-ONE TDPM $1709517.00 Extruded Aluminum Hall -Mark Fire Apparatus (E-ONE) FFA RP751 Pumper $2089373.00 Extruded Aluminum Ferrara Fire Apparatus, Inc. FSA Pumper 13 $2081,768.00 Extruded Aluminum Rosenbauer South Dakota, LLC While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above unit only. The Florida Fire Chiefs' Assc of Counties have identified and equipl items required to meet all current NF vary from agency by the purchaser referenced vehicle specification comes equipped as a base Jation, Florida Sheriffs Association and Florida Association ed the base unit with those specifications and equipment 'A. Since equipment needs and preferences are going to to agency, any additional options required or changes to the base unit desired shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA COUNTIES All About Florida FLO DA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION 8c FLORIDA ASSOCIATION OF COUNTIES 2012 INTERNATIONAL DURASTAR Specification # 15 (Commercial Pumper - 2 Door) The International Durastar, Commercial Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: Crimson Star Pumper $197 9 690. 00 Extruded Aluminum Crimson Fire (Public Safety... ) E-ONE TDPM $176,125.00 Extruded Aluminum Hall -Mark Fire Apparatus Sutphen C 1 Pumper $2169792.00 Extruded Aluminum Sutphen Corporation (E-ONE) FFA RP751 Pumper $2069838.00 Extruded Aluminum Ferrara Fire Apparatus, Inc. FSA Pumper 13 $2109,876.00 Extruded Aluminum Rosenbauer South Dakota, LLC While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION 8c FLORIDA ASSOCIATION OF COUNTIES 2012 FREIGHTLINER M2 Specification # 15 (Commercial Pumper - 2 Door) The Freightliner M2, Commercial Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: American LaFrance S/M Pumper $2129670.00 Formed Aluminum American LaFrance, LLC KME Challenger FL 15COML $1999783.00 Formed Aluminum Kovatch Mobile Equip. Corp. (KME) FSA Pumper 13 $1829408.00 Formed Aluminum Rosenbauer South Dakota, LLC Crimson Star Pumper $188, 773.00 Formed Aluminum Crimson Fire (Public Safety... ) Pierce Contender Series $179, 598.00 Formed Aluminum Pierce Manufacturing, Inc. Topne FFCSA Pumper $208,000.00 Formed Aluminum Toyne, Inc. (Southeastern... ) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA C:OZJNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 INTERNATIONAL DURASTAR Specification # 1.5 (Commercial Pumper - 2 Door) The International Durastar, Commercial Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: American LaFrance S/M Pumper $2229246.00 Formed Aluminum American LaFrance, LLC KME Challenger FL15COML $1979654.00 Formed Aluminum Kovatch Mobile Equip. Corp. (KME) FSA Pumper 13 $1849516.00 Formed Aluminum Rosenbauer South Dakota, LLC Crimson Star Pumper $1889,817.00 Formed Aluminum Crimson Fire (Public Safety...) Pierce Contender Series $1849671.00 Formed Aluminum Pierce Manufacturing, Inc. Toyne FFCSA Pumper $2139500.00 Formed Aluminum Toyne, Inc. (Southeastern...) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for mobile water supply Chapter 7, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from .agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA. COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION 8c FLORIDA ASSOCIATION OF COUNTIES 2012 FREIGHTLINER M2 Specification # 15 (Commercial Pumper - 2 Door) The Freightliner M2, Commercial Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSKs base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: KME Challenger FL 15COML BASE PRICE: $1959172.00 BODY: Formed Galvanneal Steel MANUFACTURER: Kovatch Mobile Equip. Corp. (KME) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASISCK"J'ATIONT OF COUNTIES All About Florida FLORIDA FIRE CHIEFS" ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION 8c FLORIDA ASSOCIATION OF COUNTIES 2012 INTERNATIONAL DURASTAR Specification # 15 (Commercial Pumper - 2 Door) The International Durastar, Commercial Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: &UNUFACTURER: KME Challenger FL 15COML $1929712.00 Formed Galvanneal Steel Kovatch Mobile Equip. Corp. (KME) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, ,(2009 edition), applicable for mobile water supply Chapter 7, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA NSSOCLNTION OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 FREIGHTLINER M2 Specification # 15 (Commercial Pumper - 2 Door) The Freightliner M2, Commercial Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSKs base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: American LaFrance S/M Pumper $2139763.00 Formed Stainless Steel American LaFrance, LLC E-ONE PSTS $1999325.00 Formed Stainless Steel Hall -Mark Fire Apparatus (E-ONE) Toyne FFCSA Pumper $212, 000.00 Formed Stainless Steel Toyne, Inc. (Southeastern... ) Crimson Star Pumper $200, 801.00 Formed Stainless Steel Crimson Fire (Public Safety...) K E Challenger FL 15COML $2049530.00 Formed Stainless Steel Kovatch Mobile Equip. Corp. (KME) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. . TR 12430- Exhibit D FLORIDA ASSOCIATION CW COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 INTERNATIONAL DURASTAR Specification # 15 (Commercial Pumper - 2 Door) The International Durastar, Commercial Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: American LaFrance S/M Pumper $2239902.00 Formed Stainless Steel American LaFrance, LLC E-ONE PSTS $2059237.00 Formed Stainless Steel Hall -Mark Fire Apparatus (E-ONE) Toyne FFCSA Pumper $217, 500.00 Formed Stainless Steel Toyne, Inc. (Southeastern... ) Crimson Star Pumper $2021,899.00 Formed Stainless Steel Crimson Fire (Public Safety... ) KME Challenger FL 15COML $2029043.00 Formed Stainless Steel Kovatch Mobile Equip. Corp. (KME) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASSOCIAJION Of COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES Base Specifications TION - LEVEL I CUSTOM PUMPER ALL ITEMS FACTORY INSTALLED UNLESS OTHERWISE INDICATED THE CUSTOM CAB AND CHASSIS SHALL BE PROVIDED BY THE BODY MANUFACTURER 1. CHASSIS a. 110,000 psi heat treated steel frame rail system b. 10 gauge polished stainless steel 16"' to 24" extended front bumper with aluminum diamond plate gravel shield C. Tow hooks or eyes front and rear attached to the frame d. 18,000 pound minimum front axle, suspension, tubeless radial tires, steel disc wheels e. 24,000 pound minimum rear axle, suspension, tubeless radial tires, steel disc wheels f. Front and rear mud flaps g. NFPA 1901 Chapter 4.15.3 top speed rating requirement h. S-cam air brakes or equivalent, as large as possible, with automatic slack adjusters i. Manufacturer's standard compressor j . Minimum 4200 cubic inch air reservoir capacity k. Air dryer, color coded air lines, turn drain valves on reservoirs 1. ABS brakes m. Power steering with tilt/telescopic wheel n. Vehicle data recorder (VDR) in compliance with Chapter 4.11 with required software meeting 4.11.8 o. Electronic Stability Control shall be provided in compliance with NFPA 1901 Chapter 4.13.1.2 if the manufacturer cannot comply with Chapters 4.13.1.1 through 4.13.1.1.3.2. p. Tire pressure monitoring system with Chapter 4.13.4 2. POWERTRAIN a. Minimum 350 horsepower turbocharged diesel engine with 1000 ft. lb. torque rating b. Engine exhaust at front of right rear wheels C. Secondary engine braking d. Engine manufacturer's statement of engine installation approval with approved cooling system e. Drivelines to meet engine torque rating f. Silicone coolant hoses with constant torque clamps g. Automatic transmission TR 12430- Exhibit D Base Specifications # 16 - Level I Custom Pumper h. 50 gallon minimum fuel tank' i. OEM oil, fuel, transmission filters 3. CAB a. Manufacturer's standard medium length tilt aluminum cab meeting NFPA 1901 Chapter 14.3.2 b. Seating for four, three in SCBA seats with SCBA brackets C. Air ride driver seat, all others fixed position d. All persons in 3-point seat belts per Chapter 14, seats equipped with seat belt/occupant detection/warning system per Chapter 14 e. Electric over hydraulic cab tilt with manual back-up f. Single tone cab paint finish with 10 year paint warranty pro -rated g. Air conditioning and heating h. Remote controlled mirrors (from driver's position) with separate flat and convex sections i. DOT compliant headlights j . Forward facing turn and warning lights k. Cornering turn and warning lights 1. Minimum four (4) dome lights with red and clear bulbs m. Minimum four (4) under cab step lights n. Cab and compartment door ajar light and buzzer 0. One (1) engine compartment light p. Color coded and function coded wiring q. Alternator sized according to amp draw report r. Minimum four (4) 750 CCA batteries S. Load manager with automatic high idle function t. Dual air horns with dual in -cab controls 4. LIGHTS AND SIRENS a. NFPA compliant upper and lower level b. Siren/PA - 200 watts C. 100-watt speaker d. Two rear deck lights 5. BODY warning light package a. Bidders to bid on each of their offered construction types: • Extruded aluminum • Formed aluminum • Formed galvanneal steel • Formed stainless steel b. Bidders to state thicknesses, alloys and construction methods of all materials used in body construction C. Minimum of 3 compartments driver side of body, full height compartments d. Minimum of 2 low side compartments right side of body e. Lights in compartments to meet NFPA 1901 Chapter 13.10.5 f. One (1) full height, full depth compartment rear of body g. Back up alarm h. Right side brackets for 24' 2-section, 14' roof, 10' attic ladders and 2 pike poles, ladders to be included i. Hose bed with hose restraints to be NFPA compliant; including one (1) adjustable divider j . Steps and handrails for climbing from ground to hose bed - bidders to state exact design TR 12430- Exhibit D Base Sped fications #16 - Level I Custom Pumper k. Lights at each step 1. Stop/turn/back up lights m. DOT clearance and marker lights n. License plate light o. Two (2) rear deck lights p. Rub rail along each side of body and rear of body q. Running boards at each pump panel r. Brushed stainless steel or black non -glare aluminum pump panels S. Hose bed lighting must be provided per NFPA 1901 Chapter 13.10.2 t. Minimum 4" reflective stripe on cab and body, chevron striping on rear of body per NFPA 1901 6. PUMP a. 1250 gpm drive shaft driven split shaft pump per NFPA 1901 Chapter 16 b. One 3" deck gun discharge C. Four 2.5" discharge outlets (includes one (1) rear 2-1/2" discharge) d. One 2.5" suction inlet on left pump panel C. Two 6" steamer inlets with caps f. Discharge and inlet pressure reliefs g. Two 1.75" crosslays with 2" piping h. One 3" tank to pump line i. One 2" tank fill line j . 30 degrees turn downs k. Anti -vibration gauges 1. Color coded pump panel tags m. Stainless steel plumbing with 10-year warranty n. Side mount pump panel with all pump controls, instruments, and gauges located on the drivers side pump panel (not in a compartment) o. 15 ft. of soft suction hose sized for capacity of fire pump 7. WATER TANK a. 750-gallon T-type tank (U.S.) poly. b. Lifetime warranty C. 12" x 12" fill tower 8. COMPARTMENTS a. Manufacturer will submit cubic feet and size of compartments with bid. 9. WARRANTY a. 1 year bumper to bumper mechanical, excluding normal wear and tear items b. 10 year cab and body structural C. 10 year paint pro -rated d. 10 year corrosion perforation on cab and body e. Lifetime frame warranty f. 2 year axle warranty g. 5 year engine warranty h. 5 year transmission warranty i. 5 year fire pump warranty j . Lifetime booster tank TR 12430- Exhibit D FLORIDA COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 LEVEL I CUSTOM PUMPER Specification # 16 (Custom Chassis - 4 Door) The Custom Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: E-One Typhoon Pumper S Series Custom BASE PRICE: $267, 508.00 $308, 970.00 BODY: Extruded Aluminum Extruded Aluminum MANUFACTURER: Hall -Mark Fire Apparatus (E-ONE) Sutphen Corporation While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORID.A►. COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 LEVEL I CUSTOM PUMPER Specification # 16 (Custom Chassis - 4 Door) The Custom Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: KME Challenger FL 16LVL 1 $2739541.00 Formed Aluminum Kovatch Mobile Equip. Corp. (KME) S-Series Custom $2909993.00 Formed Aluminum Sutphen Corporation Pierce Saber Series $2691,266.00 Formed Aluminum Pierce Manufacturing, Inc While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 LEVEL I CUSTOM PUMPER Specification # 16 (Custom Chassis - 4 Door) The Custom Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: KME Challenger FL 16LVL 1 $268,943.00 Formed Galvanneal Steel Kovatch Mobile Equip. Corp. (KME) Pierce Velocity SLT Series $3379 573.00 Formed Galvanneal Steel Pierce Manufacturing, Inc While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA AISSOCLAIXION OF, COUNTIES All About Norida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 LEVEL I CUSTOM PUMPER Specification # 16 (Custom Chassis - 4 Door) The Custom Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: E-ONE Typhoon Pumper BASE PRICE: $2719 734.00 BODY: Formed Stainless Steel MANUFACTURER: Hall -Mark Fire Apparatus (E-ONE) MODEL: Pierce Impel SS Series BASE PRICE: $3089890.00 BODY: Formed Stainless Steel MANUFACTURER: Pierce Manufacturing, Inc. KNIE Challenger FL 16LVL1 $2789274.00 Formed Stainless Steel Kovatch Mobile Equip. Corp. (KME) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS AS30CIATION 8c FLORIDA ASSOCIATION OF COUNTIES 2012 LEVEL I CUSTOM PUMPER Specification #16 (Spartan Chassis - 4 Door) The Custom Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: Crimson Metro Star Pumper L1 $2699507.00 Extruded Aluminum Crimson Fire (Public Safety... ) Spartan Force 16 $2729842.00 Extruded Aluminum Rosenbauer South Dakota, LLC While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 LEVEL I CUSTOM PUMPER Specification # 16 (Spartan Chassis - 4 Door) The Custom Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: Crimson Metro Star Pumper L 1 $2609656.00 Formed Aluminum Crimson Fire (Public Safety... ) MODEL: Toyne Spartan Metro Star FFCSA BASE PRICE: $ 286, 000.00 BODY: Formed Aluminum MANUFACTURER: Toyne, Inc. (Southeastern... ) Spartan Force 16 $2489128.00 Formed Aluminum Rosenbauer South Dakota, LLC While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 LEVEL I CUSTOM PUMPER Specification # 16 (Spartan Chassis - 4 Door) The Custom Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: Crimson Metro Star Pumper L1 $2729159.00 Formed Stainless Steel Crimson Fire (Public Safety... ) Topne Spartan Metro Star FFCSA $2909 250.00 Formed Stainless Steel Toyne, Inc. (Southeastern...) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA O COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 LEVEL I CUSTOM PUMPER Specification # 16 (HME Chassis - 4 Door) The Custom Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSNs base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: Intruder BASE PRICE: $2779618.00 BODY: Extruded Aluminum MANUFACTURER: Ferrara Fire Apparatus, Inc. While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA COUNTIES All About Florida FLORIDA FIRE CHIEFS' AS30CIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 LEVEL I CUSTOM PUMPER Specification # 16 (HME Chassis - 4 Door) The Custom Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: Toyne 1871W FFSCA BASE PRICE: $293, 500.00 BODY: Formed Aluminum MANUFACTURER: Toyne, Inc. (Southeastern... ) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the ,manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASRXILIMON OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIEITION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 LEVEL I CUSTOM PUMPER Specification # 16 (HME Chassis - 4 Door) The Custom Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: Toyne 1871W FFSCA BASE PRICE: $2979 500.00 BODY: Formed Stainless Steel MANUFACTURER: Toyne, Inc. (Southeastern...) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASSOCIATION OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION 8c FLORIDA ASSOCIATION OF COUNTIES 2012 LEVEL I CUSTOM PUMPER Specification # 16 (American LaFrance Chassis - 4 Door) The Custom Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: American LaFrance Custom S/M Pumper BASE PRICE: $3009634.00 BODY: Formed Aluminum MANUFACTURER: American LaFrance, LLC While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASK COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 LEVEL I CUSTOM PUMPER Specification # 16 (American LaFrance Chassis - 4 Door) The Custom Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: American LaFrance Custom S/M Pumper BASE PRICE: $3019992.00 BODY: Formed Stainless Steel MANUFACTURER: American LaFrance, LLC While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASSC)CT-MON, OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES Base Specifications 17 -LEVEL 11 CUSTOM PUMPER ALL ITEMS FACTORY INSTALLED UNLESS OTHERWISE INDICATED THE CUSTOM CAB AND CHASSIS SHALL BE PROVIDED BY THE BODY MANUFACTURER 1. CHASSIS a. 110,000 psi heat treated steel frame rail system b. 10 gauge polished stainless steel 16" to 24" extended front bumper with aluminum diamond plate gravel shield, 1-1 /2 front jump line with enclosed compartment in center of front bumper to hold minimum 100' of 1-3/4 DJ fire hose C. Tow hooks or eyes front and rear attached to the frame d. 20,000 pound minimum front axle, suspension, tubeless radial tires, polished aluminum wheels with hub and lug trim package e. 24,000 pound minimum rear axle, suspension, tubeless radial tires, polished aluminum wheels with hub and lug trim package f. Front and rear mud flaps g. NFPA 1901 Chapter 4.15.3 top speed rating requirement h. S-cam air brakes or equivalent, as large as possible, with automatic slack adjusters i. Manufacturer's standard compressor j . Minimum 5000 cubic inch air reservoir capacity k. Air dryer, color coded air lines, turn drain valves on reservoirs 1. ABS brakes m. Power steering with tilt/telescopic wheel n. Vehicle data recorder (VDR) in compliance with Chapter 4.11 with required software meeting 4.11.8 0. Electronic Stability Control shall be provided in compliance with NFPA 1901 Chapter 4.13.1.2 if the manufacturer cannot comply with Chapters 4.13.1.1 through 4.13.1.1.3.2. p. Tire pressure monitoring system with Chapter 4.13.4 2. POWERTRAIN a. Turbocharged diesel engine with a minimum 400 horsepower and 1450 ft. lbs. torque rating b. Engine exhaust at front of right rear wheels C. Secondary braking TR 12430- Exhibit D Base Specifications # 17 - Level H Custom Pumper d. Engine manufacturer's statement of engine installation approval with approved cooling system e. Drivelines to meet engine torque rating f. Silicone coolant hoses with constant torque clamps g. EVS 4000 or equivalent automatic transmission h. 65 gallon minimum fuel tank i. OEM oil, fuel, transmission filters 3. CAB a. Extended length tilt aluminum cab (minimum 65"' from center of front axle to rear of cab) with minimum 10" raised rear roof meeting NFPA 1901 Chapter 14.3.2 b. Seating for six, five in SCBA seats with SCBA brackets C. Air ride driver seat, all others fixed position d. All persons in 3-point seat belts per Chapter 14, seats equipped with seat belt/occupant detection/warning system per Chapter 14 e. Electric over hydraulic cab tilt with manual back-up f. Single tone cab paint finish with 10 year paint warranty pro -rated g. Air conditioning and heating h. Remote controlled mirrors (from driver's position) with separate flat and convex sections i. DOT compliant headlights with LED marker and clearance lights j . LED forward facing turn and warning lights k. LED cornering turn and warning lights 1. Minimum four (4) dome lights with red and clear bulbs m. Minimum four (4) under cab step lights n. Cab and compartment door ajar light and buzzer o. One (1) engine compartment light p. Color coded and function coded wiring q. Minimum 320 amp alternator r. Minimum four (4) 750 CCA batteries S. Load manager with automatic high idle function t. Dual air horns with dual in -cab controls 4. LIGHTS AND SIRENS a. NFPA LED compliant lighting package, upper and lower b. Siren/PA - 200 watts C. Mechanical siren with dual controls d. Two 100-watt siren speakers e. Two rear deck lights f. SkW hydraulic generator, 6-place breaker panel, (2) 750 watt telescopic lights mounted on body 5. BODY a. Bidders to bid on each of their offered construction types: • Extruded aluminum • Formed aluminum • Formed galvanneal steel • Formed stainless steel b. Bidders to state thicknesses, alloys and construction methods of all materials used in body construction C. Three full height, full depth rescue style compartments on drivers side TR 12430- Exhibit D Base Specifications #17 - Level II Custom Pumper d. Three full height, full depth lower, half -depth upper rescue style compartments passenger side of body e. Lights in compartments to meet NFPA 1901 Chapter 13.10.5 f. One (1) full height, full depth compartment rear of body g. Back up alarm h. Internal ladder storage compartment right rear of body, to hold NFPA complement of ground ladders and two (2) pike poles i. Hose bed with hose restraints to be NFPA compliant; including one (1) adjustable divider; minimum hosebed size of 70 cubic feet of usable storage j . Steps and handrails for climbing from ground to hose bed - bidders to state exact design k. Lights at each step 1. LED stop/turn/back up lights m. LED DOT clearance and marker lights n. LED license plate light o. Minimum of 4 SCBA bottle storage compartments in rear wheel wells p. Rub rail along each side of body with reflective stripe in rub rail q. Running boards at each pump panel with a recessed hose well with hose restraint strap in the passenger side running board r. Brushed stainless steel or black non -glare aluminum pump panels S. Hose bed lighting must be provided per NFPA 1901 Chapter 13.10.2 t. Minimum 4" reflective stripe on cab and body, chevron striping on rear of body per NFPA 1901 u. Four (4) aluminum adjustable shelves, located by customer V. Two (2) floor mounted aluminum roll -out trays, minimum 2501b. capacity each, located by customer w. Equipment package: One 10' folding attic ladder, one 14' roof ladder, one 24' 2-section extension ladder, two 10' pike poles 6. PUMP a. 1500 gpm drive shaft driven split shaft pump with side mount pump panel per NFPA 1901 Chapter 16 b. One 3" deck gun discharge C. Four 2.5" discharge outlets (includes one (1) rear 2-1/2" discharge) d. One 2.5" suction inlet on left pump panel e. Two 6" steamer inlets with caps f. Discharge and inlet pressure reliefs g. Two 1.75" crosslays with 2" piping h. One 3" tank to pump line i. One 2" tank fill line j . 30 degrees turn downs on all 2-1 /2" or larger discharges k. Anti -vibration gauges 1. Color coded pump panel tags m. Stainless steel plumbing with 10-year warranty n. One 4" LDH discharge, right side pump panel, hand wheel control with 4" discharge valve and piping 7. WATER TANK a. 750-gallon rectangular tank (U.S.) poly. b. Lifetime warranty C. 12" x 12" fill tower TR 12430- Exhibit D Base Specifications # 17 - Level H Custom Pumper 8. COMPARTMENTS a. Manufacturer will submit cubic feet and size of compartments with bid. 9. WARRANTY a. 1 year bumper to bumper mechanical, excluding normal wear and tear items b . 10 year cab and body structural C. 10 year paint pro -rated d. 10 year corrosion perforation on cab and body e. Lifetime frame warranty f. 2 year axle warranty g. 5 year engine warranty h. 5 year transmission warranty i. 5 year fire pump warranty j . Lifetime booster tank TR 12430- Exhibit D FLORIDA ASSOCIATIUN OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 LEVEL II CUSTOM PUMPER Specification # 17 (Custom Chassis - 4 Door) The Custom Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSNs base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: Igniter XD LFD $3999874.00 Extruded Aluminum Ferrara Fire Apparatus, Inc. Commander FSA 17 $3649 916.00 Extruded Aluminum Rosenbauer South Dakota, LLC E-ONE Cyclone Pumper $3739084.00 Extruded Aluminum Hall -Mark Fire Apparatus (E-ONE) Monarch Series Custom $4219112.00 Extruded Aluminum Sutphen Corporation While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASSOCIATION' oF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 LEVEL II CUSTOM PUMPER Specification # 17 (Custom Chassis - 4 Door) The Custom Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: KME Flatback FL 17LVL2 $3579181.00 Formed Aluminum Kovatch Mobile Equip. Corp. (KME) Commander FSA 17 $3409030.00 Formed Aluminum Rosenbauer South Dakota, LLC Pierce Arrow XT Series $3870678.00 Formed Aluminum Pierce Manufacturing, Inc. While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASSOCIATION OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 LEVEL II CUSTOM PUMPER Specification # 17 (Custom Chassis - 4 Door) The Custom Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: KME Flatback FL 17LVL2 $3529582.00 Formed Galvanneal Steel Kovatch Mobile Equip. Corp. (KME) Pierce Quantum Series $395,482.00 Formed Galvanneal Steel Pierce Manufacturing, Inc. While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base, unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA 'AQ1.50CLATION Of COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 LEVEL II CUSTOM PUMPER Specification # 17 (Custom Chassis - 4 Door) The Custom Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: E-ONE Cyclone Pumper $394,151.00 Formed Stainless Steel Hall -Mark Fire Apparatus (E-ONE) Pierce Velocity Series $3999974.00 Formed Stainless Steel Pierce Manufacturing, Inc. KME Flatback FLI7LVL2 $3619913.00 Formed Stainless Steel Kovatch Mobile Equip. Corp. (KME) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA AQ COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION 8c FLORIDA ASSOCIATION OF COUNTIES 2012 LEVEL II CUSTOM PUMPER Specification # 17 (Spartan Chassis - 4 Door) The Custom Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: Crimson Metro Star Pumper L2 Spartan Gladiator 17 BASE PRICE: $3669042.00 $3739656.00 BODY: Extruded Aluminum Extruded Aluminum MANUFACTURER: Crimson Fire (Public Safety...) Rosenbauer South Dakota, LLC While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASSOC,U'MOX OF COUNTIES AU About Rorida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 LEVEL II CUSTOM PUMPER Specification # 17 (Spartan Chassis - 4 Door) The Custom Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: MODEL: BASE PRICE: BODY: MANUFACTURER: Crimson Metro Star Pumper L2 $3419025.00 Formed Aluminum Crimson Fire (Public Safety... ) Toyne Spartan Gladiator $3779000.00 Formed Aluminum Toyne, Inc. (Southeastern... ) Spartan Gladiator 17 $346,660.00 Formed Aluminum Rosenbauer South Dakota, LLC While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA ASSOCIATION OF COUNTIES All About ;Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION 8z FLORIDA ASSOCIATION OF COUNTIES 2012 LEVEL II CUSTOM PUMPER Specification # 17 (Spartan Chassis - 4 Door) The Custom Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSNs base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: Crimson Metro Star Pumper L2 Toyne Spartan Gladiator BASE PRICE: $368, 450.00 $381, 000.00 BODY: Formed Stainless Steel Formed Stainless Steel MANUFACTURER: Crimson Fire (Public Safety...) Toyne, Inc. (Southeastern... While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA A..:� COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION 8c FLORIDA ASSOCIATION OF COUNTIES 2012 LEVEL II CUSTOM PUMPER Specification # 17 (HME Chassis - 4 Door) The Custom Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: Spectr LFD BASE PRICE: $3869017.00 BODY: Extruded Aluminum MANUFACTURER: Ferrara Fire Apparatus, Inc. While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA AISSOCIATION OF' COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 LEVEL II CUSTOM PUMPER Specification # 17 (HME Chassis - 4 Door) The Custom Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: BASE PRICE: BODY: MANUFACTURER: Toyne Spectr $3799000.00 Formed Aluminum Toyne, Inc. (Southeastern...) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA :S:�� COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 LEVEL II CUSTOM PUMPER Specification # 17 (HME Chassis - 4 Door) The Custom Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: Toyne Spectr BASE PRICE: $3831,000.00 BODY: Formed Stainless Steel MANUFACTURER: Toyne, Inc. (Southeastern...) While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced -vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FLORIDA INSOCIIAJION, OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION 8c FLORIDA ASSOCIATION OF COUNTIES 2012 LEVEL II CUSTOM PUMPER Specification # 17 (American LaFrance Chassis - 4 Door) The Custom Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: American LaFrance Custom Rescue Pumper BASE PRICE: $3549804.00 BODY: Formed Aluminum MANUFACTURER: American LaFrance, LLC While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association of Counties have identified and equipped the items required to meet all current NFPA. Si vary from agency by the purchaser Florida Sheriffs Association and Florida Association base unit with those specifications and equipment nce equipment needs and preferences are going to to agency, any additional options required or changes to the base unit desired shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D FI ORIDA ASSOCIATION OF COUNTIES All About Florida FLORIDA FIRE CHIEFS' ASSOCIATION, FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES 2012 LEVEL II CUSTOM PUMPER Specification # 1& (American LaFrance Chassis - 4 Door) The Custom Pumper, purchased through this contract comes with all the standard equipment as specified by the manufacturer for this model and FSA's base vehicle specification(s) requirements which are included and made a part of this contract's vehicle base price as awarded by manufacturer by specification. MODEL: American LaFrance Custom Rescue Pumper BASE PRICE: $3569162.00 BODY: Formed Stainless Steel MANUFACTURER: American LaFrance, LLC While the Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have attempted to identify equipment required to meet all current NFPA 1901, (2009 edition), applicable for pumper fire apparatus Chapter 5 and other required chapters, FMVSS (applicable areas) and NHTSA standards, we realize equipment needs and preferences are going to vary from agency to agency. Any options required or changes required by purchaser shall be made through the vendor listed. Purchasers are advised that the above referenced vehicle specification comes equipped as a base unit only. The Florida Fire Chiefs' Association, Florida Sheriffs Association and Florida Association of Counties have identified and equipped the base unit with those specifications and equipment items required to meet all current NFPA. Since equipment needs and preferences are going to vary from agency to agency, any additional options required or changes to the base unit desired by the purchaser shall be made through the manufacturer listed. NOTE: An official listing of all add/delete options and their prices should be obtained from the appropriate vendor. TR 12430- Exhibit D MUNICIPAL LEASE PROGRAM Mears leasing offers the broadest range of lease plans A Financial Service of available in today's market! We offer Both Municipal Financing TheBanC�,Bdtlk ($1.00 Buyout) and Closed -End Lease Plans (which allow you to return the vehicle at lease end). Our closed -end lease plans are ideal for administrative use or surveillance use. We will cater the lease requirements to meet your mission needs! Whether you are looking for one vehicle or one -hundred vehicles, we have the expertise and the financial stability to assist you. • Marked Patrol Vehicles * Administrative Vehicles • Undercover Vehicles • Sedans, Pick up Trucks, SUV's, Vans, SWAT Trucks, Buses, Fire Engines and all Emergency Response Vehicles • Over 50 YEARS EXPERIENCE in Municipal Finance/Leasing and Fleet Leasing • No Fleet or equipment order too small! Department Name: Fleet Manager or POC: Address: Phone: Fax: How many total vehicles are in your fleet?: Do you presently own or lease your vehicles?: How often do you rotate your fleet?: Do you lease surveillance or administrative vehicles?: MEARS MOTOR LEASING - 3905 El Rey Road —Orlando, FL 32808 Call US at David Pickard 407-253-4462 dpickard@mearsleasing.com Joanne Cornier 407-253-4450 jcornier@mearsleasing.com Bob Crowe 407-253-4469 bcrowe@mearsleasing.com It D Specializing in Government Fleets. 'TTIth Enterprise I►M Fleet M Management, : *,.A I► you'll benefit M full-time professionals implementing solutions for your transportation needs. Enterprise provides services that are an asset for thit Florida Sheriffs Association. Local Services Enterprise provides value -oriented fleet management solutions to help lower fleet costs. We enable you to lower your costs in the areas of fleet management and help bridge your capital budgets to your capital needs. 'vehicle Acquisition Our new vehicle selection may provide a wider choice than is available through the State. Funding Programs With our Municipal Lease or Lease Purchase, we can give you the flexibility of your owned fleet while providing a consistent way of cycling your vehicles at their best economic point. Our flexibility enables you to pay only for your use of the vehicle. Maintenance Programs By utilizing fixed cost for maintaining some of your light -duty vehicles, we allow you to focus on your core service needs. We fix the cost of maintaining your fleet needs. Customized Programs Working Fleets -Public Works Administrative Fleets Law Enforcement Pool Fleets Virtual Fleets WeCar Direct: Online Reservations Automated Key Dispenser Mobile Resource Manager Fuel Card Enterprise stands ready to compete with what we believe is the best value for your transportation needs. For more information contact the following Florida locations: Northeast* ''4 265-4352 Southr r 4 . 9Its are management 02011 Enterprise Fleet Management, Inc. :.101187 9;1,1 ?,1 TR#12558 - EXHIBIT E Florida Sherriff's Association Contract # 11-10-1202 International 430OLP Medium Duty Ambulance Base Price 2019260 Installed Options per Tamarac Fire Rescue Specifications 2014 Price Increase 31435 Chassis upgrades 229475 Chrome Turnout for vertical exhaust 152 Front and rear heavy duty sway bars 11384 Energy Absorbing rear step 911 Fuel Tank covers with compartment 41696 Reverse Camera, including turn signal cameras 29294 Echo Vision rear collision avoidance system 525 Crossfire Dual tire pressure monitor 367 Bumper Wands 232 Custom 177" body 12000 ZICO electric 02 lift 21692 Exterior Compartment modifications 39676 Slide out SCBA storage tray 450 SCBA bottle tube holders 11800 Headroom Increase 740 Body Molding delete 307 Dri-Deck in all exterior compartments 425 Programmable touch pads (2) 19162 Recessed License plate bracket 142 Paint scheme per Tamarac Fire Rescue requirements 21240 Stainless Steel risers streetside 197 Stainless Steel risers curbside 197 Stainless steel lower door panels 275 Linen cabinet with heatlac unit in bottom 1,346 Pull out drawers in main wall cabinet 812 Custom CPR seat cabinet 650 Custom Squad Bench 13110 Cargo Net 450 Reinforce floor for future install of Power Load 750 Upgraded Federal E02B siren 19532 Upgraded led lighting 21779 Rear Docking Lights 319 RemoteControl Go light 414 Pioneer LED Scene Lights 29390 IPLEX panel in Cab dash 250 Max Cool Air Conditioner 19380 Upgraded LED dome lights 19896 Wireless Firecom Intercom System 59900 GTT G PS style Opticom system 39400 Lettering to match current fleet 3,500 Total options 80,652 Total cost including options 281,912 Proposal subtotal 281,912 Less Hall -Mark Fire Discount 21000 Less Horton Discount 21000 Final proposal to customer 277 912